Provided by: manpages-dev_5.10-1ubuntu1_all 
NAME
rename, renameat, renameat2 - change the name or location of a file
SYNOPSIS
#include <stdio.h>
int rename(const char *oldpath, const char *newpath);
#include <fcntl.h> /* Definition of AT_* constants */
#include <stdio.h>
int renameat(int olddirfd, const char *oldpath,
int newdirfd, const char *newpath);
int renameat2(int olddirfd, const char *oldpath,
int newdirfd, const char *newpath, unsigned int flags);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
renameat():
Since glibc 2.10:
_POSIX_C_SOURCE >= 200809L
Before glibc 2.10:
_ATFILE_SOURCE
renameat2():
_GNU_SOURCE
DESCRIPTION
rename() renames a file, moving it between directories if required. Any other hard links to the file (as
created using link(2)) are unaffected. Open file descriptors for oldpath are also unaffected.
Various restrictions determine whether or not the rename operation succeeds: see ERRORS below.
If newpath already exists, it will be atomically replaced, so that there is no point at which another
process attempting to access newpath will find it missing. However, there will probably be a window in
which both oldpath and newpath refer to the file being renamed.
If oldpath and newpath are existing hard links referring to the same file, then rename() does nothing,
and returns a success status.
If newpath exists but the operation fails for some reason, rename() guarantees to leave an instance of
newpath in place.
oldpath can specify a directory. In this case, newpath must either not exist, or it must specify an
empty directory.
If oldpath refers to a symbolic link, the link is renamed; if newpath refers to a symbolic link, the link
will be overwritten.
renameat()
The renameat() system call operates in exactly the same way as rename(), except for the differences
described here.
If the pathname given in oldpath is relative, then it is interpreted relative to the directory referred
to by the file descriptor olddirfd (rather than relative to the current working directory of the calling
process, as is done by rename() for a relative pathname).
If oldpath is relative and olddirfd is the special value AT_FDCWD, then oldpath is interpreted relative
to the current working directory of the calling process (like rename()).
If oldpath is absolute, then olddirfd is ignored.
The interpretation of newpath is as for oldpath, except that a relative pathname is interpreted relative
to the directory referred to by the file descriptor newdirfd.
See openat(2) for an explanation of the need for renameat().
renameat2()
renameat2() has an additional flags argument. A renameat2() call with a zero flags argument is
equivalent to renameat().
The flags argument is a bit mask consisting of zero or more of the following flags:
RENAME_EXCHANGE
Atomically exchange oldpath and newpath. Both pathnames must exist but may be of different types
(e.g., one could be a non-empty directory and the other a symbolic link).
RENAME_NOREPLACE
Don't overwrite newpath of the rename. Return an error if newpath already exists.
RENAME_NOREPLACE can't be employed together with RENAME_EXCHANGE.
RENAME_NOREPLACE requires support from the underlying filesystem. Support for various filesystems
was added as follows:
* ext4 (Linux 3.15);
* btrfs, shmem, and cifs (Linux 3.17);
* xfs (Linux 4.0);
* Support for many other filesystems was added in Linux 4.9, including ext2, minix, reiserfs,
jfs, vfat, and bpf.
RENAME_WHITEOUT (since Linux 3.18)
This operation makes sense only for overlay/union filesystem implementations.
Specifying RENAME_WHITEOUT creates a "whiteout" object at the source of the rename at the same
time as performing the rename. The whole operation is atomic, so that if the rename succeeds then
the whiteout will also have been created.
A "whiteout" is an object that has special meaning in union/overlay filesystem constructs. In
these constructs, multiple layers exist and only the top one is ever modified. A whiteout on an
upper layer will effectively hide a matching file in the lower layer, making it appear as if the
file didn't exist.
When a file that exists on the lower layer is renamed, the file is first copied up (if not already
on the upper layer) and then renamed on the upper, read-write layer. At the same time, the source
file needs to be "whiteouted" (so that the version of the source file in the lower layer is
rendered invisible). The whole operation needs to be done atomically.
When not part of a union/overlay, the whiteout appears as a character device with a {0,0} device
number. (Note that other union/overlay implementations may employ different methods for storing
whiteout entries; specifically, BSD union mount employs a separate inode type, DT_WHT, which,
while supported by some filesystems available in Linux, such as CODA and XFS, is ignored by the
kernel's whiteout support code, as of Linux 4.19, at least.)
RENAME_WHITEOUT requires the same privileges as creating a device node (i.e., the CAP_MKNOD
capability).
