Provided by: xpra_3.1-1build5_amd64 
NAME
xpra - viewer for remote, persistent X applications
SYNOPSIS
xpra start [CONNECTIONSTRING] | xpra start-desktop [CONNECTIONSTRING] [OPTIONS..]
xpra attach [CONNECTIONSTRING] [OPTIONS..]
xpra shadow [CONNECTIONSTRING] [OPTIONS..]
xpra proxy [:DISPLAY] [OPTIONS..]
xpra stop | xpra exit | xpra detach | xpra screenshot filename | xpra version | xpra info
[CONNECTIONSTRING] | xpra top [CONNECTIONSTRING] [OPTIONS..]
xpra control [CONNECTIONSTRING] command [arguments..] [--ssh=CMD] [--remote-xpra=CMD]
[--socket-dir=DIR] [--socket-dirs=DIRS]
xpra initenv [--socket-dir=DIR]
xpra list [--socket-dir=DIR]
xpra list-windows [--socket-dir=DIR]
xpra showconfig [OPTIONS..]
xpra showsetting [SETTING1..]
xpra list-mdns
xpra upgrade [:DISPLAY] [...any options accepted by xpra start...]
xpra upgrade-desktop [:DISPLAY] [...any options accepted by xpra start-desktop...]
DESCRIPTION
Xpra is a tool which allows you to run X programs — usually on a remote host — and then
direct their display to your local machine, disconnect from these programs, and reconnect
from the same or another machine, all without losing any state. It differs from standard
X forwarding in that it allows disconnection and reconnection without disrupting the
forwarded application; it differs from VNC and similar remote display technologies in that
xpra can run rootless: i.e., applications forwarded by xpra appear on your desktop as
normal windows managed by your window manager, rather than being all "trapped in a box
together". Xpra also uses a custom protocol that is self-tuning and relatively latency-
insensitive, and thus is usable over network connections that are too slow or unreliable
for standard X forwarding. Xpra can also be used to shadow an existing X11 display, or in
desktop mode where it behaves more like VNC.
By default the Xpra server announces available sessions (username and display number) via
mDNS to the local network. Use mdns=no to disable it.
CONNECTION STRINGS
Xpra supports many types of connection strings (some may require extra packages to be
installed):
:DISPLAY
Local displays: this is the simplest form and is only valid for the current local displays
of the current user.
tcp://[USERNAME@]HOST:PORT[/DISPLAY]
TCP mode uses port numbers and not display numbers. If multiple displays are available
through a single TCP port (ie: using a proxy server), then one can also specify the
display number.
ssl://[USERNAME@]HOST:PORT[/DISPLAY]
SSL adds a secure socket layer on top of the TCP mode.
vsock://[USERNAME[:PASSWORD]@]HOST:PORT
Almost identical to the TCP mode, but using AF_VSOCK for transport.
ws://[USERNAME[:PASSWORD]@]HOST:PORT/[DISPLAY]
Connect using websocket protocol.
wss://[USERNAME[:PASSWORD]@]HOST:PORT/[DISPLAY]
Connect using secure websocket protocol. (websocket with SSL)
ssh://[USERNAME[:PASSWORD]@]HOST[:SSH_PORT]/[DISPLAY][?QUERYSTRING]
Connect using secure shell. (SSH)
Further options can be specified using the --ssh command line option. The QUERYSTRING can
be used to specify an ssh proxy: ?proxy=ssh://[USERNAME[:PASSWORD]@]HOST[:SSH_PORT] xpra
will then establish an SSH connection to the specified "proxy" host, and from that host
xpra will set up an SSH connection to the xpra server.
For backwards compatibility, SSH mode also supports the syntax:
ssh:[USERNAME[:PASSWORD]@]HOST:DISPLAY but this form does not support specifying the SSH
port number. Older versions also used the form protocol:host:port, but users are
encouraged to move to a more standard URI format using :// as separator.
The password need only be specified when the server authentication module requires it.
(ie: often when authenticating against MS Windows servers, or with multifile and sqlite
authentication modules)
EXAMPLES
xpra start :7
Start an xpra server using display number :7. Note: using DISPLAY=:7 xterm to start
applications against a specific display is not recommended. Always prefer using
xpra's --start= command line option instead. See this next example:
xpra start --start=firefox
Start an xpra server, choosing a display automatically and start firefox on that
virtual display. No window will appear until you attach with xpra attach. The start
child commands will inherit an environment tailored for running under xpra.
xpra start ssh://bigbox/7 --start=xterm
Start an xpra server on bigbox with an xterm in it, and connect to it.
xpra start-desktop --start=xfce4-session
Start an xfce session in a nested X11 server on an automatically assigned display
number.
xpra list
Show a list of xpra servers you have running on the current host.
xpra list-windows
Show a list of xpra servers you have running on the current host, including the
session name and a list of windows. (only if the session can be queried using xpra
info)
xpra list-mdns
Show a list of xpra servers found via mDNS. (local network)
xpra showconfig
Shows the configuration that would be used with other sub-commands, taking into
account the command line arguments.
xpra showsetting [SETTING1..]
Shows the value of a specific configuration setting and which configuration directory
set this value.
xpra attach :7
Attach to the xpra server that is using local display number :7. Any apps running on
that server will appear on your screen.
xpra attach ssh://foo@frodo/7
Use ssh to attach to the xpra server that is running on machine frodo as user foo and
using display :7. Any apps running on that server will appear on your local screen.
xpra start :7 --start=screen
Start an xpra server and a screen(1) session. If any of the applications inside
screen attempt to use X, they will be directed to the xpra server.
DISPLAYS
Understanding the basic idea of displays is critical to using xpra successfully.
The idea comes from standard X. If you have multiple X servers running on the same host,
then there has to be some way to distinguish them. X does this by assigning each server a
small, unique integer called (perhaps confusingly) its "display". In the common case of a
desktop machine that has only one X server running, that server uses display ":0" (or
sometimes you'll see ":0.0", which is effectively the same). When an application starts
under X, it needs to know how to find the right X server to use; it does this by checking
the environment variable $DISPLAY.
Xpra faces a similar problem — there may be multiple xpra servers running on the same
host, as well as multiple X servers. It solves this problem by re-using X's solution —
each xpra server has a display associated with it. This display functions as both an X
display (for when xpra is talking to X applications) and as an identifier by which xpra
clients (like xpra attach) can locate the xpra server.
You may omit the display number when using xpra start: a display will be chosen for you
automatically. The display number chosen will be shown in the log output, you should also
be able to see it with xpra list. On Microsoft Windows and Mac OSX, the display number
should be omitted.
