Ubuntu Manpage: rec_control - Command line tool to control a running Recursor

Provided by: pdns-recursor_4.6.0-1ubuntu1_amd64

NAME

       rec_control - Command line tool to control a running Recursor

SYNOPSIS

       rec_control [OPTION]... COMMAND [COMMAND-OPTION]...

DESCRIPTION

       rec_control  allows  the  operator to query and control a running instance of the PowerDNS
       Recursor.

       rec_control talks to the recursor via a the 'controlsocket'. Which is usually  located  in
       /var/run  .  The  --socket-dir  or  the --config-dir and --config-name switches control to
       which process rec_control connects.

EXAMPLES

       To see if the Recursor is alive, run:

          # rec_control ping

       To stop the recursor by hand, run:

          # rec_control quit

       To dump the cache to disk, execute:

          # rec_control dump-cache /tmp/the-cache

       NOTE:
          Before version 4.5.0, for each command that writes to a file, pdns_recursor would  open
          the  file  to  write  to.  Starting with 4.5.0, the files are opened by the rec_control
          command itself using the credentials and the current  working  directory  of  the  user
          running  rec_control.   A single minus - can be used as a filename to write the data to
          the standard output stream.

OPTIONS

       --help provide this helpful message.

       --config-dir=<path>
              Directory where the recursor.conf lives.

       --config-name=<name>
              Name of the virtual configuration.

       --socket-dir=<path>
              Where the controlsocket will live, please use --config-dir instead.

       --socket-pid=<pid>
              When running in SMP mode, pid of pdns_recursor to control.

       --timeout=<num>
              Number of seconds to wait for the remote PowerDNS Recursor to respond.

COMMANDS

add-dont-throttle-names NAME [NAME...]
Add names for nameserver domains that may not be throttled.

add-dont-throttle-netmasks NETMASK [NETMASK...]
Add netmasks for nameservers that may not be throttled.

add-nta DOMAIN [REASON]
Add a Negative Trust Anchor for DOMAIN, suffixed optionally with REASON.

add-ta DOMAIN DSRECORD
Add a Trust Anchor for DOMAIN with DS record data DSRECORD. This adds the new Trust
Anchor to the existing set of Trust Anchors for DOMAIN.

current-queries
Shows the currently active queries.

clear-dont-throttle-names NAME [NAME...]
Remove names that are not allowed to be throttled. If NAME is '*', remove all

clear-dont-throttle-netmasks NETMASK [NETMASK...]
Remove netmasks that are not allowed to be throttled. If NETMASK is '*', remove all

clear-nta DOMAIN...
Remove Negative Trust Anchor for one or more DOMAINs. Set domain to '*' to remove
all NTA's.

clear-ta [DOMAIN]...
Remove Trust Anchor for one or more DOMAINs. Note that removing the root trust
anchor is not possible.

dump-cache FILENAME
Dumps the entire cache to FILENAME. This file should not exist already, PowerDNS
will refuse to overwrite it. While dumping, the recursor might not answer
questions.

Typical PowerDNS Recursors run multiple threads, therefore you'll see duplicate,
different entries for the same domains. The negative cache is also dumped to the
same file. The per-thread positive and negative cache dumps are separated with an
appropriate comment.

dump-edns FILENAME
Dumps the EDNS status to the filename mentioned. This file should not exist
already, PowerDNS will refuse to overwrite it. While dumping, the recursor will not
answer questions.

dump-failedservers FILENAME
Dump the contents of the failed server map to the FILENAME mentioned. This file
should not exist already, PowerDNS will refuse to overwrite it otherwise. While
dumping, the recursor will not answer questions.

dump-non-resolving FILENAME
Dump the contents of the map of nameserver names that did not resolve to an
address. This file should not exist already, PowerDNS will refuse to overwrite it
otherwise. While dumping, the recursor will not answer questions.

dump-nsspeeds FILENAME
Dumps the nameserver speed statistics to the FILENAME mentioned. This file should
not exist already, PowerDNS will refuse to overwrite it. While dumping, the
recursor will not answer questions. Statistics are kept per thread, and the dumps
end up in the same file.

dump-rpz ZONE NAME FILE NAME
Dumps the content of the RPZ zone named ZONE NAME to the FILENAME mentioned. This
file should not exist already, PowerDNS will refuse to overwrite it otherwise.
While dumping, the recursor will not answer questions.

dump-throttlemap FILENAME
Dump the contents of the throttle map to the FILENAME mentioned. This file should
not exist already, PowerDNS will refuse to overwrite it otherwise. While dumping,
the recursor will not answer questions.

get STATISTIC [STATISTIC]...
Retrieve a statistic. For items that can be queried, see ../metrics

get-all
Retrieve all known statistics.

get-dont-throttle-names
Get the list of names that are not allowed to be throttled.

get-dont-throttle-netmasks
Get the list of netmasks that are not allowed to be throttled.

get-ntas
Get a list of the currently configured Negative Trust Anchors.

get-tas
Get a list of the currently configured Trust Anchors.

get-parameter KEY [KEY]...
Retrieves the specified configuration parameter(s).

get-qtypelist
Retrieves QType statistics. Queries from cache aren't being counted yet.

hash-password [WORK-FACTOR]
Asks for a password then returns the hashed and salted version, to use as a
webserver password or API key. This command does not contact the recursor but does
the hashing inside rec_control. An optional scrypt work factor can be specified,
in power of two. The default is 1024.

