Provided by: testssl.sh_3.0.7+dfsg-1_all 
NAME
testssl
NAME
testssl.sh -- check encryption of SSL/TLS servers
SYNOPSIS
testssl.sh [OPTIONS] <URI>, testssl.sh [OPTIONS] --file <FILE>
or
testssl.sh [BANNER OPTIONS]
DESCRIPTION
testssl.sh is a free command line tool which checks a server´s service on any port for the
support of TLS/SSL ciphers, protocols as well as cryptographic flaws and much more.
The output rates findings by color (screen) or severity (file output) so that you are able
to tell whether something is good or bad. The (screen) output has several sections in
which classes of checks are being performed. To ease readability on the screen it aligns
and indents the output properly.
Only you see the result. You also can use it internally on your LAN. Except DNS lookups or
unless you instruct testssl.sh to check for revocation of certificates it doesn´t use any
other hosts or even third parties for any test.
REQUIREMENTS
Testssl.sh is out of the box portable: it runs under any Unix-like stack: Linux, *BSD,
MacOS X, WSL=Windows Subsystem for Linux, Cygwin and MSYS2. bash is a prerequisite, also
version 3 is still supported. Standard utilities like awk, sed, tr and head are also
needed. This can be of a BSD, System 5 or GNU flavor whereas grep from System V is not yet
supported.
Any OpenSSL or LibreSSL version is needed as a helper. Unlike previous versions of
testssl.sh almost every check is done via (TCP) sockets. In addition statically linked
OpenSSL binaries for major operating systems are supplied in ./bin/.
GENERAL
testssl.sh URI as the default invocation does the so-called default run which does a
number of checks and puts out the results colorized (ANSI and termcap) on the screen. It
does every check listed below except -E which are (order of appearance):
0) displays a banner (see below), does a DNS lookup also for further IP addresses and does
for the returned IP address a reverse lookup. Last but not least a service check is being
done.
1) SSL/TLS protocol check
2) standard cipher categories to give you upfront an idea for the ciphers supported
3) checks (perfect) forward secrecy: ciphers and elliptical curves
4) server preferences (server order)
5) server defaults (certificate info, TLS extensions, session information)
6) HTTP header (if HTTP detected or being forced via --assume-http)
7) vulnerabilities
8) testing each of 370 preconfigured ciphers
9) client simulation
OPTIONS AND PARAMETERS
Options are either short or long options. Any long or short option requiring a value can
be called with or without an equal sign. E.g. testssl.sh -t=smtp --wide
--openssl=/usr/bin/openssl <URI> (short options with equal sign) is equivalent to
testssl.sh --starttls smtp --wide --openssl /usr/bin/openssl <URI> (long option without
equal sign). Some command line options can also be preset via ENV variables. WIDE=true
OPENSSL=/usr/bin/openssl testssl.sh --starttls=smtp <URI> would be the equivalent to the
aforementioned examples. Preference has the command line over any environment variables.
<URI> or --file <FILE> always needs to be the last parameter.
BANNER OPTIONS
--help (or no arg) display command line help
-b, --banner displays testssl.sh banner, including license, usage conditions, version of
testssl.sh, detected openssl version, its path to it, # of ciphers of openssl, its build
date and the architecture.
-v, --version same as before
-V [pattern] , --local [pattern] pretty print all local ciphers supported by openssl
version. If a pattern is supplied it performs a match (ignore case) on any of the strings
supplied in the wide output, see below. The pattern will be searched in the any of the
columns: hexcode, cipher suite name (OpenSSL or IANA), key exchange, encryption, bits. It
does a word pattern match for non-numbers, for number just a normal match applies. Numbers
here are defined as [0-9,A-F]. This means (attention: catch) that the pattern CBC is
matched as non-word, but AES as word.
INPUT PARAMETERS
URI can be a hostname, an IPv4 or IPv6 address (restriction see below) or an URL. IPv6
addresses need to be in square brackets. For any given parameter port 443 is assumed
unless specified by appending a colon and a port number. The only preceding protocol
specifier allowed is https. You need to be aware that checks for an IP address might not
hit the vhost you want. DNS resolution (A/AAAA record) is being performed unless you have
an /etc/hosts entry for the hostname.
--file <fname> or the equivalent -iL <fname> are mass testing options. Per default it
implicitly turns on --warnings batch. In its first incarnation the mass testing option
reads command lines from fname. fname consists of command lines of testssl, one line per
instance. Comments after # are ignored, EOF signals the end of fname any subsequent lines
will be ignored too. You can also supply additional options which will be inherited to
each child, e.g. When invoking testssl.sh --wide --log --file <fname> . Each single line
in fname is parsed upon execution. If there´s a conflicting option and serial mass testing
option is being performed the check will be aborted at the time it occurs and depending on
the output option potentially leaving you with an output file without footer. In parallel
mode the mileage varies, likely a line won´t be scanned.
Alternatively fname can be in nmap´s grep(p)able output format (-oG). Only open ports will
be considered. Multiple ports per line are allowed. The ports can be different and will be
tested by testssl.sh according to common practice in the internet, i.e. if nmap shows in
its output an open port 25, automatically -t smtp will be added before the URI whereas
port 465 will be treated as a plain TLS/SSL port, not requiring an STARTTLS SMTP handshake
upfront. This is done by an internal table which correlates nmap´s open port detected to
the STARTTLS/plain text decision from testssl.sh.
Nmap´s output always returns IP addresses and only if there´s a PTR DNS record available a
hostname. As it is not checked by nmap whether the hostname matches the IP (A or AAAA
record), testssl.sh does this automatically for you. If the A record of the hostname
matches the IP address, the hostname is used and not the IP address. Please keep in mind
that checks against an IP address might not hit the vhost you maybe were aiming at and
thus it may lead to different results.