Otherwise, when starting an xpra server, you may want to specify the name of the display
to use. To do this, simply pick any number you like and stick a colon in front of it.
For instance :7, :12, and :3117 are all valid display names. Just keep in mind that:
· Every X or xpra server that is running on a single machine must use a different
display name. If you pick a number that is already in use then xpra will not work.
· The first few numbers (0, 1, 2) are commonly used by real X servers.
· Everyone who connects to a given machine using ssh(1) with X forwarding enabled
will also use a display number; ssh generally picks numbers near ten (10, 11, 12,
...).
When specifying an xpra server to a client program like xpra attach, xpra detach, xpra
stop, xpra exit, xpra version, xpra info, xpra list or xpra screenshot then you can use a
display of the form :DISPLAY to refer to a server on the local host, or one of the form
ssh://[USER@]HOST/DISPLAY to refer to a server on a remote host; xpra will automatically
connect to the remote host using ssh(1). Generally, if you have only one xpra session
running on a machine (which you can verify by running xpra list on that machine), then you
can omit the number entirely; xpra attach alone will attach to the lone xpra server on the
current machine regardless of its number, xpra attach ssh://frodo will similarly attach to
the lone xpra session on a remote machine.
Connecting using the display number assumes that the client and server use the same
configuration for socket directories, or at least that the client can find at least one of
the directories used by the unix domain sockets (see bind, socket-dir and socket-dirs).
If the xpra server was given the --bind-tcp, --bind-ssl --bind-udp=[HOST]:PORT, --bind-ws,
--bind-wss or --bind-vsock option when started then you can also connect to it using a
display of the form tcp://HOST:PORT[/DISPLAY], udp://HOST:PORT[/DISPLAY],
ssl://HOST:PORT[/DISPLAY], ws://HOST:PORT[/DISPLAY], wss://HOST:PORT[/DISPLAY] or
vsock://HOST:PORT[/DISPLAY].
SUBCOMMANDS
xpra start
This command starts a new xpra server, including any necessary setup. (When starting a
remote server with the ssh://HOST/DISPLAY syntax, the new session will also be attached.)
xpra start-desktop
Starts a nested X11 server, all child commands will be started in the nested X11 server.
xpra attach
This command attaches to a running xpra server, and forwards any applications using that
server to appear on your current screen.
xpra detach
Detaches the given xpra display.
xpra screenshot
Takes a screenshot and saves it to the filename specified. Note: screenshots can only be
taken when a client is attached.
xpra version
Queries the server version and prints it out. Note: older servers may not support this
feature.
xpra info
Queries the server for version, status and statistics.
xpra top
Shows the server's key health attributes.
xpra control
Modify the server at runtime by issuing commands. The list of commands can be obtained by
specifying "help" as command. Some of those commands may support a "help" mode
themselves.
xpra initenv
This internal command creates the run-xpra script used with ssh connections.
xpra stop
This command attaches to a running xpra server, and requests that it terminates
immediately. This generally causes any applications using that server to terminate as
well.
xpra exit
This command attaches to a running xpra server, and requests that it terminates
immediately. Unlike xpra stop, the Xvfb process and its X11 clients (if any) will be left
running.
xpra showconfig
This commands shows the configuration which would be used given the arguments provided.
You can also specify as extra arguments the specific options that should be displayed, or
use the special value all to display all the options including the ones which are normally
not displayed because they are not relevant on the given system.
xpra list
This command finds all xpra servers that have been started by the current user on the
current machine, and lists them.
xpra upgrade
This command starts a new xpra server, but instead of creating it from scratch, it
attaches to another existing server, tells it to exit, and takes over managing the
applications that it was managing before. As the name suggests, the main use case is to
replace a server running against an older version of xpra with a newer version, without
having to restart your session. Any currently-running xpra attach command will exit and
need to be restarted.
xpra upgrade-desktop
Same as upgrade but for servers started using start-desktop. It is possible to upgrade
seamless server into a desktop server and vice versa.
xpra shadow
This command shadows an existing X11 display. If there is only one X11 display active and
its number is below 10, it can be auto-detected.
Note that this mode of operation uses screenscraping which is far less efficient. Using a
video encoder (h264 or vp8) is highly recommended for this mode of operation.
xpra proxy
This command allows a single server to proxy connections for multiple others, potentially
serving as a load balancing or authentication entry point for many sessions. The proxy
server will spawn a new process for each proxy connection, this proxy process will create
an unauthenticated new unix domain socket which can be used with the subcommands info,
version and stop.
Important Note
Some platforms and package managers may choose to only build the client and not the
server. In this case, only the attach subcommand will be available.
OPTIONS
General options
--version
Displays xpra's version number.
-h, --help
Displays a summary of command line usage.
-d FILTER1,FILTER2,..., --debug=FILTER1,FILTER2,...
Enable debug logging. The special value all enables all debugging.
--mmap=yes|no|ABSOLUTEFILENAME
Enable or disable memory mapped pixel data transfer. By default it is normally
enabled automatically if the server and the client reside on the same filesystem
namespace. This method of data transfer offers much lower overheads and reduces
both CPU consumption and local network traffic. When attaching, you can also
specify an absolute path where the mmap file will be created.
--mmap-group=GROUP
Sets the mmap file's gid to the group specified, and sets the permissions to 660.
This is necessary to share the mmap file across user accounts. You can also use
the special GROUP values:
no Disable the functionality, the mmap file will use the default file
permissions and default group ownership.
SOCKET The group used will be the same one as found on the unix domain socket file
the client connects to. Obviously, this can only work when connecting to
unix domain sockets.
auto Will use the 'xpra' group if the user is a member, otherwise it will
fallback to the same behaviour as SOCKET.
--windows=yes|no
Enable or disable the forwarding of windows. This is usually the primary use for
xpra and should be enabled.
--min-size=WIDTHxHEIGHT
Sets the minimum size for all decorated windows.
--max-size=WIDTHxHEIGHT
Sets the maximum size for all windows.
--readonly=yes|no
Read only mode ignores all keyboard and mouse activity.
--clipboard=yes|no|clipboard-type
Enable or disable clipboard synchronization. If disabled on the server, no clients
will be able to use clipboard synchronization at all. If turned off on the client,
only this particular connection will ignore clipboard data from the server. This
can also be used to specify a different clipboard implementation. The clipboard
types available will vary from platform to platform and also depend on build time
environment and options so this is best left on auto. Other clipboard types
available may include:
translated
Clipboard which can translate from one type of selection to another
GDK The most complete clipboard implementation, includes full X11 support
default
Fallback clipboard, with limited X11 support
OSX OSX specific clipboard
--clipboard-direction=to-server|to-client|both|disabled
Choose the direction of the clipboard synchronization.
