Provided by: tidy_5.6.0-11ubuntu0.22.04.1_amd64 
NAME
tidy - check, correct, and pretty-print HTML(5) files
SYNOPSIS
tidy [options] [file ...] [options] [file ...] ...
DESCRIPTION
Tidy reads HTML, XHTML, and XML files and writes cleaned-up markup. For HTML variants, it
detects, reports, and corrects many common coding errors and strives to produce visually
equivalent markup that is both conformant to the HTML specifications and that works in
most browsers.
A common use of Tidy is to convert plain HTML to XHTML. For generic XML files, Tidy is
limited to correcting basic well-formedness errors and pretty printing.
If no input file is specified, Tidy reads the standard input. If no output file is
specified, Tidy writes the tidied markup to the standard output. If no error file is
specified, Tidy writes messages to the standard error.
OPTIONS
Tidy supports two different kinds of options. Purely command-line options, starting with
a single dash '-', can only be used on the command-line, not in configuration files. They
are listed in the first part of this section. Configuration options, on the other hand,
can either be passed on the command line, starting with two dashes --, or specified in a
configuration file, using the option name, followed by a colon :, plus the value, without
the starting dashes. They are listed in the second part of this section, with a sample
config file.
For command-line options that expect a numerical argument, a default is assumed if no
meaningful value can be found. On the other hand, configuration options cannot be used
without a value; a configuration option without a value is simply discarded and reported
as an error.
Using a command-line option is sometimes equivalent to setting the value of a
configuration option. The equivalent option and value are shown in parentheses in the
list below, as they would appear in a configuration file. For example, -quiet, -q (quiet:
yes) means that using the command-line option -quiet or -q is equivalent to setting the
configuration option quiet to yes.
Single-letter command-line options without an associated value can be combined; for
example '-i', '-m' and '-u' may be combined as '-imu'.
File manipulation
-output <file>, -o <file> (output-file: <file>)
write output to the specified <file>
-config <file>
set configuration options from the specified <file>
-file <file>, -f <file> (error-file: <file>)
write errors and warnings to the specified <file>
-modify, -m (write-back: yes)
modify the original input files
Processing directives
-indent, -i (indent: auto)
indent element content
-wrap <column>, -w <column> (wrap: <column>)
wrap text at the specified <column>. 0 is assumed if <column> is missing. When this
option is omitted, the default of the configuration option 'wrap' applies.
-upper, -u (uppercase-tags: yes)
force tags to upper case
-clean, -c (clean: yes)
replace FONT, NOBR and CENTER tags with CSS
-bare, -b (bare: yes)
strip out smart quotes and em dashes, etc.
-gdoc, -g (gdoc: yes)
produce clean version of html exported by Google Docs
-numeric, -n (numeric-entities: yes)
output numeric rather than named entities
-errors, -e (markup: no)
show only errors and warnings
-quiet, -q (quiet: yes)
suppress nonessential output
-omit (omit-optional-tags: yes)
omit optional start tags and end tags
-xml (input-xml: yes)
specify the input is well formed XML
-asxml, -asxhtml (output-xhtml: yes)
convert HTML to well formed XHTML
-ashtml (output-html: yes)
force XHTML to well formed HTML
-access <level> (accessibility-check: <level>)
do additional accessibility checks (<level> = 0, 1, 2, 3). 0 is assumed if <level>
is missing.
Character encodings
-raw output values above 127 without conversion to entities
-ascii use ISO-8859-1 for input, US-ASCII for output
-latin0
use ISO-8859-15 for input, US-ASCII for output
-latin1
use ISO-8859-1 for both input and output
-iso2022
use ISO-2022 for both input and output
-utf8 use UTF-8 for both input and output
-mac use MacRoman for input, US-ASCII for output
-win1252
use Windows-1252 for input, US-ASCII for output
-ibm858
use IBM-858 (CP850+Euro) for input, US-ASCII for output
-utf16le
use UTF-16LE for both input and output
-utf16be
use UTF-16BE for both input and output
-utf16 use UTF-16 for both input and output
-big5 use Big5 for both input and output
-shiftjis
use Shift_JIS for both input and output
Miscellaneous
-version, -v
show the version of Tidy
-help, -h, -?
list the command line options
-help-config
list all configuration options
-help-env
show information about the environment and runtime configuration
-show-config
list the current configuration settings
-export-config
list the current configuration settings, suitable for a config file
-export-default-config
list the default configuration settings, suitable for a config file
-help-option <option>
show a description of the <option>
-language <lang> (language: <lang>)
set Tidy's output language to <lang>. Specify '-language help' for more help. Use
before output-causing arguments to ensure the language takes effect, e.g.,`tidy
-lang es -lang help`.