A typical internal conversion to testssl.sh file format from nmap´s grep(p)able format
could look like:
10.10.12.16:443
10.10.12.16:1443
-t smtp host.example.com:25
host.example.com:443
host.example.com:631
-t ftp 10.10.12.11:21
10.10.12.11:8443
Please note that fname has to be in Unix format. DOS carriage returns won´t be accepted.
Instead of the command line switch the environment variable FNAME will be honored too.
--mode <serial|parallel>. Mass testing to be done serial (default) or parallel (--parallel
is shortcut for the latter, --serial is the opposite option). Per default mass testing is
being run in serial mode, i.e. one line after the other is processed and invoked. The
variable MASS_TESTING_MODE can be defined to be either equal serial or parallel.
--warnings <batch|off>. The warnings parameter determines how testssl.sh will deal with
situations where user input normally will be necessary. There are two options. batch
doesn´t wait for a confirming keypress when a client- or server-side problem is
encountered. As of 3.0 it just then terminates the particular scan. This is automatically
chosen for mass testing (--file). off just skips the warning, the confirmation but
continues the scan, independent whether it makes sense or not. Please note that there are
conflicts where testssl.sh will still ask for confirmation which are the ones which
otherwise would have a drastic impact on the results. Almost any other decision will be
made in the future as a best guess by testssl.sh. The same can be achieved by setting the
environment variable WARNINGS.
--connect-timeout <seconds> This is useful for socket TCP connections to a node. If the
node does not complete a TCP handshake (e.g. because it is down or behind a firewall or
there´s an IDS or a tarpit) testssl.sh may usually hang for around 2 minutes or even much
more. This parameter instructs testssl.sh to wait at most seconds for the handshake to
complete before giving up. This option only works if your OS has a timeout binary
installed. CONNECT_TIMEOUT is the corresponding environment variable.
--openssl-timeout <seconds> This is especially useful for all connects using openssl and
practically useful for mass testing. It avoids the openssl connect to hang for ~2 minutes.
The expected parameter seconds instructs testssl.sh to wait before the openssl connect
will be terminated. The option is only available if your OS has a timeout binary
installed. As there are different implementations of timeout: It automatically calls the
binary with the right parameters. OPENSSL_TIMEOUT is the equivalent environment variable.
--basicauth <user:pass> This can be set to provide HTTP basic auth credentials which are
used during checks for security headers. BASICAUTH is the ENV variable you can use
instead.
SPECIAL INVOCATIONS
-t <protocol>, --starttls <protocol> does a default run against a STARTTLS enabled
protocol. protocol must be one of ftp, smtp, pop3, imap, xmpp, telnet, ldap, irc, lmtp,
nntp, postgres, mysql. For the latter four you need e.g. the supplied OpenSSL or OpenSSL
version 1.1.1. Please note: MongoDB doesn´t offer a STARTTLS connection, LDAP currently
only works with --ssl-native. telnet and irc is WIP.
--xmpphost <jabber_domain> is an additional option for STARTTLS enabled XMPP: It expects
the jabber domain as a parameter. This is only needed if the domain is different from the
URI supplied.
--mx <domain|host> tests all MX records (STARTTLS on port 25) from high to low priority,
one after the other.
--ip <ip> tests either the supplied IPv4 or IPv6 address instead of resolving host(s) in
<URI>. IPv6 addresses need to be supplied in square brackets. --ip=one means: just test
the first A record DNS returns (useful for multiple IPs). If -6 and --ip=one was supplied
an AAAA record will be picked if available. The --ip option might be also useful if you
want to resolve the supplied hostname to a different IP, similar as if you would edit
/etc/hosts or /c/Windows/System32/drivers/etc/hosts. --ip=proxy tries a DNS resolution via
proxy.
--proxy <host>:<port> does ANY check via the specified proxy. --proxy=auto inherits the
proxy setting from the environment. The hostname supplied will be resolved to the first A
record. In addition if you want lookups via proxy you can specify DNS_VIA_PROXY=true. OCSP
revocation checking (-S --phone-out) is not supported by OpenSSL via proxy. As supplying a
proxy is an indicator for port 80 and 443 outgoing being blocked in your network an OCSP
revocation check won´t be performed. However if IGN_OCSP_PROXY=true has been supplied it
will be tried directly. Authentication to the proxy is not supported. Proxying via IPv6
addresses is not possible, no HTTPS or SOCKS proxy is supported.
-6 does (also) IPv6 checks. Please note that testssl.sh doesn´t perform checks on an IPv6
address automatically, because of two reasons: testssl.sh does no connectivity checks for
IPv6 and it cannot determine reliably whether the OpenSSL binary you´re using has IPv6
s_client support. -6 assumes both is the case. If both conditions are met and you in
general prefer to test for IPv6 branches as well you can add HAS_IPv6 to your shell
environment. Besides the OpenSSL binary supplied IPv6 is known to work with vanilla
OpenSSL >= 1.1.0 and older versions >=1.0.2 in RHEL/CentOS/FC and Gentoo.
--ssl-native Instead of using a mixture of bash sockets and a few openssl s_client
connects, testssl.sh uses the latter (almost) only. This is faster at the moment but
provides less accurate results, especially for the client simulation and for cipher
support. For all checks you will see a warning if testssl.sh cannot tell if a particular
check cannot be performed. For some checks however you might end up getting false
negatives without a warning. This option is only recommended if you prefer speed over
accuracy or you know that your target has sufficient overlap with the protocols and cipher
provided by your openssl binary.