--pulseaudio=yes|no
Enable or disable the starting of a pulseaudio server with the session.
--pulseaudio-command=SERVER-START-COMMAND
Specifies the pulseaudio command to use to start the pulseaudio server, unless
disabled with pulseaudio=no.
--session-name=VALUE
Sets the name of this session. This value may be used in notifications, utilities,
tray menu, etc. Setting this value on the server provides a default value which
may be overridden on the client.
--encoding=ENCODING
This specifies the image encoding to use, there are a number of encodings
supported: jpeg, png, png/P, png/L, webp, rgb, vp8, vp9, h264 and h265 (some may
not be available in your environment). The default option is auto which allows the
server to select the best encoding automatically.
auto default mode: the built-in heuristics will choose the most appropriate
encoding
png compressed and lossless, can be quite slow.
png/P compressed and lossy: it uses a colour palette, which means better
compression but still slow.
png/L compressed and lossy: grayscale only using a palette.
rgb a raw pixel format (lossless) compressed with lz4, lzo or zlib (see
compressors) the compression ratio is lower, but it is by far the fastest
encoding available.
webp can be used in lossy or lossless mode, useful for graphical applications, it
compresses better than jpeg and is reasonably fast except at high
resolutions.
jpeg can be useful for graphical applications, it is lossy and usually very fast.
vp8 lossy video encoding which always uses colour subsampling. Fast at encoding
and decoding.
vp9 Video encoding which supports both lossy and lossless modes, available if
your ffmpeg library version is recent enough.
h264 One of the best encoding available: it is fast, efficient and tunable via
the quality and speed options.
h265 Far too slow at encoding, avoid.
The default encoding which is automatically selected if you do not specify one will depend
on what options are available on both the server and the client: rgb is always available
(builtin), jpeg and png require the Python Imaging Library, vp8, vp9, webp, h264 and h265
all require their respective shared libraries, as well as the xpra codec that uses them.
Note: when selecting a video encoding (usually h264, vp8 or vp9), it will only be used if
the screen is updating quickly enough, some of the smaller screen updates will also be
sent using one of the other non-video encodings.
--video-scaling=on|off|SCALING
How much automatic video downscaling should be used, from 1 (rarely) to 100
(aggressively), 0 to disable. Video scaling is normally used with video regions or
very large windows (especially full screen windows) to try to maintain a decent
framerate. Video downscaling negatively affects visual quality and will cause
automatic refreshes (if enabled), it is most useful on video content where it saves
a considerable amount of bandwidth.
--socket-dir=DIR
Location where to write and look for the Xpra socket files. The default location
varies from platform to platform ("~/.xpra" on most Posix systems). If
unspecified, the first value from socket-dirs will be used. It may also be
specified using the XPRA_SOCKET_DIR environment variable.
When using the socket-dir option, it is generally necessary to specify socket-dir
or socket-dirs on all following commands, for xpra to work with the open sessions.
By specifying a shared directory this can be coupled with the mmap-group and
socket-permissions option to connect Xpra sessions across user accounts with shared
memory acceleration.
--socket-dirs=DIR
Specifies the directories where to look for existing sockets if a specific one was
not set using socket-dir. You may specify each directory using a new --socket-dirs
command line argument, or joined together by the path separator (: on Posix). The
paths will be expanded. (ie: --socket-dirs=~/.xpra:/tmp)
--file-transfer=on|off
Enable file transfers.
--open-files=on|off
This option may be used to allow the remote end to automatically open files after
they have been uploaded. This may be a security risk if you are using xpra to
constrain what the clients can execute on the server.
--forward-xdg-open=on|off
Intercept execution of xdg-open and forward the request to the client.
--open-command=COMMAND
The command to use for opening files and URLs.
--bandwidth-limit=BITSPERSECOND
Restrict bandwidth usage to below the limit given. The client's value cannot raise
the limit of the server. The value may be specified using standard units, ie:
1Mbps or 500K. In auto mode, the client will set the bandwidth limit value to 80%
of the maximum speed of the network interface it is using to connect to the server.
Options for start, start-desktop, upgrade, proxy and shadow
--daemon=yes|no
By default, the xpra server puts itself into the background, i.e. 'daemonizes', and
redirects its output to a log file. This can be used to prevent that behavior
(useful mostly for debugging).
--resize-display=yes|no
Resize the virtual display to match the resolution of the client currently
connected. This only applies to the start and start-desktop subcommands.
--fake-xinerama=PATH|auto|no
Specify the path to the libfakeXinerama.so library which will be injected into all
the child processes the server starts using LD_PRELOAD. This can also be disabled
or set to auto: the server will then try to locate the library itself. This only
applies to the start subcommand.
--chdir=DIR
Change to this directory after daemonizing.
--uid=UID and --gid=GID
When launching the server as root, these options can be used to drop privileges to
the given UID / GID.
--pidfile=FILENAME
Writes the server process ID to this file on startup. If the file has not been
replaced, it will be deleted when the server exits.
--bind=BIND_LOCATION
Create a local Unix domain socket (on Unix) or named-pipe (on MS Windows) for each
bind option specified.
This option can be specified multiple times to specify multiple socket locations.
These sockets support local connections with the :7-style display address, and
remote connections with the ssh://frodo/7-style display address.
Local sockets may also process HTTP / Websocket connections if the html switch is
enabled.
The location can take the form:
none do not create a socket
auto backwards compatible default which uses the current socket-dir
DIRECTORY/
create a socket in the directory specified, if the directory does not exist
then it will be created - you should include the trailing slash to prevent
the confusion with the PATH form:
PATH create the socket using the path specified
--bind-tcp=[HOST]:PORT
Create a TCP socket for each --bind-tcp option specified. If the host portion is
omitted, then 127.0.0.1 (localhost) will be used. If you wish to accept
connections on all interfaces, pass 0.0.0.0 for the host portion.
Using this switch without using the tcp-auth option is not recommended, and is a
major security risk (especially when passing 0.0.0.0)! Anyone at all may connect
to this port and access your session.
TCP sockets may also process HTTP / Websocket connections if the html switch is
enabled. TCP sockets may also be upgraded to SSL sockets if the ssl switch is
enabled.