help Shows a list of supported commands understood by the running pdns_recursor

ping Check if server is alive.

quit Request shutdown of the recursor, exiting the process while letting the OS clean up
resources.

quit-nicely
Request nice shutdown of the recursor. This method allows all threads to finish
their current work and releases resources before exiting. This is the preferred
method to stop the recursor.

reload-acls
Reloads ACLs.

reload-lua-script [FILENAME]
(Re)loads Lua script FILENAME. If FILENAME is empty, attempt to reload the
currently loaded script. This replaces the script currently loaded.

reload-lua-config [FILENAME]
(Re)loads Lua configuration FILENAME. If FILENAME is empty, attempt to reload the
currently loaded file. Note that FILENAME will be fully executed, any settings
changed at runtime that are not modified in this file, will still be active.
Reloading RPZ, especially by AXFR, can take some time; during which the recursor
will not answer questions.

reload-zones
Reload authoritative and forward zones. Retains current configuration in case of
errors.

set-carbon-server CARBON SERVER [CARBON OURNAME]
Set the carbon-server setting to CARBON SERVER. If CARBON OURNAME is not empty,
also set the carbon-ourname setting to CARBON OURNAME.

set-dnssec-log-bogus SETTING
Set dnssec-log-bogus setting to SETTING. Set to 'on' or 'yes' to log DNSSEC
validation failures and to 'no' or 'off' to disable logging these failures.

set-ecs-minimum-ttl NUM
Set ecs-minimum-ttl-override to NUM.

set-max-cache-entries NUM
Change the maximum number of entries in the DNS cache. If reduced, the cache size
will start shrinking to this number as part of the normal cache purging process,
which might take a while.

set-max-packetcache-entries NUM
Change the maximum number of entries in the packet cache. If reduced, the cache
size will start shrinking to this number as part of the normal cache purging
process, which might take a while.

set-minimum-ttl NUM
Set minimum-ttl-override to NUM.

set-event-trace-enabled NUM
Set logging of event trace messages, 0 = disabled, 1 = protobuf, 2 = log file, 3 =
both.

top-queries
Shows the top-20 queries. Statistics are over the last 'stats-ringbuffer-entries'
queries.

top-pub-queries
Shows the top-20 queries grouped by public suffix list. Statistics are over the
last 'stats-ringbuffer-entries' queries.

top-largeanswer-remotes
Shows the top-20 remote hosts causing large answers. Statistics are over the last
'stats-ringbuffer-entries' queries.

top-remotes
Shows the top-20 most active remote hosts. Statistics are over the last
'stats-ringbuffer-entries' queries.

top-servfail-queries
Shows the top-20 queries causing servfail responses. Statistics are over the last
'stats-ringbuffer-entries' queries.

top-bogus-queries
Shows the top-20 queries causing bogus responses. Statistics are over the last
'stats-ringbuffer-entries' queries.

top-pub-servfail-queries
Shows the top-20 queries causing servfail responses grouped by public suffix list.
Statistics are over the last 'stats-ringbuffer-entries' queries.

top-pub-bogus-queries
Shows the top-20 queries causing bogus responses grouped by public suffix list.
Statistics are over the last 'stats-ringbuffer-entries' queries.

top-servfail-remotes
Shows the top-20 most active remote hosts causing servfail responses. Statistics
are over the last 'stats-ringbuffer-entries' queries.

top-bogus-remotes
Shows the top-20 most active remote hosts causing bogus responses. Statistics are
over the last 'stats-ringbuffer-entries' queries.

top-timeouts
Shows the top-20 most active downstream timeout destinations. Statistics are over
the last 'stats-ringbuffer-entries' queries.

trace-regex REGEX
Emit resolution trace for matching queries. Empty regex to disable trace.

Queries matching this regular expression will generate voluminous tracing output.
Be aware that matches from the packet cache will still not generate tracing. To
unset the regex, pass trace-regex without a new regex.

The regular expression is matched against domain queries terminated with a dot. For
example the regex 'powerdns.com$' will not match a query for 'www.powerdns.com',
since the attempted match will be with 'www.powerdns.com.'.

In addition, since this is a regular expression, to exclusively match queries for
'www.powerdns.com', one should escape the dots: '^www\.powerdns\.com\.$'. Note
that the single quotes prevent further interpretation of the backslashes by the
shell.

Multiple matches can be chained with the | operator. For example, to match all
queries for Dutch (.nl) and German (.de) domain names, use: '\.nl\.$|\.de\.$'.

unload-lua-script
Unloads Lua script if one was loaded.

version
Report running version.

wipe-cache DOMAIN [DOMAIN] [...]
Wipe entries for DOMAIN (exact name match) from the cache. This is useful if, for
example, an important server has a new IP address, but the TTL has not yet expired.
Multiple domain names can be passed. DOMAIN can be suffixed with a '$'. to delete
the whole tree from the cache. i.e. 'powerdns.com$' will remove all cached entries
under and including the powerdns.com name.

Note: this command also wipes the negative cache.

Warning: Don't just wipe "www.somedomain.com", its NS records or CNAME target may
still be undesired, so wipe "somedomain.com" as well.

wipe-cache-typed qtype DOMAIN [DOMAIN] [...]
Same as wipe-cache, but only wipe records of type qtype.

AUTHOR

       PowerDNS.COM BV

COPYRIGHT

       2001-2021, PowerDNS.COM BV

                                           Dec 15, 2021                            REC_CONTROL(1)