--openssl <path_to_openssl> testssl.sh tries very hard to find automagically the binary
supplied (where the tree of testssl.sh resides, from the directory where testssl.sh has
been started from, etc.). If all that doesn´t work it falls back to openssl supplied from
the OS ($PATH). With this option you can point testssl.sh to your binary of choice and
override any internal magic to find the openssl binary. (Environment preset via
OPENSSL=<path_to_openssl>).
TUNING OPTIONS
--bugs does some workarounds for buggy servers like padding for old F5 devices. The option
is passed as -bug to openssl when needed, see s_client(1), environment preset via
BUGS="-bugs" (1x dash). For the socket part testssl.sh has always workarounds in place to
cope with broken server implementations.
--assuming-http testssl.sh normally does upfront an application protocol detection. In
cases where HTTP cannot be automatically detected you may want to use this option. It
enforces testssl.sh not to skip HTTP specific tests (HTTP header) and to run a browser
based client simulation. Please note that sometimes also the severity depends on the
application protocol, e.g. SHA1 signed certificates, the lack of any SAN matches and some
vulnerabilities will be punished harder when checking a web server as opposed to a mail
server.
-n, --nodns <min|none> tells testssl.sh which DNS lookups should be performed. min uses
only forward DNS resolution (A and AAAA record or MX record) and skips CAA lookups and PTR
records from the IP address back to a DNS name. none performs no DNS lookups at all. For
the latter you either have to supply the IP address as a target, to use --ip or have the
IP address in /etc/hosts. The use of the switch is only useful if you either can´t or are
not willing to perform DNS lookups. The latter can apply e.g. to some pentests. In general
this option could e.g. help you to avoid timeouts by DNS lookups. NODNS is the environment
variable for this.
--sneaky For HTTP header checks testssl.sh uses normally the server friendly HTTP user
agent TLS tester from ${URL}. With this option your traces are less verbose and a Firefox
user agent is being used. Be aware that it doesn´t hide your activities. That is just not
possible (environment preset via SNEAKY=true).
--ids-friendly is a switch which may help to get a scan finished which otherwise would be
blocked by a server side IDS. This switch skips tests for the following vulnerabilities:
Heartbleed, CCS Injection, Ticketbleed and ROBOT. The environment variable OFFENSIVE set
to false will achieve the same result. Please be advised that as an alternative or as a
general approach you can try to apply evasion techniques by changing the variables
USLEEP_SND and / or USLEEP_REC and maybe MAX_WAITSOCK.
--phone-out Checking for revoked certificates via CRL and OCSP is not done per default.
This switch instructs testssl.sh to query external -- in a sense of the current run --
URIs. By using this switch you acknowledge that the check might have privacy issues, a
download of several megabytes (CRL file) may happen and there may be network connectivity
problems while contacting the endpoint which testssl.sh doesn´t handle. PHONE_OUT is the
environment variable for this which needs to be set to true if you want this.
--add-ca <cafile> enables you to add your own CA(s) for trust chain checks. cafile can be
a single path or multiple paths as a comma separated list of root CA files. Internally
they will be added during runtime to all CA stores. This is (only) useful for internal
hosts whose certificates is issued by internal CAs. Alternatively ADDITIONAL_CA_FILES is
the environment variable for this.
SINGLE CHECK OPTIONS
Any single check switch supplied as an argument prevents testssl.sh from doing a default
run. It just takes this and if supplied other options and runs them - in the order they
would also appear in the default run.
-e, --each-cipher checks each of the (currently configured) 370 ciphers via openssl +
sockets remotely on the server and reports back the result in wide mode. If you want to
display each cipher tested you need to add --show-each. Per default it lists the following
parameters: hexcode, OpenSSL cipher suite name, key exchange, encryption bits, IANA/RFC
cipher suite name. Please note the --mapping parameter changes what cipher suite names you
will see here and at which position. Also please note that the bit length for the
encryption is shown and not the security length, albeit it´ll be sorted by the latter. For
3DES due to the Meet-in-the-Middle problem the bit size of 168 bits is equivalent to the
security size of 112 bits.
-E, --cipher-per-proto is similar to -e, --each-cipher. It checks each of the possible
ciphers, here: per protocol. If you want to display each cipher tested you need to add
--show-each. The output is sorted by security strength, it lists the encryption bits
though.
-s, --std, --standard tests certain lists of cipher suites / cipher categories by
strength. Those lists are (openssl ciphers $LIST, $LIST from below:)
• NULL encryption ciphers: ´NULL:eNULL´
• Anonymous NULL ciphers: ´aNULL:ADH´
• Export ciphers (w/o the preceding ones): ´EXPORT:!ADH:!NULL´
• LOW (64 Bit + DES ciphers, without EXPORT ciphers):
´LOW:DES:RC2:RC4:!ADH:!EXP:!NULL:!eNULL´
• 3DES + IDEA Ciphers: ´3DES:IDEA:!aNULL:!ADH´
• Average grade Ciphers:
´HIGH:MEDIUM:AES:CAMELLIA:ARIA:!IDEA:!CHACHA20:!3DES:!RC2:!RC4:!AESCCM8:!AESCCM:!AESGCM:!ARIAGCM:!aNULL´
• Strong grade Ciphers (AEAD): ´AESGCM:CHACHA20:CamelliaGCM:AESCCM´
-f, --pfs, --fs,--nsa Checks robust (perfect) forward secrecy key exchange. "Robust" means
that ciphers having intrinsic severe weaknesses like Null Authentication or Encryption,
3DES and RC4 won´t be considered here. There shouldn´t be the wrong impression that a
secure key exchange has been taking place and everything is fine when in reality the
encryption sucks. Also this section lists the available elliptical curves and Diffie
Hellman groups, as well as FFDHE groups (TLS 1.2 and TLS 1.3).