XML
-xml-help
list the command line options in XML format
-xml-config
list all configuration options in XML format
-xml-strings
output all of Tidy's strings in XML format
-xml-error-strings
output error constants and strings in XML format
-xml-options-strings
output option descriptions in XML format
Configuration options can be specified by preceding each option with -- at the command
line, followed by its desired value, OR by placing the options and values in a
configuration file, and telling tidy to read that file with the -config option:
tidy --option1 value1 --option2 value2 ...
tidy -config config-file ...
Configuration options can be conveniently grouped in a single config file. A Tidy
configuration file is simply a text file, where each option is listed on a separate line
in the form
option1: value1
option2: value2
etc.
The permissible values for a given option depend on the option's Type. There are five
Types: Boolean, AutoBool, DocType, Enum, and String. Boolean Types allow any of yes/no,
y/n, true/false, t/f, 1/0. AutoBools allow auto in addition to the values allowed by
Booleans. Integer Types take non-negative integers. String Types generally have no
defaults, and you should provide them in non-quoted form (unless you wish the output to
contain the literal quotes).
Enum, Encoding, and DocType Types have a fixed repertoire of items, which are listed in
the Supported values sections below.
You only need to provide options and values for those whose defaults you wish to override,
although you may wish to include some already-defaulted options and values for the sake of
documentation and explicitness.
Here is a sample config file, with at least one example of each of the five Types:
// sample Tidy configuration options
output-xhtml: yes
add-xml-decl: no
doctype: strict
char-encoding: ascii
indent: auto
wrap: 76
repeated-attributes: keep-last
error-file: errs.txt
Below is a summary and brief description of each of the options. They are listed
alphabetically within each category.
Document Display options
--gnu-emacs Boolean (no if unset)
This option specifies if Tidy should change the format for reporting errors and
warnings to a format that is more easily parsed by GNU Emacs.
--markup Boolean (yes if unset)
This option specifies if Tidy should generate a pretty printed version of the
markup. Note that Tidy won't generate a pretty printed version if it finds
significant errors (see force-output).
--mute String
Use this option to prevent Tidy from displaying certain types of report output, for
example, for conditions that you wish to ignore.
This option takes a list of one or more keys indicating the message type to mute.
You can discover these message keys by using the mute-id configuration option and
examining Tidy's output.
See also: --mute-id
--mute-id Boolean (no if unset)
This option indicates whether or not Tidy should display message ID's with each of
its error reports. This could be useful if you wanted to use the mute configuration
option in order to filter out certain report messages.
See also: --mute
--quiet Boolean (no if unset)
When enabled, this option limits Tidy's non-document output to report only document
warnings and errors.
--show-body-only Enum (no if unset)
Supported values: no, yes, auto
This option specifies if Tidy should print only the contents of the body tag as an
HTML fragment.
If set to auto, this is performed only if the body tag has been inferred.
Useful for incorporating existing whole pages as a portion of another page.
This option has no effect if XML output is requested.
--show-errors Integer (6 if unset)
This option specifies the number Tidy uses to determine if further errors should be
shown. If set to 0, then no errors are shown.
--show-info Boolean (yes if unset)
This option specifies if Tidy should display info-level messages.
--show-warnings Boolean (yes if unset)
This option specifies if Tidy should suppress warnings. This can be useful when a
few errors are hidden in a flurry of warnings.
Document In and Out options
--add-meta-charset Boolean (no if unset)
This option, when enabled, adds a <meta> element and sets the charset attribute to
the encoding of the document. Set this option to yes to enable it.
--add-xml-decl Boolean (no if unset)
This option specifies if Tidy should add the XML declaration when outputting XML or
XHTML.
Note that if the input already includes an <?xml ... ?> declaration then this
option will be ignored.
If the encoding for the output is different from ascii, one of the utf* encodings,
or raw, then the declaration is always added as required by the XML standard.
See also: --char-encoding, --output-encoding
--add-xml-space Boolean (no if unset)
This option specifies if Tidy should add xml:space="preserve" to elements such as
<pre>, <style> and <script> when generating XML.