--bind-udp=[HOST]:PORT
Create a UDP socket for each --bind-udp option specified. If the host portion is
omitted, then 127.0.0.1 (localhost) will be used. If you wish to accept
connections on all interfaces, pass 0.0.0.0 for the host portion.
Using this switch without using the udp-auth option is not recommended, and is a
major security risk (especially when passing 0.0.0.0)! Anyone at all may connect
to this port and access your session. UDP sessions are trivial to hijack for
anyone able to sniff even just a single packet, it should only be used in very
specific use-cases, and never over unsecured networks.
--bind-ws=[HOST]:PORT
Create an HTTP / Websocket listener. See bind-tcp for host restrictions, you
should use the auth-ws to secure access.
--bind-wss=[HOST]:PORT
Create an HTTPS / Secure Websocket listener. See bind-tcp for host restrictions,
you should use the auth-wss to secure access.
--bind-ssl=[HOST]:PORT
Just like --bind-tcp but for SSL sockets. See ssl-auth and the other SSL options.
--bind-rfb=[HOST]:PORT
Listens for RFB connections on the given port. These sockets are only supported
with the start-desktop and shadow modes.
--bind-vsock=CID:PORT
Create a VSOCK socket for each --bind-vsock option specified.
--auth=MODULE[:OPTION=VALUE]
Specifies the authentication module to use for unix domain sockets created using
the bind switch. Authentication modules can validate a username and password
against a variety of backend modules:
allow always allows authentication - this is dangerous and should only be used for
testing
fail always fails authentication, useful for testing
env matches against the environment variable specified by the name option (which
defaults to XPRA_PASSWORD). ie: --auth=env:name=SOME_OTHER_ENV_VAR_NAME.
password
matches against the password specified using the value option. ie:
--auth=password:value=YOURPASSWORD. Note: this command line option may be
exposed to other processes on the same system.
file checks the password against the password data found in the file specified
using the filename option. ie: --auth=file:filename=./password.txt.
The contents of this file will be treated as binary data, there are no
restrictions on character encodings or file size. Beware of trailing
newline characters which will be included in the password data.
multifile
checks the username and password against the file specified using the
filename option. The file must contain each user credentials on one line of
the form:
username|password|uid|gid|displays|env_opts|session_opts
It is not possible to have usernames or password that contain the pipe
character | which is used as delimiter, or newlines and carriage returns.
This module is deprecated, sqlite should be used instead.
sqlite
mysql
sql checks the username and password against the sqlite database file specified
using the filename option (for the sqlite backend), or the database
specified using the uri option (mysql and sql backends). The authentication
will be processed using the following query (which is configurable using the
password_query option): SELECT password FROM users WHERE username=(?) The
sessions available for each user will be queried using: (this is
configurable using the sessions_query option): SELECT uid, gid, displays,
env_options, session_options FROM users WHERE username=(?) Multiple
displays may be specified as a comma separated list.
hosts checks the host using the system's tcp-wrappers library. (Posix only, and
not available on Mac OS) See hosts.allow and hosts.deny for details.
exec Executes the command specified using the command attribute, the arguments to
this command are: a description of the access request and the timeout value.
(also configurable) If the command is not specified, the system will try to
locate and use the auth_dialog utility which is shipped with xpra. The
command should return 0 to allow access, any other value will deny access.
peercred
checks the unix domain socket peer credentials using SO_PEERCRED. This
authentication module is only available on some Posix compliant operating
systems. This module will verify that the operating system provides the uid
and gid of the process that initiated the connection. Access can be
restricted by supplying a colon separated list of valid uids and gids that
are allowed to connect. Those id values may be specified using numerical
values or using the usernames / group names. This module is different from
the others in that it will not require the client to supply a username or
password, as those are ignored. Environment variables and pseudo-
environment variables may also be used as values, eg:
--auth=peercred:uid=\$UID:fred,gid=xpra.
pam validates the username and password using the PAM system
win32 validates the username and password using Microsoft Windows authentication
(only available on this platform)
sys chooses the appropriate system authentication module automatically (either
pam or win32)
kerberos-password
validates the username and password using kerberos authentication. Warning:
this module does not use kerberos tickets and the password will be sent in
plain text to the server. This should only be used for testing.
kerberos-ticket
validates a kerberos ticket obtained by the client.
gss validates a GSS ticket obtained by the client.
u2f requests a U2F token from the client.
ldap validates the username and password against an LDAP server, using the
python-ldap library.
ldap3 validates the username and password against an LDAP server, using the python
ldap3 library.
--tcp-auth=MODULE
Just like the auth switch, except this one only applies to TCP sockets (sockets
defined using the bind-tcp switch).
--udp-auth=MODULE
Just like the tcp-auth switch, except this one only applies to UDP sockets (sockets
defined using the bind-udp switch).
--ws-auth=MODULE
Just like the auth switch, except this one only applies to ws sockets: sockets
defined using the bind-ws switch, or TCP sockets upgraded to websockets. (if the
html option is enabled).
--wss-auth=MODULE
Just like the auth switch, except this one only applies to wss sockets: sockets
defined using the bind-wss switch, ws sockets upgraded to SSL (if the ssl option is
enabled) or TCP sockets upgraded to SSL and then to wss. (if both the ssl and html
options are enabled).
--ssl-auth=MODULE
Just like the auth switch, except this one only applies to SSL sockets: sockets
defined using the bind-ssl switch, or TCP sockets upgraded by ssl=auto or ssl=on.
--rfb-auth=MODULE
Authentication module to use for the bind-rfb sockets.
--vsock-auth=MODULE
Just like the auth switch, except this one only applies to VSOCK sockets (sockets
defined using the bind-vsock switch).
--challenge-handlers=MODULE:options
Configures which challenge handlers are used by the client and in which order. This
option may be repeated to specify multiple handlers, which can be useful if the
server sends more than one authentication challenge. The default value is: all
which corresponds to: uri,file,env,kerberos,gss,u2f,prompt.
uri Use the password specified on the connection string, if any.
file The filename used to store the password can be specified using the filename
option. If this option is not specified, it will fallback to using the
password filename specified with the password-file switch.
env Use the password specified using the environment variable specified using
the name option, which defaults to XPRA_PASSWORD if unspecified.
kerberos
Requests a kerberos token for the service specified.
gss Requests a gss token for the service specified.
u2f Requests a token from a U2F device.
prompt Prompt the user for the value. Terminal clients prompt using text input,
GUI clients use a dialog.