-p, --protocols checks TLS/SSL protocols SSLv2, SSLv3, TLS 1.0 through TLS 1.3 and for
HTTP: SPDY (NPN) and ALPN, a.k.a. HTTP/2. For TLS 1.3 several drafts (from 18 on) and
final are supported and being tested for.
-P, --preference displays the servers preferences: cipher order, with used openssl client:
negotiated protocol and cipher. If there´s a cipher order enforced by the server it
displays it for each protocol (openssl+sockets). If there´s not, it displays instead which
ciphers from the server were picked with each protocol.
-S, --server_defaults displays information from the server hello(s):
• Available TLS extensions,
• TLS ticket + session ID information/capabilities,
• session resumption capabilities,
• Time skew relative to localhost (most server implementations return random values).
• Several certificate information
• signature algorithm,
• key size,
• key usage and extended key usage,
• fingerprints and serial
• Common Name (CN), Subject Alternative Name (SAN), Issuer,
• Trust via hostname + chain of trust against supplied certificates
• EV certificate detection
• experimental "eTLS" detection
• validity: start + end time, how many days to go (warning for certificate lifetime
>=5 years)
• revocation info (CRL, OCSP, OCSP stapling + must staple). When --phone-out
supplied it checks against the certificate issuer whether the host certificate has
been revoked (plain OCSP, CRL).
• displaying DNS Certification Authority Authorization resource record
• Certificate Transparency info (if provided by server).
For the trust chain check 5 certificate stores are provided. If the test against one of
the trust stores failed, the one is being identified and the reason for the failure is
displayed - in addition the ones which succeeded are displayed too. You can configure your
own CA via ADDITIONAL_CA_FILES, see section FILES below. If the server provides no
matching record in Subject Alternative Name (SAN) but in Common Name (CN), it will be
indicated as this is deprecated. Also for multiple server certificates are being checked
for as well as for the certificate reply to a non-SNI (Server Name Indication) client
hello to the IP address. Regarding the TLS clock skew: it displays the time difference to
the client. Only a few TLS stacks nowadays still support this and return the local clock
gmt_unix_time, e.g. IIS, openssl < 1.0.1f. In addition to the HTTP date you could e.g.
derive that there are different hosts where your TLS and your HTTP request ended -- if the
time deltas differ significantly.
-x <pattern>, --single-cipher <pattern> tests matched pattern of ciphers against a server.
Patterns are similar to -V pattern , --local pattern, see above about matching.
-h, --header, --headers if the service is HTTP (either by detection or by enforcing via
--assume-http. It tests several HTTP headers like
• HTTP Strict Transport Security (HSTS)
• HTTP Public Key Pinning (HPKP)
• Server banner
• HTTP date+time
• Server banner like Linux or other Unix vendor headers
• Application banner (PHP, RoR, OWA, SharePoint, Wordpress, etc)
• Reverse proxy headers
• Web server modules
• IPv4 address in header
• Cookie (including Secure/HTTPOnly flags)
• Decodes BIG IP F5 non-encrypted cookies
• Security headers (X-Frame-Options, X-XSS-Protection, Expect-CT,... , CSP headers).
Nonsense is not yet detected here.
-c, --client-simulation This simulates a handshake with a number of standard clients so
that you can figure out which client cannot or can connect to your site. For the latter
case the protocol, cipher and curve is displayed, also if there´s Forward Secrecy.
testssl.sh uses a handselected set of clients which are retrieved by the SSLlabs API. The
output is aligned in columns when combined with the --wide option. If you want the full
nine yards of clients displayed use the environment variable ALL_CLIENTS.
-g, --grease checks several server implementation bugs like tolerance to size limitations
and GREASE, see https://www.ietf.org/archive/id/draft-ietf-tls-grease-01.txt . This checks
doesn´t run per default.
VULNERABILITIES
-U, --vulnerable, --vulnerabilities Just tests all (of the following) vulnerabilities. The
environment variable VULN_THRESHLD determines after which value a separate headline for
each vulnerability is being displayed. Default is 1 which means if you check for two
vulnerabilities, only the general headline for vulnerabilities section is displayed -- in
addition to the vulnerability and the result. Otherwise each vulnerability or
vulnerability section gets its own headline in addition to the output of the name of the
vulnerability and test result. A vulnerability section is comprised of more than one
check, e.g. the renegotiation vulnerability check has two checks, so has Logjam.
-H, --heartbleed Checks for Heartbleed, a memory leakage in openssl. Unless the server
side doesn´t support the heartbeat extension it is likely that this check runs into a
timeout. The seconds to wait for a reply can be adjusted with HEARTBLEED_MAX_WAITSOCK. 8
is the default.
-I, --ccs, --ccs-injection Checks for CCS Injection which is an openssl vulnerability.
Sometimes also here the check needs to wait for a reply. The predefined timeout of 5
seconds can be changed with the environment variable CCS_MAX_WAITSOCK.
-T, --ticketbleed Checks for Ticketbleed memory leakage in BigIP loadbalancers.
-BB, --robot Checks for vulnerability to ROBOT / (Return Of Bleichenbacher´s Oracle
Threat) attack.
-R, --renegotiation Tests renegotiation vulnerabilities. Currently there´s a check for
Secure Renegotiation and for Secure Client-Initiated Renegotiation. Please be aware that
vulnerable servers to the latter can likely be DoSed very easily (HTTP). A check for
Insecure Client-Initiated Renegotiation is not yet implemented.
-C, --compression, --crime Checks for CRIME (Compression Ratio Info-leak Made Easy)
vulnerability in TLS. CRIME in SPDY is not yet being checked for.