This is needed if the whitespace in such elements is to be parsed appropriately
without having access to the DTD.
--doctype String (auto if unset)
This option specifies the DOCTYPE declaration generated by Tidy.
If set to omit the output won't contain a DOCTYPE declaration. Note this this also
implies numeric-entities is set to yes.
If set to html5 the DOCTYPE is set to <!DOCTYPE html>.
If set to auto (the default) Tidy will use an educated guess based upon the
contents of the document. Note that selecting this option will not change the
current document's DOCTYPE on output.
If set to strict, Tidy will set the DOCTYPE to the HTML4 or XHTML1 strict DTD.
If set to loose, the DOCTYPE is set to the HTML4 or XHTML1 loose (transitional)
DTD.
Alternatively, you can supply a string for the formal public identifier (FPI).
For example:
doctype: "-//ACME//DTD HTML 3.14159//EN"
If you specify the FPI for an XHTML document, Tidy will set the system identifier
to an empty string. For an HTML document, Tidy adds a system identifier only if one
was already present in order to preserve the processing mode of some browsers. Tidy
leaves the DOCTYPE for generic XML documents unchanged.
This option does not offer a validation of document conformance.
--input-xml Boolean (no if unset)
This option specifies if Tidy should use the XML parser rather than the error
correcting HTML parser.
--output-html Boolean (no if unset)
This option specifies if Tidy should generate pretty printed output, writing it as
HTML.
--output-xhtml Boolean (no if unset)
This option specifies if Tidy should generate pretty printed output, writing it as
extensible HTML.
This option causes Tidy to set the DOCTYPE and default namespace as appropriate to
XHTML, and will use the corrected value in output regardless of other sources.
For XHTML, entities can be written as named or numeric entities according to the
setting of numeric-entities.
The original case of tags and attributes will be preserved, regardless of other
options.
--output-xml Boolean (no if unset)
This option specifies if Tidy should pretty print output, writing it as well-formed
XML.
Any entities not defined in XML 1.0 will be written as numeric entities to allow
them to be parsed by an XML parser.
The original case of tags and attributes will be preserved, regardless of other
options.
File Input-Output options
--error-file String
This option specifies the error file Tidy uses for errors and warnings. Normally
errors and warnings are output to stderr.
See also: --output-file
--keep-time Boolean (no if unset)
This option specifies if Tidy should keep the original modification time of files
that Tidy modifies in place.
Setting the option to yes allows you to tidy files without changing the file
modification date, which may be useful with certain tools that use the modification
date for things such as automatic server deployment.
Note this feature is not supported on some platforms.
--output-file String
This option specifies the output file Tidy uses for markup. Normally markup is
written to stdout.
See also: --error-file
--write-back Boolean (no if unset)
This option specifies if Tidy should write back the tidied markup to the same file
it read from.
You are advised to keep copies of important files before tidying them, as on rare
occasions the result may not be what you expect.
Diagnostics options
--accessibility-check Enum (0 (Tidy Classic) if unset)
Supported values: 0 (Tidy Classic), 1 (Priority 1 Checks), 2 (Priority 2 Checks), 3
(Priority 3 Checks)
This option specifies what level of accessibility checking, if any, that Tidy
should perform.
Level 0 (Tidy Classic) is equivalent to Tidy Classic's accessibility checking.
For more information on Tidy's accessibility checking, visit Tidy's Accessibility
Page at http://www.html-tidy.org/accessibility/.
--force-output Boolean (no if unset)
This option specifies if Tidy should produce output even if errors are encountered.
Use this option with care; if Tidy reports an error, this means Tidy was not able
to (or is not sure how to) fix the error, so the resulting output may not reflect
your intention.
--show-meta-change Boolean (no if unset)
This option enables a message whenever Tidy changes the content attribute of a meta
charset declaration to match the encoding of the document. Set this option to yes
to enable it.
--warn-proprietary-attributes Boolean (yes if unset)
This option specifies if Tidy should warn on proprietary attributes.
Encoding options
--char-encoding Encoding (utf8 if unset)
Supported values: raw, ascii, latin0, latin1, utf8, iso2022, mac, win1252, ibm858,
utf16le, utf16be, utf16, big5, shiftjis
This option specifies the character encoding Tidy uses for input, and when set,
automatically chooses an appropriate character encoding to be used for output. The
output encoding Tidy chooses may be different from the input encoding.
