NAME

       tig - text-mode interface for Git

SYNOPSIS

       tig        [options] [revisions] [--] [paths]
       tig log    [options] [revisions] [--] [paths]
       tig show   [options] [revisions] [--] [paths]
       tig reflog [options] [revisions]
       tig blame  [options] [rev] [--] path
       tig grep   [options] [pattern]
       tig refs   [options]
       tig stash
       tig status
       tig <      [Git command output]

DESCRIPTION

       Tig is an ncurses-based text-mode interface for git(1). It functions mainly as a Git repository browser,
       but can also assist in staging changes for commit at chunk level and act as a pager for output from
       various Git commands.

OPTIONS

       Command line options recognized by Tig include all valid git-log(1) and git-diff(1) options, as well as
       the following subcommands and Tig-specific options. The first command line parameter not starting with
       "-" is interpreted as being either a revision specification or a path and will end the option parsing.
       All additional options will be passed to the underlying Git command.

       show
           Open diff view using the given git-show(1) options.

       blame
           Show given file annotated by commits. Takes zero or more git-blame(1) options. Optionally limited
           from given revision.

       status
           Start up in status view.

       log
           Start up in log view, displaying git-log(1) output.

       reflog
           Start up in reflog view.

       refs
           Start up in refs view.

       stash
           Start up in stash view.

       grep
           Open the grep view. Supports the same options as git-grep(1).

       +<number>
           Show the first view with line <number> visible and selected.

       -v, --version
           Show version and exit.

       -h, --help
           Show help message and exit.

       -C<path>
           Run as if Tig was started in <path> instead of the current working directory.

PAGER MODE

       Tig enters pager mode when input is provided via stdin and supports the following subcommands and
       options:

       •   When the show subcommand is specified and the --stdin option is given, stdin is assumed to be a list
           of commit IDs and will be forwarded to the diff view’s underlying git-show(1) command. For example:

           $ git rev-list --author=vivien HEAD | tig show --stdin

       •   When --stdin is given, stdin is assumed to be a list of commit IDs and will be forwarded to the main
           view’s underlying git-log(1) command. For example:

           $ tig --no-walk --stdin < cherry-picks.txt

       •   When --pretty=raw is given, stdin is assumed to be a "pretty=raw" formatted output similar to that of
           git-log(1). For example:

           $ git reflog --pretty=raw | tig --pretty=raw

       When no subcommands nor options are given, the pager view will be used for displaying the Git command
       input given on stdin. The pager view assumes the input is either from git-log(1) or git-diff(1) and will
       highlight it similar to the log and diff views. For example:

           $ git log -Schange -p --raw | tig

EXAMPLES

       Display the list of commits for the current branch:

           $ tig

       Display commits from one or more branches:

           $ tig test master

       Pretend as if all the refs in refs/ are listed on the command line:

           $ tig --all

       Display differences between two branches:

           $ tig test..master

       Display changes for sub-module versions:

           $ tig --submodule

       Display changes for a single file:

           $ tig -- README

       Display contents of the README file in a specific revision:

           $ tig show tig-0.8:README

       Display revisions between two dates for a specific file:

           $ tig --after="2004-01-01" --before="2006-05-16" -- README

       Blame file with copy detection enabled:

           $ tig blame -C README

       Display the list of stashes:

           $ tig stash

       Grep all files for lines containing DEFINE_ENUM:

           $ tig grep -p DEFINE_ENUM

       Show references (branches, remotes and tags):

           $ tig refs

       Use word diff in the diff view:

           $ tig --word-diff=plain

ENVIRONMENT VARIABLES

       In addition to environment variables used by Git (e.g. GIT_DIR), Tig defines the ones below. The command
       related environment variables have access to the internal state of Tig via replacement variables, such as
       %(commit) and %(blob). See tigrc(5) for a full list.

       TIGRC_USER
           Path of the user configuration file (defaults to ~/.tigrc or $XDG_CONFIG_HOME/tig/config).

       TIGRC_SYSTEM
           Path of the system wide configuration file (defaults to {sysconfdir}/tigrc). Define to empty string
           to use built-in configuration.

       TIG_LS_REMOTE
           Command for retrieving all repository references. The command should output data in the same format
           as git-ls-remote(1).

       TIG_DIFF_OPTS
           The diff options to use in the diff view. The diff view uses git-show(1) for formatting and always
           passes --patch-with-stat. You may also set the diff-options setting in the configuration file.

       TIG_TRACE
           Path for trace file where information about Git commands are logged.

       TIG_SCRIPT
           Path to script that should be executed automatically on startup. If this environment variable is
           defined to the empty string, the script is read from stdin. The script is interpreted line-by-line
           and can contain prompt commands and key mappings.

       TIG_NO_DISPLAY
           Open Tig without rendering anything to the terminal. This force Ncurses to write to /dev/null. The
           main use is for automated testing of Tig.

FILES

       $XDG_CONFIG_HOME/tig/config, ~/.config/tig/config, ~/.tigrc
           The Tig user configuration file is loaded in the following way. If $XDG_CONFIG_HOME is set, read user
           configuration from $XDG_CONFIG_HOME/tig/config. If $XDG_CONFIG_HOME is empty or undefined, read user
           configuration from ~/.config/tig/config if it exists and fall back to ~/.tigrc if it does not exist.
           See tigrc(5) for examples.

       /etc/tigrc
           System wide configuration file.

       $GIT_DIR/config, ~/.gitconfig, /etc/gitconfig
           Git configuration files. Read on start-up with the help of git-config(1).

       $XDG_DATA_HOME/tig/history, ~/.local/share/tig/history, ~/.tig_history
           When compiled with readline support, Tig writes a persistent command and search history. The location
           of the history file is determined in the following way. If $XDG_DATA_HOME is set and
           $XDG_DATA_HOME/tig/ exists, store history to $XDG_DATA_HOME/tig/history. If $XDG_DATA_HOME is empty
           or undefined, store history to ~/.local/share/tig/history if the directory ~/.local/share/tig/
           exists, and fall back to ~/.tig_history if it does not exist.

BUGS

       Please visit Tig’s home page[1] or main Git repository[2] for information about new releases and how to
       report bugs or feature request.

COPYRIGHT

       Copyright (c) 2006-2014 Jonas Fonseca <jonas.fonseca@gmail.com[3]>

       This program is free software; you can redistribute it and/or modify it under the terms of the GNU
       General Public License as published by the Free Software Foundation; either version 2 of the License, or
       (at your option) any later version.

SEE ALSO

       tigrc(5), tigmanual(7), git(7)

NOTES

        1. home page
           https://jonas.github.io/tig

        2. main Git repository
           https://github.com/jonas/tig

        3. jonas.fonseca@gmail.com
           mailto:jonas.fonseca@gmail.com

Tig 2.5.1                                          01/05/2021                                             TIG(1)