--min-port=PORT
The minimum port number allowed when creating UDP and TCP sockets. You can use a
lower value to allow unprivileged users to bind to privileged ports when starting
sessions via the system wide proxy server. The default value is 1024 which is the
standard value for privileged ports.
--mdns=yes|no
Enable or disable the publication of new sessions via mDNS.
--dbus-launch=COMMAND|no
Start the session within a dbus-launch context, you can specify the dbus launch
command to use, or turn it off completely. Some features may not be available
without a dbus context.
--dbus-proxy=yes|no
Allows the client to forward dbus calls to the server.
--dbus-control=yes|no
Start a dbus server which can be used to interact with the server process.
Options for start, start-desktop, upgrade
--exec-wrapper=CMD
A wrapper command which is prepended to all start commands. Typically, this is
used for starting all sub-commands via VirtualGL.
--start=CMD
After starting the server, runs the command CMD using the default shell. The
command is run with its $DISPLAY set to point to the newly-started server. This
option may be given multiple times to start multiple commands.
--start-child=CMD
Identical to --start, except that the commands are taken into account by --exit-
with-children.
--start-after-connect=CMD
Wait for the first client to connect before starting the command.
--start-child-after-connect=CMD
Wait for the first client to connect before starting the child command. See start-
child.
--start-on-connect=CMD
Execute this command every time a client connects.
--start-child-on-connect=CMD
Execute this child command every time a client connects. See start-child.
--start-on-last-client-exit=CMD
Execute this command every time a client disconnects and there are no other clients
left.
--start-child-on-last-client-exit=CMD
Execute this child command every time a client disconnects and there are no other
clients left. See start-child.
--terminate-children=yes|no
On server stop, terminate all the child commands that have been started by the
server. This does not affect server exit. Most child commands are tied to the
display so they are normally forced to shutdown anyway, but this gives them more
time to cleanup properly and can be used to stop background commands that aren't
tied to a display.
--exit-with-children=yes|no
This option may only be used if --start-child is also given. If it is given, then
the xpra server will monitor the status of the children started by --start-child,
and will automatically terminate itself when the last of them has exited.
--exit-with-client=yes|no
The server will terminate when the last client disconnects.
--env=KEY=VALUE
Extra environment variables which will only affect commands started using fB--start
or --start-child.
--start-new-commands=yes|no
Allow clients to ask the server to execute new commands. (this can also be used
via the control channel)
--start-via-proxy=yes|no|auto
If enabled, the start and start-desktop subcommands will be delegated to the system
wide proxy server instance. With auto mode, this delegation will only occur if the
system wide proxy server is found.
--systemd-run=yes|no|auto
Wrap server start commands with systemd-run.
--systemd-run-args=ARGS
Command line arguments passed to systemd-run.
--use-display
Use an existing display rather than starting one with xvfb. You are responsible
for starting the display yourself. This can also be used to rescue an existing
display whose xpra server instance crashed or for running xpra against an
accelerated X11 server.
--displayfd=FD
The xpra server will write the display number back on this file descriptor as a
newline-terminated string. This is most useful when the display number is not
specified with the xpra start or start-desktop subcommands.
--xvfb=CMD
When starting a seamless server, xpra starts a virtual X server to run the clients
on. If your Xvfb is installed in a funny location, or you want to use some other
virtual X server, then this switch allows you to specify how to run your preferred
X server executable. The default value used depends on your platform. For more
information, see: https://xpra.org/Xdummy.html
--sync-xvfb=DELAY
The windows are normally only displayed on the client(s), they are not painted on
the virtual display. Some applications like screen recorders may want to capture
the window contents, you can use this option to enable painting with a configurable
delay (in milliseconds). Warning: this extra painting is expensive and quite slow,
which is why it is not enabled by default.
--attach=yes|no|auto
Once the server has started, immediately connect a client to it. With the value
auto, a client is started for remote servers only. (servers specified via a network
URI)
Options for start, start-desktop, upgrade, shadow
--tcp-proxy=HOST:PORT
Specifies the address to which non-xpra packets will be forwarded. This can be
used to share the same TCP port with another TCP servers, usually a web server.
xpra clients will connect as usual, but any client that does not speak the xpra
protocol will be forwarded to the alternative server.
--html=on|off|auto|webrootpath
Respond to HTTP requests on the TCP port(s) and local sockets. This requires at
least one TCP or local socket to be configured using the matching bind option. The
auto mode will enable support if possible. By default the server will provide
access to the HTML5 client. You can also specify your own web root path as
argument.
--rfb-upgrade=DELAY
Allows RFB clients (ie: VNC) to connect to a plain TCP socket. If no data is
received after DELAY seconds, the server will send a RFB handshake. This option is
only applicable to servers started in start-desktop or shadow modes.
--video-encoders=ENCODERS
Specifies the video encoders to try to load. By default, all of them are loaded,
but one may want to specify a more restrictive list of encoders. Use the special
value 'help' to get a list of options. Use the value 'none' to not load any video
encoders.
--csc-modules=MODULES
Specifies the colourspace conversion modules to try to load. By default, all of
them are loaded, but one may want to specify a more restrictive list of modules.
Use the special value 'help' to get a list of options. Use the value 'none' to not
load any colourspace conversion modules.
--socket-permissions=ACCESS-MODE
Specifies the file permissions on the server's unix domain sockets. Defaults to
600. This is ignored when mmap-group is enabled.
Options for start, start-desktop, upgrade and attach
--encryption=CIPHER
Specifies the cipher to use for securing the connection from prying eyes. This
option requires the use of the --encryption-keyfile option. The only cipher
supported at present is AES, if the client requests encryption it will be used by
both the client and server for all communication after the initial password
verification, but only if the server supports this feature too. Note: this feature
has not been extensively reviewed and as it is it should not be considered safe
from determined attackers.
--tcp-encryption=CIPHER
Just like the encryption switch, except this one only applies to TCP sockets
(sockets defined using the bind-tcp switch).
--encryption-keyfile=FILENAME
Specifies the key to use with the encryption cipher specified with --encryption.
The client and server must use the same keyfile contents.
--tcp-encryption-keyfile=FILENAME
Just like the encryption-keyfile switch, except this one only applies to TCP
sockets (sockets defined using the bind-tcp switch).
--idle-timeout=IDLETIMEOUT
The connection will be terminated if there is no user activity (mouse clicks or key
presses) for the given amount of time (in seconds). Use the value 0 to disable this
timeout.
--server-idle-timeout=IDLETIMEOUT
The server will exit if there are no active connections for the given amount of
time (in seconds). Use the value 0 to disable this timeout.