-B, --breach Checks for BREACH (Browser Reconnaissance and Exfiltration via Adaptive
Compression of Hypertext) vulnerability. As for this vulnerability HTTP level compression
is a prerequisite it´ll be not tested if HTTP cannot be detected or the detection is not
enforced via `--assume-http. Please note that only the URL supplied (normally "/" ) is
being tested.
-O, --poodle Tests for SSL POODLE (Padding Oracle On Downgraded Legacy Encryption)
vulnerability. It basically checks for the existence of CBC ciphers in SSLv3.
-Z, --tls-fallback Checks TLS_FALLBACK_SCSV mitigation. TLS_FALLBACK_SCSV is basically a
ciphersuite appended to the Client Hello trying to prevent protocol downgrade attacks by a
Man in the Middle.
-W, --sweet32 Checks for vulnerability to SWEET32 by testing 64 bit block ciphers (3DES,
RC2 and IDEA).
-F, --freak Checks for FREAK vulnerability (Factoring RSA Export Keys) by testing for
EXPORT RSA ciphers
-D, --drown Checks for DROWN vulnerability (Decrypting RSA with Obsolete and Weakened
eNcryption) by checking whether the SSL 2 protocol is available at the target. Please note
that if you use the same RSA certificate elsewhere you might be vulnerable too. testssl.sh
doesn´t check for this but provides a helpful link @ censys.io which provides this
service.
-J, --logjam Checks for LOGJAM vulnerability by checking for DH EXPORT ciphers. It also
checks for "common primes" which are preconfigured DH keys. DH keys =< 1024 Bit will be
penalized. Also FFDHE groups (TLS 1.2) will be displayed here.
-A, --beast Checks BEAST vulnerabilities in SSL 3 and TLS 1.0 by testing the usage of CBC
ciphers.
-L, --lucky13 Checks for LUCKY13 vulnerability. It checks for the presence of CBC ciphers
in TLS versions 1.0 - 1.2.
-4, --rc4, --appelbaum Checks which RC4 stream ciphers are being offered.
OUTPUT OPTIONS
-q, --quiet Normally testssl.sh displays a banner on stdout with several version
information, usage rights and a warning. This option suppresses it. Please note that by
choosing this option you acknowledge usage terms and the warning normally appearing in the
banner.
--wide Except the "each cipher output" all tests displays the single cipher name (scheme
see below). This option enables testssl.sh to display also for the following sections the
same output as for testing each ciphers: BEAST, PFS, RC4. The client simulation has also a
wide mode. The difference here is restricted to a column aligned output and a proper
headline. The environment variable WIDE can be used instead.
--mapping <openssl|iana|no-openssl|no-iana>
• openssl: use the OpenSSL cipher suite name as the primary name cipher suite name form
(default),
• iana: use the IANA cipher suite name as the primary name cipher suite name form.
• no-openssl: don´t display the OpenSSL cipher suite name, display IANA names only.
• no-iana: don´t display the IANA cipher suite name, display OpenSSL names only.
Please note that in testssl.sh 3,0 you can still use rfc instead of iana and no-rfc
instead of no-iana but it´ll disappear after 3.0.
--show-each This is an option for all wide modes only: it displays all ciphers tested --
not only succeeded ones. SHOW_EACH_C is your friend if you prefer to set this via the
shell environment.
--color <0|1|2|3> determines the use of colors on the screen and in the log file: 2 is the
default and makes use of ANSI and termcap escape codes on your terminal. 1 just uses
non-colored mark-up like bold, italics, underline, reverse. 0 means no mark-up at all = no
escape codes. This is also what you want when you want a log file without any escape
codes. 3 will color ciphers and EC according to an internal (not yet perfect) rating.
Setting the environment variable COLOR to the value achieves the same result. Please not
that OpenBSD and early FreeBSD do not support italics.
--colorblind Swaps green and blue colors in the output, so that this percentage of folks
(up to 8% of males, see https://en.wikipedia.org/wiki/Color_blindness) can distinguish
those findings better. COLORBLIND is the according variable if you want to set this in the
environment.
--debug <0-6> This gives you additional output on the screen (2-6), only useful for
debugging. DEBUG is the according environment variable which you can use. There are six
levels (0 is the default, thus it has no effect):
1. screen output normal but leaves useful debug output in /tmp/testssl.XXXXXX/ . The info
about the exact directory is included in the screen output in the end of the run.
2. lists more what´s going on, status (high level) and connection errors, a few general
debug output
3. even slightly more info: hexdumps + other info
4. display bytes sent via sockets
5. display bytes received via sockets
6. whole 9 yards
FILE OUTPUT OPTIONS
--log, --logging Logs stdout also to ${NODE}-p${port}${YYYYMMDD-HHMM}.log in current
working directory of the shell. Depending on the color output option (see above) the
output file will contain color and other markup escape codes, unless you specify --color 0
too. cat and -- if properly configured less -- will show the output properly formatted on
your terminal. The output shows a banner with the almost the same information as on the
screen. In addition it shows the command line of the testssl.sh instance. Please note that
the resulting log file is formatted according to the width of your screen while running
testssl.sh. You can override the width with the environment variable TERM_WIDTH.
--logfile <logfile> or -oL <logfile> Instead of the previous option you may want to use
this one if you want to log into a directory or if you rather want to specify the log file
name yourself. If logfile is a directory the output will put into
logfile/${NODE}-p${port}${YYYYMMDD-HHMM}.log. If logfile is a file it will use that file
name, an absolute path is also permitted here. LOGFILE is the variable you need to set if
you prefer to work environment variables instead. Please note that the resulting log file
is formatted according to the width of your screen while running testssl.sh. You can
override the width with the environment variable TERM_WIDTH.