For ascii, latin0, ibm858, mac, and win1252 input encodings, the output-encoding
option will automatically be set to ascii. You can set output-encoding manually to
override this.
For other input encodings, the output-encoding option will automatically be set to
the the same value.
Regardless of the preset value, you can set output-encoding manually to override
this.
Tidy is not an encoding converter. Although the Latin and UTF encodings can be
mixed freely, it is not possible to convert Asian encodings to Latin encodings with
Tidy.
See also: --input-encoding, --output-encoding
--input-encoding Encoding (utf8 if unset)
Supported values: raw, ascii, latin0, latin1, utf8, iso2022, mac, win1252, ibm858,
utf16le, utf16be, utf16, big5, shiftjis
This option specifies the character encoding Tidy uses for input. Tidy makes
certain assumptions about some of the input encodings.
For ascii, Tidy will accept Latin-1 (ISO-8859-1) character values and convert them
to entities as necessary.
For raw, Tidy will make no assumptions about the character values and will pass
them unchanged to output.
For mac and win1252, vendor specific characters values will be accepted and
converted to entities as necessary.
Asian encodings such as iso2022 will be handled appropriately assuming the
corresponding output-encoding is also specified.
Tidy is not an encoding converter. Although the Latin and UTF encodings can be
mixed freely, it is not possible to convert Asian encodings to Latin encodings with
Tidy.
See also: --char-encoding
--newline Enum (LF if unset)
Supported values: LF, CRLF, CR
The default is appropriate to the current platform.
Genrally CRLF on PC-DOS, Windows and OS/2; CR on Classic Mac OS; and LF everywhere
else (Linux, macOS, and Unix).
--output-bom Enum (auto if unset)
Supported values: no, yes, auto
This option specifies if Tidy should write a Unicode Byte Order Mark character
(BOM; also known as Zero Width No-Break Space; has value of U+FEFF) to the
beginning of the output, and only applies to UTF-8 and UTF-16 output encodings.
If set to auto this option causes Tidy to write a BOM to the output only if a BOM
was present at the beginning of the input.
A BOM is always written for XML/XHTML output using UTF-16 output encodings.
--output-encoding Encoding (utf8 if unset)
Supported values: raw, ascii, latin0, latin1, utf8, iso2022, mac, win1252, ibm858,
utf16le, utf16be, utf16, big5, shiftjis
This option specifies the character encoding Tidy uses for output. Some of the
output encodings affect whether or not some characters are translated to entities,
although in all cases, some entities will be written according to other Tidy
configuration options.
For ascii, mac, and win1252 output encodings, entities will be used for all
characters with values over 127.
For raw output, Tidy will write values above 127 without translating them to
entities.
Output using latin1 will cause Tidy to write character values higher than 255 as
entities.
The UTF family such as utf8 will write output in the respective UTF encoding.
Asian output encodings such as iso2022 will write output in the specified encoding,
assuming a corresponding input-encoding was specified.
Tidy is not an encoding converter. Although the Latin and UTF encodings can be
mixed freely, it is not possible to convert Asian encodings to Latin encodings with
Tidy.
See also: --char-encoding
Cleanup options
--bare Boolean (no if unset)
This option specifies if Tidy should strip Microsoft specific HTML from Word 2000
documents, and output spaces rather than non-breaking spaces where they exist in
the input.
--clean Boolean (no if unset)
This option specifies if Tidy should perform cleaning of some legacy presentational
tags (currently <i>, <b>, <center> when enclosed within appropriate inline tags,
and <font>). If set to yes, then the legacy tags will be replaced with CSS <style>
tags and structural markup as appropriate.
--drop-empty-elements Boolean (yes if unset)
This option specifies if Tidy should discard empty elements.
--drop-empty-paras Boolean (yes if unset)
This option specifies if Tidy should discard empty paragraphs.
--drop-proprietary-attributes Boolean (no if unset)
This option specifies if Tidy should strip out proprietary attributes, such as
Microsoft data binding attributes. Additionally attributes that aren't permitted in
the output version of HTML will be dropped if used with strict-tags-attributes.
--gdoc Boolean (no if unset)
This option specifies if Tidy should enable specific behavior for cleaning up HTML
exported from Google Docs.
--logical-emphasis Boolean (no if unset)
This option specifies if Tidy should replace any occurrence of <i> with <em> and
any occurrence of <b> with <strong>. Any attributes are preserved unchanged.