--clipboard-filter-file=FILENAME
Name of a file containing regular expressions, any clipboard data that matches one
of these regular expressions will be dropped. Note: at present this only applies
to copying from the machine where this option is used, not to it.
--dpi=VALUE
The 'dots per inch' value that client applications should try to honour. This
numeric value should be in the range 10 to 500 to be useful. Many applications
will only read this value when starting up, so connecting to an existing session
started with a different DPI value may not have the desired effect.
--pixel-depth=VALUE
When starting a server, this switch controls the bits per pixel of the virtual
framebuffer. Possible values: 0 (auto), 16, 24, 30. When starting a client, this
switch controls the picture rendering with the opengl backend: values higher than
24 will enable deep color, the value 24 enables regular true color rendering. Use
the value 0 to let the client decide if the rendering will benefit from using deep
color. (this is only supported on some Posix clients) Other values should not be
used.
--cursors=yes|no
Enable or disable forwarding of custom application mouse cursors. Client
applications may change the mouse cursor at any time, which will cause the new
cursor's pixels to be sent to the client each time. This disables the feature.
--notifications=yes|no
Enable or disable forwarding of system notifications. System notifications require
the xpra server to have its own instance of a dbus daemon, if it is missing a
warning will be printed on startup. This switch disables the feature entirely, and
avoids the warning.
--input-method=METHOD
Specify which input method to configure. This sets a number of environment
variables which should be honoured by applications started with the start-child
option.
The following METHODs are currently supported:
none Disable input methods completely and prevent it from interfering with
keyboard input. This is the default.
keep Keeps the environment unchanged. You are responsible for ensuring it is
correct.
xim Enables the X Input Method.
IBus Enables the Intelligent Input Bus.
SCIM Enables the Smart Common Input Method.
uim Enables the Universal Input Method.
Any other value will also be set up, but will trigger a warning.
--xsettings=yes|no
Enable or disable xsettings synchronization. Xsettings are only forwarded from
posix clients connecting to real posix servers (not shadows).
--system-tray=yes|no
Enable or disable forwarding of system tray icons. This feature requires client
support and may not be available on all platforms.
--bell=yes|no
Enable or disable forwarding of the system bell.
--webcam=yes|no
Enable or disable webcam forwarding.
--mousewheel=on|off|invert|invert-x|invert-y|invert-z
Mouse wheel handling: can be used to disable mouse wheel forwarding or to invert
some or all axes.
--remote-logging=yes|no|both
Allow the client to forward its log output to the server. The client can specify
the value both to both send it to the server and keep it locally.
--av-sync=yes|no
Enable or disable audio-video synchronization. The video data will be delayed so
that it is displayed in sync with the audio. Note: this only applies to video
regions, either auto-detected via the builtin heuristics or specified using the
dbus interface.
Options for attach
--modal-windows=yes|no
Honour modal windows. This may have undesirable side effects when multiple
applications are forwarded through the same xpra server: modal windows will be made
modal for all the applications forwarded by xpra rather than just the one
application which owns that window.
--password-file=FILENAME
Supply the password to be used for connecting to a server that uses authentication.
See auth, tcp-auth, ssl-auth and vsock-auth for details. Alternatively, you may
use the XPRA_PASSWORD environment variable.
--opengl=(yes|no|auto)[:backend]
Use OpenGL accelerated rendering on the client. The default is to detect if the
graphics card and drivers are supported (auto mode), but one can also disable
OpenGL (no) or force it enabled (yes). On some platforms, it is also possible to
specify which backends should be used, only gtk and native are currently supported
and only on X11 platforms. ie: opengl=yes:native, or opengl=auto:gtk,native.
--webcam=yes|no|/dev/deviceXXX|DEVICEID
Enable or disable webcam forwarding. The webcam device to use can also be
specified.
-zLEVEL, --compress=LEVEL
Select the level of compression xpra will use when transmitting data over the
network. With the lz4 and lzo compressors, there are only two possible values: 0
(meaning no compression) and 1 (compression enabled). The zlib compressor supports
values between 0 (meaning no compression) and 9, inclusive. It should only be used
when lz4 and lzo are not available.
This compression is not used on pixel data (except when using the rgb encoding).
--quality=VALUE
This option sets a fixed image compression quality for lossy encodings (jpeg, webp,
h264/h265 and vp8/vp9). First, one of those lossy encodings must be enabled with
--encoding. Values range from 1 (lowest quality, high compression - generally
unusable) to 100 (highest quality, low compression). Specify a value of zero to
let the system tune the quality dynamically to achieve the best bandwidth usage
possible. It is usually best not to use this option and use min-quality instead.
--min-quality=MIN-QUALITY
This option sets the minimum encoding quality allowed when the quality option is
set to automatic mode.
--speed=SPEED
This option sets the encoding speed. Slower compresses more, faster will give
better latency. The system normally uses a variable speed, this option forces a
fixed speed setting to be used instead. It is usually best not to use this option
and use min-speed instead.
--min-speed=MIN-SPEED
This option sets the minimum encoding speed allowed when the speed option is set to
automatic mode.
--auto-refresh-delay=DELAY
This option sets a delay after which the windows are automatically refreshed using
a lossless frame. The delay is a floating-point number and is in seconds. This
option is enabled by default with a delay of 0.25 seconds. This option is only
relevant when using a lossy encoding.
--shortcut-modifiers=MODIFIERS
Defines the default shortcut modifiers required by the key-shortcuts, these
modifiers can then be referred to as #. The default value is 'auto' which
evaluates to Meta+Shift on most platforms.
--key-shortcut=KEY:ACTION
Can be specified multiple times to add multiple key shortcuts. These keys will be
caught by the client and trigger the action specified and the key presses will not
be passed on to the server.
The KEY specification may include keyboard modifiers in the form [modifier+]*key,
for example: Shift+F10 or Shift+Control+B. You can refer to the shorcut-modifers
option value using #, ie: #+F1.
If no shortcuts are defined on the command line, the default builtin list will be
used.