--json Logs additionally to JSON file ${NODE}-p${port}${YYYYMMDD-HHMM}.json in the current
working directory of the shell. The resulting JSON file is opposed to --json-pretty flat
-- which means each section is self contained and has an identifier for each single check,
the hostname/IP address, the port, severity and the finding. For vulnerabilities it may
contain a CVE and CWE entry too. The output doesn´t contain a banner or a footer.
--jsonfile <jsonfile> or -oj <jsonfile> Instead of the previous option you may want to use
this one if you want to log the JSON out put into a directory or if you rather want to
specify the log file name yourself. If jsonfile is a directory the output will put into
logfile/${NODE}-p${port}${YYYYMMDD-HHMM}.json. Ifjsonfile` is a file it will use that file
name, an absolute path is also permitted here.
--json-pretty Logs additionally to JSON file ${NODE}-p${port}${YYYYMMDD-HHMM}.json in the
current working directory of the shell. The resulting JSON file is opposed to--json`
non-flat -- which means it is structured. The structure contains a header similar to the
banner on the screen, including the command line, scan host, openssl binary used, testssl
version and epoch of the start time. Then for every test section of testssl.sh it contains
a separate JSON object/section. Each finding has a key/value pair identifier with the
identifier for each single check, the severity and the finding. For vulnerabilities it may
contain a CVE and CWE entry too. The footer lists the scan time in seconds.
--jsonfile-pretty <jsonfile> or -oJ <jsonfile> Similar to the aforementioned --jsonfile or
--logfile it logs the output in pretty JSON format (see --json-pretty) into a file or a
directory. For further explanation see --jsonfile or --logfile.
--csv Logs additionally to a CSV file ${NODE}-p${port}${YYYYMMDD-HHMM}.csv in the current
working directory of the shell. The output contains a header with the keys, the values are
the same as in the flat JSON format (identifier for each single check, the hostname/IP
address, the port, severity, the finding and for vulnerabilities a CVE and CWE number).
--csvfile <csvfile> or -oC <csvfile> Similar to the aforementioned --jsonfile or --logfile
it logs the output in CSV format (see --cvs) additionally into a file or a directory. For
further explanation see --jsonfile or --logfile.
--html Logs additionally to an HTML file ${NODE}-p${port}${YYYYMMDD-HHMM}.html in the
current working directory of the shell. It contains a 1:1 output of the console. In former
versions there was a non-native option to use "aha" (Ansi HTML Adapter:
github.com/theZiz/aha) like testssl.sh [options] <URI> | aha >output.html. This is not
necessary anymore.
--htmlfile <htmlfile> or -oH <htmlfile> Similar to the aforementioned --jsonfile or
--logfile it logs the output in HTML format (see --html) additionally into a file or a
directory. For further explanation see --jsonfile or --logfile.
-oA <filename> / --outFile <filename> Similar to nmap it does a file output to all
available file formats: LOG, JSON pretty, CSV, HTML. If the filename supplied is equal
auto the filename is automatically generated using
´${NODE}-p${port}${YYYYMMDD-HHMM}.${EXT}´ with the according extension. If a directory is
provided all output files will put into
<filename>/${NODE}-p${port}${YYYYMMDD-HHMM}.{log,json,csv,html}.
-oa <filename> / --outfile <filename> Does the same as the previous option but uses flat
JSON instead.
--hints This option is not in use yet. This option is meant to give hints how to fix a
finding or at least a help to improve something. GIVE_HINTS is the environment variable
for this.
--severity <severity> For CSV and both JSON outputs this will only add findings to the
output file if a severity is equal or higher than the severity value specified. Allowed
are <LOW|MEDIUM|HIGH|CRITICAL>. WARN is another level which translates to a client-side
scanning error or problem. Thus you will always see them in a file if they occur.
--append Normally, if an output file already exists and it has a file size greater zero,
testssl.sh will prompt you to manually remove the file exit with an error. --append
however will append to this file, without a header. The environment variable APPEND does
the same. Be careful using this switch/variable. A complementary option which overwrites
an existing file doesn´t exist per design.
--outprefix <fname_prefix> Prepend output filename prefix fname_prefix before ´${NODE}-´.
You can use as well the environment variable FNAME_PREFIX. Using this any output files
will be named <fname_prefix>-${NODE}-p${port}${YYYYMMDD-HHMM}.<format> when no file name
of the respective output option was specified. If you do not like the separator ´-´ you
can as well supply a <fname_prefix> ending in ´.´, ´_´ or ´,´. In this case or if you
already supplied ´-´ no additional ´-´ will be appended to <fname_prefix>.
A few file output options can also be preset via environment variables.
COLOR RATINGS
Testssl.sh makes use of (the eight) standard terminal colors. The color scheme is as
follows:
• light red: a critical finding
• red: a high finding
• brown: a medium finding
• yellow: a low finding
• green (blue if COLORBLIND is set): something which is either in general a good thing
or a negative result of a check which otherwise results in a high finding
• light green (light blue if COLORBLIND is set) : something which is either in general a
very good thing or a negative result of a check which otherwise results in a critical
finding
• no color at places where also a finding can be expected: a finding on an info level
• cyan: currently only used for --show-each or an additional hint
• magenta: signals a warning condition, e.g. either a local lack of capabilities on the
client side or another problem
• light magenta: a fatal error which either requires strict consent from the user to
continue or a condition which leaves no other choice for testssl.sh to quit
What is labeled as "light" above appears as such on the screen but is technically speaking
"bold". Besides --color=3 will color ciphers according to an internal and rough rating.