This option can be set independently of the clean option.
--merge-divs Enum (auto if unset)
Supported values: no, yes, auto
This option can be used to modify the behavior of clean when set to yes.
This option specifies if Tidy should merge nested <div> such as
<div><div>...</div></div>.
If set to auto the attributes of the inner <div> are moved to the outer one. Nested
<div> with id attributes are not merged.
If set to yes the attributes of the inner <div> are discarded with the exception of
class and style.
See also: --clean, --merge-spans
--merge-spans Enum (auto if unset)
Supported values: no, yes, auto
This option can be used to modify the behavior of clean when set to yes.
This option specifies if Tidy should merge nested <span> such as
<span><span>...</span></span>.
The algorithm is identical to the one used by merge-divs.
See also: --clean, --merge-divs
--word-2000 Boolean (no if unset)
This option specifies if Tidy should go to great pains to strip out all the surplus
stuff Microsoft Word 2000 inserts when you save Word documents as "Web pages". It
doesn't handle embedded images or VML.
You should consider saving using Word's Save As..., and choosing Web Page,
Filtered.
Entities options
--ascii-chars Boolean (no if unset)
Can be used to modify behavior of the clean option when set to yes.
If set to yes when using clean, &emdash;, ”, and other named character
entities are downgraded to their closest ASCII equivalents.
See also: --clean
--ncr Boolean (yes if unset)
This option specifies if Tidy should allow numeric character references.
--numeric-entities Boolean (no if unset)
This option specifies if Tidy should output entities other than the built-in HTML
entities (&, <, >, and ") in the numeric rather than the named
entity form.
Only entities compatible with the DOCTYPE declaration generated are used.
Entities that can be represented in the output encoding are translated
correspondingly.
See also: --doctype, --preserve-entities
--preserve-entities Boolean (no if unset)
This option specifies if Tidy should preserve well-formed entities as found in the
input.
--quote-ampersand Boolean (yes if unset)
This option specifies if Tidy should output unadorned & characters as &.
--quote-marks Boolean (no if unset)
This option specifies if Tidy should output " characters as " as is preferred
by some editing environments.
The apostrophe character ' is written out as ' since many web browsers don't
yet support '.
--quote-nbsp Boolean (yes if unset)
This option specifies if Tidy should output non-breaking space characters as
entities, rather than as the Unicode character value 160 (decimal).
Repair options
--alt-text String
This option specifies the default alt= text Tidy uses for <img> attributes when the
alt= attribute is missing.
Use with care, as it is your responsibility to make your documents accessible to
people who cannot see the images.
--anchor-as-name Boolean (yes if unset)
This option controls the deletion or addition of the name attribute in elements
where it can serve as anchor.
If set to yes a name attribute, if not already existing, is added along an existing
id attribute if the DTD allows it.
If set to no any existing name attribute is removed if an id attribute exists or
has been added.
--assume-xml-procins Boolean (no if unset)
This option specifies if Tidy should change the parsing of processing instructions
to require ?> as the terminator rather than >.
This option is automatically set if the input is in XML.
--coerce-endtags Boolean (yes if unset)
This option specifies if Tidy should coerce a start tag into an end tag in cases
where it looks like an end tag was probably intended; for example, given
<span>foo <b>bar<b> baz</span>
Tidy will output
<span>foo <b>bar</b> baz</span>
--css-prefix String (c if unset)
This option specifies the prefix that Tidy uses for styles rules.
By default, c will be used.
--custom-tags Enum (no if unset)
Supported values: no, blocklevel, empty, inline, pre
This option enables the use of tags for autonomous custom elements, e.g. <flag-
icon> with Tidy. Custom tags are disabled if this value is no. Other settings -
blocklevel, empty, inline, and pre will treat all detected custom tags accordingly.
The use of new-blocklevel-tags, new-empty-tags, new-inline-tags, or new-pre-tags
will override the treatment of custom tags by this configuration option. This may
be useful if you have different types of custom tags.
When enabled these tags are determined during the processing of your document using
opening tags; matching closing tags will be recognized accordingly, and unknown
closing tags will be discarded.
See also: --new-blocklevel-tags, --new-empty-tags, --new-inline-tags, --new-pre-
tags
--enclose-block-text Boolean (no if unset)
This option specifies if Tidy should insert a <p> element to enclose any text it
finds in any element that allows mixed content for HTML transitional but not HTML
strict.