Some of the actions may allow arguments (ie: the log action does), in which case
they are specified in the usual programming style syntax: ACTION(ARG1, ARG2, etc)
String arguments must be quoted (both single and double quotes are supported) and
numeric arguments must not be quoted. Beware the the parenthesis and quotes must
usually be escaped when used from a shell command line. Example: --key-
shortcut=Meta+Shift+F7:log\(\'hello\'\)
The following ACTIONs are currently defined:
quit Disconnect the xpra client.
log("MESSAGE")
Sends MESSAGE to the log.
show_session_info[("TabName")]
Shows the session information window. The optional TabName allows the
information tab shown to be selected. Use the value help to get the list of
options.
show_menu
Shows the menu normally found in the system tray.
show_start_new_command
Shows the start new command dialog.
magic_key
Placeholder which can be used by some client toolkits.
void Does not do anything, and can therefore be used to prevent certain key
combinations from ever being sent to the server.
refresh_window
Force the currently focused window to be refreshed.
refresh_all_windows
Force all windows to be refreshed.
toggle_keyboard_grab
The keyboard will be grabbed / ungrabbed by the current window.
toggle_pointer_grab
The pointer will be grabbed and confined to the current window.
toggle_fullscreen
Make the current window fullscreen / unfullscreen.
toggle_debug
Turn debugging on or off.
scaleup
Increase the current value of desktop-scaling.
scaledown
Decrease the current value of desktop-scaling.
scalereset
Reset the desktop-scaling to its original value.
scalingoff
Turn off desktop-scaling.
increase_quality
Increase the min-quality or quality setting (whichever one is currently in
use).
decrease_quality
Decrease the min-quality or quality setting (whichever one is currently in
use).
increase_speed
Increase the min-speed or speed setting (whichever one is currently in use).
decrease_speed
Decrease the min-speed or speed setting (whichever one is currently in use).
--sharing=yes|no|auto
Sharing allows more than one client to connect to the same session. This must be
enabled on both the server and all co-operating clients to function. When used
server-side, the default value auto allows the clients to decide if they are
willing to share the session. When used client-side, the default value auto
evaluates to no. To allow sharing to work with unix domain sockets (either using
local connections or via ssh), you should create at least one socket in a group
accessible directory. On Posix with a default configuration, being a member of the
xpra group should be enough to create a socket in /run/xpra. You must also ensure
that the permissions of this socket file allow group access, see socket-
permissions.
--lock=yes|no|auto
Locking allows a client to refuse to hand over the session to a new client. The
session may still be shared with multiple clients (see the sharing option), but
otherwise the server will reject new clients. When used server-side, the default
value auto allows the clients to decide if they want to lock the session. When
used client-side, the default value auto evaluates to no.
--keyboard-sync=yes|no
Normally the key presses and key release events are sent to the server as they
occur so that the server can maintain a consistent keyboard state. Disabling
synchronization can prevent keys from repeating unexpectedly on high latency links
but it may also disrupt applications which access the keyboard directly (games,
etc.).
--keyboard-raw=yes|no
Tells the server to process all keyboard input untranslated. Both the client and
the server must be using the same type of keyboard interface. (ie: both using X11)
--keyboard-layout=LAYOUTSTRING
The keyboard layout is normally detected automatically. This option overrides it.
--keyboard-layouts=LAYOUTS
The list of keyboard layouts to enable.
--keyboard-variant=VARIANT
Override for the keyboard layout variant.
--keyboard-variants=VARIANTS
Override for the keyboard layout variants.
--keyboard-options=OPTIONS
Override for the keyboard options sent to the server.
--swap-keys=YES|NO
This option only applies to MacOS clients, it swaps the command and control keys
and is enabled by default.
--sound-source=PLUGIN
Specifies the GStreamer sound plugin used for capturing the sound stream. This
affects "speaker forwarding" on the server, and "microphone" forwarding on the
client. To get a list of options use the special value 'help'. It is also
possible to specify plugin options using the form: --sound-source= pulse
device=device.alsa_input.pci-0000_00_14.2.analog-stereo
--speaker=on|off|disabled and --microphone=on|off|disabled|on:DEVICE|off:DEVICE
Sound input and output forwarding support: on will start the forwarding as soon as
the connection is established, off will require the user to enable it via the menu,
disabled will prevent it from being used and the menu entry will be disabled. With
microphone forwarding, you may also be able to specify which device to use.
--speaker-codec=CODEC and --microphone-codec=CODEC
Specify the codec(s) to use for sound output (speaker) or input (microphone). This
parameter can be specified multiple times and the order in which the codecs are
specified defines the preferred codec order. Use the special value 'help' to get a
list of options. When unspecified, all the available codecs are allowed and the
first one is used.
--title=VALUE
Sets the text shown as window title. The string supplied can make use of remote
metadata placeholders which will be populated at runtime with the values from the
remote server. The default value used is "@title@ on @client-machine@".
The following placeholders are defined:
@title@
Will be replaced by the remote window's title.
@client-machine@
Will be replaced by the hostname of the system where the application is
running, if provided, the xpra server's hostname otherwise.
@server-machine@
Will be replaced by the hostname of the xpra server.
@server-display@
Will be replaced by the name of the display on which the application is
running.
--border=BORDER
Specifies the color and size of the border to draw inside every xpra window. This
can be used to easily distinguish xpra windows running on remote hosts from local
windows. The BORDER can be specified using standard color names (ie: red, or
orange) or using the web hexadecimal syntax (ie: #F00 or #FF8C00). The special
color name "auto" will derive the color from the server target address (the
connection string) so that connecting to the same target should always give the
same color. You may also specify the size of the border in pixels, ie:
--border=yellow,10.
--window-icon=FILENAME
Path to the default image which will be used for all windows. This icon may be
shown in the window's bar, its iconified state or task switchers. This depends on
the operating system, the window manage and the application may override this too.
--window-close=ACTION
Choose what action to take when the window is closed by the client. The following
actions can be used:
auto The client will figure out what is best based on the window type. This is
the default. ie: it will use disconnect shadow sessions, Iforward for
seamless windows.
forward
The event will be forwarded to the server.
ignore Do nothing.
disconnect
Disconnect from the server.
shutdown
Shutdown the server.
--desktop-scaling=off|on|auto|VALUE
Desktop scaling allows the windows to be scaled by the client. Downscaling will
mostly waste bandwidth, upscaling allows the window's pixels to be sent over the
wire at a lower resolution, saving bandwidth and CPU time. This option can also be
used to request a specific scaling value. For best results, use opengl client
rendering, the other display backends may show visual artifacts when scaling.
Note: the scaling may also be adjusted at runtime through keyboard shortcuts if
those are configured.