Markup (without any color) is used in the following manner:
• bold: for the name of the test
• underline + bold: for the headline of each test section
• underline: for a sub-headline
• italics: for strings just reflecting a value read from the server
TUNING via ENV variables and more options
Except the environment variables mentioned above which can replace command line options
here a some which cannot be set otherwise. Variables used for tuning are preset with
reasonable values. There should be no reason to change them unless you use testssl.sh
under special conditions.
• TERM_WIDTH is a variable which overrides the auto-determined terminal width size.
Setting this variable normally only makes sense if you log the output to a file using
the --log, --logfile or -oL option.
• DEBUG_ALLINONE / SETX: when setting one of those to true testssl.sh falls back to the
standard bash behavior, i.e. calling bash -x testssl.sh it displays the bash debugging
output not in an external file /tmp/testssl-<XX>.log
• DEBUGTIME: Profiling option. When using bash´s debug mode and when this is set to
true, it generates a separate text file with epoch times in /tmp/testssl-<XX>.time.
They need to be concatenated by paste /tmp/testssl-<XX>.{time,log}
• EXPERIMENTAL=true is an option which is sometimes used in the development process to
make testing easier. In released versions this has no effect.
• ALL_CLIENTS=true runs a client simulation with all (currently 126) clients when
testing HTTP.
• UNBRACKTD_IPV6: needs to be set to true for some old versions of OpenSSL (like from
Gentoo) which don´t support [bracketed] IPv6 addresses
• NO_ENGINE: if you have problems with garbled output containing the word ´engine´ you
might want to set this to true. It forces testssl.sh not try to configure openssl´s
engine or a non existing one from libressl
• HEADER_MAXSLEEP: To wait how long before killing the process to retrieve a service
banner / HTTP header
• MAX_WAITSOCK: It instructs testssl.sh to wait until the specified time before
declaring a socket connection dead. Don´t change this unless you´re absolutely sure
what you´re doing. Value is in seconds.
• CCS_MAX_WAITSOCK Is the similar to above but applies only to the CCS handshakes, for
both of the two the two CCS payload. Don´t change this unless you´re absolutely sure
what you´re doing. Value is in seconds.
• HEARTBLEED_MAX_WAITSOCK Is the similar to MAX_WAITSOCK but applies only to the
ServerHello after sending the Heartbleed payload. Don´t change this unless you´re
absolutely sure what you´re doing. Value is in seconds.
• MEASURE_TIME_FILE For seldom cases when you don´t want the scan time to be included in
the output you can set this to false.
• STARTTLS_SLEEP is per default set to 10 (seconds). That´s the value testssl.sh waits
for a string in the STARTTLS handshake before giving up.
• MAX_PARALLEL is the maximum number of tests to run in parallel in parallel mass
testing mode. The default value of 20 may be made larger on systems with faster
processors.
• MAX_WAIT_TEST is the maximum time (in seconds) to wait for a single test in parallel
mass testing mode to complete. The default is 1200.
• HSTS_MIN is preset to 179 (days). If you want warnings sooner or later for HTTP Strict
Transport Security you can change this.
• HPKP_MIN is preset to 30 (days). If you want warnings sooner or later for HTTP Public
Key Pinning you can change this
• DAYS2WARN1 is the first threshold when you´ll be warning of a certificate expiration
of a host, preset to 60 (days). For Let´s Encrypt this value will be divided
internally by 2.
• DAYS2WARN2 is the second threshold when you´ll be warning of a certificate expiration
of a host, preset to 30 (days). For Let´s Encrypt this value will be divided
internally by 2.
• TESTSSL_INSTALL_DIR is the derived installation directory of testssl.sh. Relatively to
that the bin and mandatory etc directory will be looked for.
• CA_BUNDLES_PATH: If you have an own set of CA bundles or you want to point testssl.sh
to a specific location of a CA bundle, you can use this variable to set the directory
which testssl.sh will use. Please note that it overrides completely the builtin path
of testssl.sh which means that you will only test against the bundles you point to.
Also you might want to use ~/utils/create_ca_hashes.sh to create the hashes for HPKP.
• MAX_SOCKET_FAIL: A number which tells testssl.sh how often a TCP socket connection may
fail before the program gives up and terminates. The default is 2. You can increase it
to a higher value if you frequently see a message like Fatal error: repeated openssl
s_client connect problem, doesn´t make sense to continue.
• MAX_OSSL_FAIL: A number which tells testssl.sh how often an OpenSSL s_client connect
may fail before the program gives up and terminates. The default is 2. You can
increase it to a higher value if you frequently see a message like Fatal error:
repeated TCP connect problems, giving up.
• MAX_HEADER_FAIL: A number which tells testssl.sh how often a HTTP GET request over
OpenSSL may return an empty file before the program gives up and terminates. The
default is 3. Also here you can increase the threshold when you spot messages like
Fatal error: repeated HTTP header connect problems, doesn´t make sense to continue.
EXAMPLES
testssl.sh testssl.sh
does a default run on https://testssl.sh (protocols, standard cipher lists, PFS, server
preferences, server defaults, vulnerabilities, testing all known 370 ciphers, client
simulation.
testssl.sh testssl.net:443
does the same default run as above with the subtle difference that testssl.net has two
IPv4 addresses. Both are tested.
testssl.sh --ip=one --wide https://testssl.net:443
does the same checks as above, with the difference that one IP address is being picked
randomly. Displayed is everything where possible in wide format.
testssl.sh -6 https://testssl.net
As opposed to the first example it also tests the IPv6 part -- supposed you have an IPv6
network and your openssl supports IPv6 (see above).
testssl.sh -t smtp smtp.gmail.com:25
Checks are done via a STARTTLS handshake on the plain text port 25. It checks every IP on
smtp.gmail.com.
testssl.sh --starttls=imap imap.gmx.net:143
does the same on the plain text IMAP port.