--enclose-text Boolean (no if unset)
This option specifies if Tidy should enclose any text it finds in the body element
within a <p> element.
This is useful when you want to take existing HTML and use it with a style sheet.
--escape-scripts Boolean (yes if unset)
This option causes items that look like closing tags, like </g to be escaped to
<\/g. Set this option to no if you do not want this.
--fix-backslash Boolean (yes if unset)
This option specifies if Tidy should replace backslash characters \ in URLs with
forward slashes /.
--fix-bad-comments Enum (auto if unset)
Supported values: no, yes, auto
This option specifies if Tidy should replace unexpected hyphens with = characters
when it comes across adjacent hyphens.
The default is auto will which will act as no for HTML5 document types, and yes for
all other document types.
HTML has abandonded SGML comment syntax, and allows adjacent hypens for all
versions of HTML, although XML and XHTML do not. If you plan to support older
browsers that require SGML comment syntax, then consider setting this value to yes.
--fix-style-tags Boolean (yes if unset)
This option specifies if Tidy should move all style tags to the head of the
document.
--fix-uri Boolean (yes if unset)
This option specifies if Tidy should check attribute values that carry URIs for
illegal characters and if such are found, escape them as HTML4 recommends.
--literal-attributes Boolean (no if unset)
This option specifies how Tidy deals with whitespace characters within attribute
values.
If the value is no Tidy normalizes attribute values by replacing any newline or tab
with a single space, and further by replacing any contiguous whitespace with a
single space.
To force Tidy to preserve the original, literal values of all attributes and ensure
that whitespace within attribute values is passed through unchanged, set this
option to yes.
--lower-literals Boolean (yes if unset)
This option specifies if Tidy should convert the value of an attribute that takes a
list of predefined values to lower case.
This is required for XHTML documents.
--repeated-attributes Enum (keep-last if unset)
Supported values: keep-first, keep-last
This option specifies if Tidy should keep the first or last attribute, if an
attribute is repeated, e.g. has two align attributes.
See also: --join-classes, --join-styles
--skip-nested Boolean (yes if unset)
This option specifies that Tidy should skip nested tags when parsing script and
style data.
--strict-tags-attributes Boolean (no if unset)
This options ensures that tags and attributes are applicable for the version of
HTML that Tidy outputs. When set to yes and the output document type is a strict
doctype, then Tidy will report errors. If the output document type is a loose or
transitional doctype, then Tidy will report warnings.
Additionally if drop-proprietary-attributes is enabled, then not applicable
attributes will be dropped, too.
When set to no, these checks are not performed.
--uppercase-attributes Enum (no if unset)
Supported values: no, yes, preserve
This option specifies if Tidy should output attribute names in upper case.
When set to no, attribute names will be written in lower case. Specifying yes will
output attribute names in upper case, and preserve can used to leave attribute
names untouched.
When using XML input, the original case is always preserved.
--uppercase-tags Boolean (no if unset)
This option specifies if Tidy should output tag names in upper case.
The default is no which results in lower case tag names, except for XML input where
the original case is preserved.
Transformation options
--decorate-inferred-ul Boolean (no if unset)
This option specifies if Tidy should decorate inferred <ul> elements with some CSS
markup to avoid indentation to the right.
--escape-cdata Boolean (no if unset)
This option specifies if Tidy should convert <![CDATA[]]> sections to normal text.
--hide-comments Boolean (no if unset)
This option specifies if Tidy should not print out comments.
--join-classes Boolean (no if unset)
This option specifies if Tidy should combine class names to generate a single, new
class name if multiple class assignments are detected on an element.
--join-styles Boolean (yes if unset)
This option specifies if Tidy should combine styles to generate a single, new style
if multiple style values are detected on an element.
--merge-emphasis Boolean (yes if unset)
This option specifies if Tidy should merge nested <b> and <i> elements; for
example, for the case
<b class="rtop-2">foo <b class="r2-2">bar</b> baz</b>,
Tidy will output <b class="rtop-2">foo bar baz</b>.
--replace-color Boolean (no if unset)
This option specifies if Tidy should replace numeric values in color attributes
with HTML/XHTML color names where defined, e.g. replace #ffffff with white.
Teaching Tidy options
--new-blocklevel-tags Tag Names
Supported values: tagX, tagY, ...