The desktop-scaling value can take the form:
off scaling will be disabled
on scaling will be allowed, but it will start unscaled
auto scaling will be allowed and a scaling value will be automatically chosen if
the client's desktop is large (bigger desktops will use higher scaling
values)
scaling-value
scaling will be enabled and use the given value, specified as a number,
fraction or percentage. ie: 2, 3/2 or 150%.
pair the scaling will be enabled and use a different value for the X and Y axis.
ie: 3x2 or 3/2x4/3
desktop-size
the scaling will be enabled and the server will render to the given size.
ie: 1600x1200
--tray=yes|no Enable or disable the system tray. Not available on OSX since the dock icon
is always shown.
--delay-tray
Waits for the first window or notification to appear before showing the system
tray. (posix only)
--tray-icon=FILENAME
Specifies the icon shown in the dock/tray. By default it uses a simple default
'xpra' icon. (On Microsoft Windows, the icon must be in ico format.)
--enable-pings
The client and server will exchange ping and echo packets which are used to gather
latency statistics. Those statistics can be seen using the xpra info command.
Options for attach, stop, info, screenshot, version
--ssh=CMD
When you use an ssh: address to connect to a remote display, xpra runs ssh(1) to
make the underlying connection. By default, it does this by running the command
"ssh". If your ssh program is in an unusual location, has an unusual name, or you
want to pass special options to change ssh's behavior, then you can use the --ssh
switch to tell xpra how to run ssh.
For example, if you want to use arcfour encryption, then you should run
xpra attach --ssh="ssh -c arcfour" ssh://frodo/7
Note: Don't bother to enable ssh compression; this is redundant with xpra's own
compression, and will just waste your CPU. See also xpra's --compress switch.
On MS Windows, where backslashes are used to separate path elements and where
spaces are often used as part of paths, you need to add quotes around paths. (ie:
ssh="C:\Program Files\Xpra\Plink.exe" -ssh -agent)
--exit-ssh=yes|no
Choose whether the SSH client process should be forcibly terminated when xpra
disconnects from the server. If you are using SSH connection sharing, you may want
to avoid stopping the SSH master process instance spawned by xpra as it may be used
by other SSH sessions. Note: the exit-ssh=no detaches the SSH process from the
terminal which prevents the SSH process from interacting with the terminal input,
this disables the keyboard interaction required for password input, host key
verification, etc..
--remote-xpra=CMD
When connecting to a remote server over ssh, xpra needs to be able to find and run
the xpra executable on the remote host. If this executable is in a non-standard
location, or requires special environment variables to be set before it can run,
then accomplishing this may be non-trivial. If running xpra attach ssh:something
fails because it cannot find the remote xpra, then you can use this option to
specify how to run xpra on the remote host.
That said, this option should not be needed in normal usage, as xpra tries quite
hard to work around the above problems. If you find yourself needing it often,
then that may indicate a bug that we would appreciate hearing about.
SSL Options
--ssl=on|auto|off|tcp|www
Whether to enable SSL on TCP sockets and for what purpose. The TCP sockets will
automatically be upgraded to SSL when SSL packets are received.
auto The server will try to guess what protocol to use for each new SSL
connection: either xpra's native protocol or https / websocket (wss)
tcp The SSL sockets will only be used for xpra's native protocol
www The SSL sockets will only be used for https and websocket (wss)
If SSL is enabled, then a ssl-cert is required. Authentication, if required, will use the
ssl-auth module specified, and fallback to tcp-auth or auth unless the value none is
specified.
The remaining options mirror the Python ssl module attributes. Please refer to that
documentation and bear in mind that configuring SSL for security is not trivial, and
definitely not just a matter of enabling SSL. See:
https://docs.python.org/2/library/ssl.html Some options may not be available with older
versions of Python.
Summary: --ssl-key=KEYFILE The key file to use.
--ssl-cert=ERTFILEORDIR
Certificate file, required for server SSL support.
--ssl-protocol=PROTOCOLVERSION
Specifies which version of the SSL protocol to use.
--ssl-ca-certs=CACERTSFILE
The ca_certs file contains a set of concatenated 'certification authority'
certificates. If a directory is specified, it should contain the certificates.
--ssl-ca-data=ERTDATA
Certificate data.
--ssl-ciphers=CIPHERS
Sets the available ciphers, it should be a string in the OpenSSL cipher list
format.
--ssl-client-verify-mode=none|optional|required
Whether to try to verify the client's certificates and how to behave if
verification fails.
--ssl-server-verify-mode=none|optional|required
Whether to try to verify the server's certificates and how to behave if
verification fails.
--ssl-verify-flags=FLAGS
The flags for certificate verification operations.
--ssl-check-hostname=yes|no
Whether to match the peer cert's hostname.
--ssl-options=options
Set of SSL options enabled on this context.
ENVIRONMENT
DISPLAY
xpra start --start-child=... sets this variable in the environment of the child to
point to the xpra display.
xpra attach, on the other hand, uses this variable to determine which display the
remote applications should be shown on.
fIXPRA_PASSWORD may be used with xpra attach instead of the password-file option.
FILES
xpra.conf stores default values for most options. There is a global configuration file in
/etc or /usr/local/etc, and each user may override those defaults by creating the file
.xpra/xpra.conf. You can also split the options into multiple files by placing them in a
conf.d directory with the .conf extension. Depending on OS and version, xpra uses the
directory ~/.xpra or /run/<uid>/xpra to store a number of files. (The examples below are
given for the display :7.)
~/.xpra/:7
The unix domain socket that clients use to contact the xpra server, if the system
configuration uses this directory.
~/.xpra/:7.log
When run in daemon mode (the default), the xpra server directs all output to this
file. This includes all debugging output, if debugging is enabled.
~/.xpra/run-xpra
A shell script that, when run, starts up xpra with the correct python interpreter,
PYTHONPATH, PATH, location of the main xpra script, etc. Automatically generated
by xpra initenv, xpra start and used by xpra attach (see also the discussion of
--remote-xpra).
BUGS
Xpra has no test suite.
Xpra does not fully handle all aspects of the X protocol; for instance, fancy input
features like pressure-sensitivity on tablets, some window manager hints, and probably
other more obscure parts of the X protocol. It does, however, degrade gracefully, and
patches for each feature would be gratefully accepted.
The xpra server allocates an over-large framebuffer when using Xvfb; this wastes memory.
If the Xvfb does not support RandR this can also cause applications to misbehave (e.g. by
letting menus go off-screen). This is not a problem when using Xdummy, see the --xvfb=
switch for details. Conversely, if the framebuffer is ever insufficiently large, clients
will misbehave in other ways (e.g., input events will be misdirected).
REPORTING BUGS
Send any questions or bugs reports to http://xpra.org/trac/
SEE ALSO
screen(1), winswitch_applet(1)
XPRA(1)