Please note that for plain TLS-encrypted ports you must not specify the protocol option
when no STARTTLS handshake is offered: testssl.sh smtp.gmail.com:465 just checks the
encryption on the SMTPS port, testssl.sh imap.gmx.net:993 on the IMAPS port. Also MongoDB
which provides TLS support without STARTTLS can be tested directly.
RFCs and other standards
• RFC 2246: The TLS Protocol Version 1.0
• RFC 2818: HTTP Over TLS
• RFC 2595: Using TLS with IMAP, POP3 and ACAP
• RFC 3207: SMTP Service Extension for Secure SMTP over Transport Layer Security
• RFC 3501: INTERNET MESSAGE ACCESS PROTOCOL - VERSION 4rev1
• RFC 4346: The Transport Layer Security (TLS) Protocol Version 1.1
• RFC 4366: Transport Layer Security (TLS) Extensions
• RFC 4492: Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security
(TLS)
• RFC 5077: Transport Layer Security (TLS) Session Resumption
• RFC 5246: The Transport Layer Security (TLS) Protocol Version 1.2
• RFC 5280: Internet X.509 Public Key Infrastructure Certificate and Certificate
Revocation List (CRL) Profile
• RFC 5321: Simple Mail Transfer Protocol
• RFC 5746: Transport Layer Security (TLS) Renegotiation Indication Extension
• RFC 6066: Transport Layer Security (TLS) Extensions: Extension Definitions
• RFC 6101: The Secure Sockets Layer (SSL) Protocol Version 3.0
• RFC 6120: Extensible Messaging and Presence Protocol (XMPP): Core
• RFC 6125: Domain-Based Application Service Identity [..]
• RFC 6797: HTTP Strict Transport Security (HSTS)
• RFC 6961: The Transport Layer Security (TLS) Multiple Certificate Status Request
Extension
• RFC 7469: Public Key Pinning Extension for HTTP (HPKP)
• RFC 7507: TLS Fallback Signaling Cipher Suite Value (SCSV) for Preventing Protocol
Downgrade Attacks
• RFC 7627: Transport Layer Security (TLS) Session Hash and Extended Master Secret
Extension
• RFC 7633: X.509v3 Transport Layer Security (TLS) Feature Extension
• RFC 7465: Prohibiting RC4 Cipher Suites
• RFC 7685: A Transport Layer Security (TLS) ClientHello Padding Extension
• RFC 7905: ChaCha20-Poly1305 Cipher Suites for Transport Layer Security (TLS)
• RFC 7919: Negotiated Finite Field Diffie-Hellman Ephemeral Parameters for Transport
Layer Security
• RFC 8143: Using Transport Layer Security (TLS) with Network News Transfer Protocol
(NNTP)
• RFC 8446: The Transport Layer Security (TLS) Protocol Version 1.3
• W3C CSP: Content Security Policy Level 1-3
• TLSWG Draft: The Transport Layer Security (TLS) Protocol Version 1.3
EXIT STATUS
• 0 testssl.sh finished successfully without errors and without ambiguous results
• 1 testssl.sh has encountered exactly one ambiguous situation or an error during run
• 1+n same as previous. The errors or ambiguous results are added, also per IP.
• 50-200 reserved for returning a vulnerability scoring for system monitoring or a CI
tools
• 242 (ERR_CHILD) Child received a signal from master
• 244 (ERR_RESOURCE) Resources testssl.sh needs couldn´t be read
• 245 (ERR_CLUELESS) Weird state, either though user options or testssl.sh
• 246 (ERR_CONNECT) Connectivity problem
• 247 (ERR_DNSLOOKUP) Problem with resolving IP addresses or names
• 248 (ERR_OTHERCLIENT) Other client problem
• 249 (ERR_DNSBIN) Problem with DNS lookup binaries
• 250 (ERR_OSSLBIN) Problem with OpenSSL binary
• 251 (ERR_NOSUPPORT) Feature requested is not supported
• 252 (ERR_FNAMEPARSE) Input file couldn´t be parsed
• 253 (ERR_FCREATE) Output file couldn´t be created
• 254 (ERR_CMDLINE) Cmd line couldn´t be parsed
• 255 (ERR_BASH) Bash version incorrect
FILES
etc/*pem are the certificate stores from Apple, Linux, Mozilla Firefox, Windows and Java.
etc/client-simulation.txt contains client simulation data.
etc/cipher-mapping.txt provides a mandatory file with mapping from OpenSSL cipher suites
names to the ones from IANA / used in the RFCs.
etc/tls_data.txt provides a mandatory file for ciphers (bash sockets) and key material.
AUTHORS
Developed by Dirk Wetter, David Cooper and many others, see CREDITS.md .
COPYRIGHT
Copyright © 2012 Dirk Wetter. License GPLv2: Free Software Foundation, Inc. This is free
software: you are free to change and redistribute it under the terms of the license, see
LICENSE.
Attribution is important for the future of this project - also in the internet. Thus if
you´re offering a scanner based on testssl.sh as a public and/or paid service in the
internet you are strongly encouraged to mention to your audience that you´re using this
program and where to get this program from. That helps us to get bugfixes, other feedback
and more contributions.
Usage WITHOUT ANY WARRANTY. USE at your OWN RISK!
LIMITATION
All native Windows platforms emulating Linux are known to be slow.
BUGS
Probably. Current known ones and interface for filing new ones: https://testssl.sh/bugs/ .
SEE ALSO
ciphers(1), openssl(1), s_client(1), x509(1), verify(1), ocsp(1), crl(1), bash(1) and the
websites https://testssl.sh/ and https://github.com/drwetter/testssl.sh/ .
January 2020 TESTSSL(1)