NAME

       qmi-network - Simple network management of QMI devices

SYNOPSIS

       qmi-network [OPTIONS] [DEVICE] [COMMAND]

DESCRIPTION

       Simple network management of QMI devices

   Commands:
       start  Start network connection

       stop   Stop network connection

       status Query network connection status

OPTIONS

       --profile=[PATH]
              Use the profile in the specified path

       --help Show help options

       --version
              Show version

       Notes:

              1) [DEVICE] is given as the full path to the cdc-wdm character device, e.g.:

              /dev/cdc-wdm0

              2)  The  qmi-network script requires a profile to work. Unless explicitly specified
              with `--profile', the file is assumed to be available in the following path:

              /etc/qmi-network.conf

              3) The APN to use should be configured in the profile, in the following  way  (e.g.
              assuming APN is called 'internet'):

              APN=internet

              4) Optional APN user/password strings may be given in the following way:

              APN_USER=user APN_PASS=password

              5) Optional IP_TYPE strings may be given in the following way:

              IP_TYPE=[4|6]

              6)  If  you want to instruct the qmi-network script to use the qmi-proxy setup, you
              can do so by configuring the following line in the profile:

              PROXY=yes

              7) To instruct the qmi-network script to use an already existing Profile ID, or  to
              create a new one on the fly, use the following configuration in the profile:

       PROFILE=number
              # to use the profile-id number

       PROFILE=auto
              # to create a temporary profile on the fly

              8)  Once  the  qmi-network script reports a successful connection you still need to
              run a DHCP client on the associated WWAN network interface.

COPYRIGHT

       Copyright © 2013-2021 Aleksander Morgado License  GPLv2+:  GNU  GPL  version  2  or  later
       <http://gnu.org/licenses/gpl-2.0.html>
       This  is free software: you are free to change and redistribute it.  There is NO WARRANTY,
       to the extent permitted by law.

SEE ALSO

       The full documentation for qmi-network is maintained as a Texinfo manual.  If the info and
       qmi-network programs are properly installed at your site, the command

              info qmi-network

       should give you access to the complete manual.