This option specifies new block-level tags. This option takes a space or comma
separated list of tag names.
Unless you declare new tags, Tidy will refuse to generate a tidied file if the
input includes previously unknown tags.
Note you can't change the content model for elements such as <table>, <ul>, <ol>
and <dl>.
This option is ignored in XML mode.
See also: --new-empty-tags, --new-inline-tags, --new-pre-tags, --custom-tags
--new-empty-tags Tag Names
Supported values: tagX, tagY, ...
This option specifies new empty inline tags. This option takes a space or comma
separated list of tag names.
Unless you declare new tags, Tidy will refuse to generate a tidied file if the
input includes previously unknown tags.
Remember to also declare empty tags as either inline or blocklevel.
This option is ignored in XML mode.
See also: --new-blocklevel-tags, --new-inline-tags, --new-pre-tags, --custom-tags
--new-inline-tags Tag Names
Supported values: tagX, tagY, ...
This option specifies new non-empty inline tags. This option takes a space or comma
separated list of tag names.
Unless you declare new tags, Tidy will refuse to generate a tidied file if the
input includes previously unknown tags.
This option is ignored in XML mode.
See also: --new-blocklevel-tags, --new-empty-tags, --new-pre-tags, --custom-tags
--new-pre-tags Tag Names
Supported values: tagX, tagY, ...
This option specifies new tags that are to be processed in exactly the same way as
HTML's <pre> element. This option takes a space or comma separated list of tag
names.
Unless you declare new tags, Tidy will refuse to generate a tidied file if the
input includes previously unknown tags.
Note you cannot as yet add new CDATA elements.
This option is ignored in XML mode.
See also: --new-blocklevel-tags, --new-empty-tags, --new-inline-tags, --custom-tags
Pretty Print options
--break-before-br Boolean (no if unset)
This option specifies if Tidy should output a line break before each <br> element.
--indent Enum (no if unset)
Supported values: no, yes, auto
This option specifies if Tidy should indent block-level tags.
If set to auto Tidy will decide whether or not to indent the content of tags such
as <title>, <h1>-<h6>, <li>, <td>, or <p> based on the content including a block-
level element.
Setting indent to yes can expose layout bugs in some browsers.
Use the option indent-spaces to control the number of spaces or tabs output per
level of indent, and indent-with-tabs to specify whether spaces or tabs are used.
See also: --indent-spaces
--indent-attributes Boolean (no if unset)
This option specifies if Tidy should begin each attribute on a new line.
--indent-cdata Boolean (no if unset)
This option specifies if Tidy should indent <![CDATA[]]> sections.
--indent-spaces Integer (2 if unset)
This option specifies the number of spaces or tabs that Tidy uses to indent content
when indent is enabled.
Note that the default value for this option is dependent upon the value of indent-
with-tabs (see also).
See also: --indent
--indent-with-tabs Boolean (no if unset)
This option specifies if Tidy should indent with tabs instead of spaces, assuming
indent is yes.
Set it to yes to indent using tabs instead of the default spaces.
Use the option indent-spaces to control the number of tabs output per level of
indent. Note that when indent-with-tabs is enabled the default value of indent-
spaces is reset to 1.
Note tab-size controls converting input tabs to spaces. Set it to zero to retain
input tabs.
--keep-tabs Boolean (no if unset)
With the default no Tidy will replace all source tabs with spaces, controlled by
the option tab-size, and the current line offset. Of course, except in the special
blocks/elements enumerated below, this will later be reduced to just one space.
If set yes this option specifies Tidy should keep certain tabs found in the source,
but only in preformatted blocks like <pre>, and other CDATA elements like <script>,
<style>, and other pseudo elements like <?php ... ?>. As always, all other tabs, or
sequences of tabs, in the source will continue to be replaced with a space.
--omit-optional-tags Boolean (no if unset)
This option specifies if Tidy should omit optional start tags and end tags when
generating output.
Setting this option causes all tags for the <html>, <head>, and <body> elements to
be omitted from output, as well as such end tags as </p>, </li>, </dt>, </dd>,
</option>, </tr>, </td>, and </th>.
This option is ignored for XML output.
--priority-attributes Attributes Names
Supported values: attributeX, attributeY, ...
This option allows prioritizing the writing of attributes in tidied documents,
allowing them to written before the other attributes of an element. For example,
you might specify that id and name are written before every other attribute.
This option takes a space or comma separated list of attribute names.
--punctuation-wrap Boolean (no if unset)
This option specifies if Tidy should line wrap after some Unicode or Chinese
punctuation characters.
--sort-attributes Enum (none if unset)
Supported values: none, alpha
This option specifies that Tidy should sort attributes within an element using the
specified sort algorithm. If set to alpha, the algorithm is an ascending alphabetic
sort.
When used while sorting with priority-attributes, any attribute sorting will take
place after the priority attributes have been output.
See also: --priority-attributes
--tab-size Integer (8 if unset)
This option specifies the number of columns that Tidy uses between successive tab
stops. It is used to map tabs to spaces when reading the input.
--tidy-mark Boolean (yes if unset)
This option specifies if Tidy should add a meta element to the document head to
indicate that the document has been tidied.
Tidy won't add a meta element if one is already present.
--vertical-space Enum (no if unset)
Supported values: no, yes, auto
This option specifies if Tidy should add some extra empty lines for readability.
The default is no.
If set to auto Tidy will eliminate nearly all newline characters.
--wrap Integer (68 if unset)
This option specifies the right margin Tidy uses for line wrapping.
Tidy tries to wrap lines so that they do not exceed this length.
Set wrap to 0 (zero) if you want to disable line wrapping.
--wrap-asp Boolean (yes if unset)
This option specifies if Tidy should line wrap text contained within ASP pseudo
elements, which look like: <% ... %>.
--wrap-attributes Boolean (no if unset)
This option specifies if Tidy should line-wrap attribute values, meaning that if
the value of an attribute causes a line to exceed the width specified by wrap, Tidy
will add one or more line breaks to the value, causing it to be wrapped into
multiple lines.
Note that this option can be set independently of wrap-script-literals. By default
Tidy replaces any newline or tab with a single space and replaces any sequences of
whitespace with a single space.
To force Tidy to preserve the original, literal values of all attributes, and
ensure that whitespace characters within attribute values are passed through
unchanged, set literal-attributes to yes.
See also: --wrap-script-literals, --literal-attributes
--wrap-jste Boolean (yes if unset)
This option specifies if Tidy should line wrap text contained within JSTE pseudo
elements, which look like: <# ... #>.
--wrap-php Boolean (yes if unset)
This option specifies if Tidy should line wrap text contained within PHP pseudo
elements, which look like: <?php ... ?>.
--wrap-script-literals Boolean (no if unset)
This option specifies if Tidy should line wrap string literals that appear in
script attributes.
Tidy wraps long script string literals by inserting a backslash character before
the line break.
See also: --wrap-attributes
--wrap-sections Boolean (yes if unset)
This option specifies if Tidy should line wrap text contained within <![ ... ]>
section tags.
ENVIRONMENT
HTML_TIDY
Name of the default configuration file. This should be an absolute path, since you
will probably invoke tidy from different directories. The value of HTML_TIDY will
be parsed after the compiled-in default (defined with -DTIDY_CONFIG_FILE), but
before any of the files specified using -config.
RUNTIME CONFIGURATION FILES
You can also specify runtime configuration files from which tidy will attempt to
load a configuration automatically.
The system runtime configuration file (/etc/tidy.conf), if it exists will be loaded
and applied first, followed by the user runtime configuration file (~/.tidyrc).
Subsequent usage of a specific option will override any previous usage.
Note that if you use the HTML_TIDY environment variable, then the user runtime
configuration file will not be used. This is a feature, not a bug.
EXIT STATUS
0 All input files were processed successfully.
1 There were warnings.
2 There were errors.
SEE ALSO
For more information about HTML Tidy:
http://www.html-tidy.org/
For more information on HTML:
HTML: Edition for Web Authors (the latest HTML specification)
http://dev.w3.org/html5/spec-author-view
HTML: The Markup Language (an HTML language reference)
http://dev.w3.org/html5/markup/
For bug reports and comments:
https://github.com/htacg/tidy-html5/issues/
Or send questions and comments to public-htacg@w3.org.
Validate your HTML documents using the W3C Nu Markup Validator:
http://validator.w3.org/nu/
AUTHOR
Tidy was written by Dave Raggett <dsr@w3.org>, and subsequently maintained by a team at
http://tidy.sourceforge.net/, and now maintained by HTACG (http://www.htacg.org).
The sources for HTML Tidy are available at https://github.com/htacg/tidy-html5/ under the
MIT Licence.