RENAME_WHITEOUT can't be employed together with RENAME_EXCHANGE.
RENAME_WHITEOUT requires support from the underlying filesystem. Among the filesystems that
provide that support are tmpfs (since Linux 3.18), ext4 (since Linux 3.18), XFS (since Linux 4.1),
f2fs (since Linux 4.2), btrfs (since Linux 4.7), and ubifs (since Linux 4.9).
RETURN VALUE
On success, zero is returned. On error, -1 is returned, and errno is set appropriately.
ERRORS
EACCES Write permission is denied for the directory containing oldpath or newpath, or, search permission
is denied for one of the directories in the path prefix of oldpath or newpath, or oldpath is a
directory and does not allow write permission (needed to update the .. entry). (See also
path_resolution(7).)
EBUSY The rename fails because oldpath or newpath is a directory that is in use by some process (perhaps
as current working directory, or as root directory, or because it was open for reading) or is in
use by the system (for example as mount point), while the system considers this an error. (Note
that there is no requirement to return EBUSY in such cases—there is nothing wrong with doing the
rename anyway—but it is allowed to return EBUSY if the system cannot otherwise handle such
situations.)
EDQUOT The user's quota of disk blocks on the filesystem has been exhausted.
EFAULT oldpath or newpath points outside your accessible address space.
EINVAL The new pathname contained a path prefix of the old, or, more generally, an attempt was made to
make a directory a subdirectory of itself.
EISDIR newpath is an existing directory, but oldpath is not a directory.
ELOOP Too many symbolic links were encountered in resolving oldpath or newpath.
EMLINK oldpath already has the maximum number of links to it, or it was a directory and the directory
containing newpath has the maximum number of links.
ENAMETOOLONG
oldpath or newpath was too long.
ENOENT The link named by oldpath does not exist; or, a directory component in newpath does not exist; or,
oldpath or newpath is an empty string.
ENOMEM Insufficient kernel memory was available.
ENOSPC The device containing the file has no room for the new directory entry.
ENOTDIR
A component used as a directory in oldpath or newpath is not, in fact, a directory. Or, oldpath
is a directory, and newpath exists but is not a directory.
ENOTEMPTY or EEXIST
newpath is a nonempty directory, that is, contains entries other than "." and "..".
EPERM or EACCES
The directory containing oldpath has the sticky bit (S_ISVTX) set and the process's effective user
ID is neither the user ID of the file to be deleted nor that of the directory containing it, and
the process is not privileged (Linux: does not have the CAP_FOWNER capability); or newpath is an
existing file and the directory containing it has the sticky bit set and the process's effective
user ID is neither the user ID of the file to be replaced nor that of the directory containing it,
and the process is not privileged (Linux: does not have the CAP_FOWNER capability); or the
filesystem containing pathname does not support renaming of the type requested.
EROFS The file is on a read-only filesystem.
EXDEV oldpath and newpath are not on the same mounted filesystem. (Linux permits a filesystem to be
mounted at multiple points, but rename() does not work across different mount points, even if the
same filesystem is mounted on both.)
The following additional errors can occur for renameat() and renameat2():
EBADF olddirfd or newdirfd is not a valid file descriptor.
ENOTDIR
oldpath is relative and olddirfd is a file descriptor referring to a file other than a directory;
or similar for newpath and newdirfd
The following additional errors can occur for renameat2():
EEXIST flags contains RENAME_NOREPLACE and newpath already exists.
EINVAL An invalid flag was specified in flags.
EINVAL Both RENAME_NOREPLACE and RENAME_EXCHANGE were specified in flags.
EINVAL Both RENAME_WHITEOUT and RENAME_EXCHANGE were specified in flags.
EINVAL The filesystem does not support one of the flags in flags.
ENOENT flags contains RENAME_EXCHANGE and newpath does not exist.
EPERM RENAME_WHITEOUT was specified in flags, but the caller does not have the CAP_MKNOD capability.
VERSIONS
renameat() was added to Linux in kernel 2.6.16; library support was added to glibc in version 2.4.
renameat2() was added to Linux in kernel 3.15; library support was added in glibc 2.28.
CONFORMING TO
rename(): 4.3BSD, C89, C99, POSIX.1-2001, POSIX.1-2008.
renameat(): POSIX.1-2008.
renameat2() is Linux-specific.
NOTES
Glibc notes
On older kernels where renameat() is unavailable, the glibc wrapper function falls back to the use of
rename(). When oldpath and newpath are relative pathnames, glibc constructs pathnames based on the
symbolic links in /proc/self/fd that correspond to the olddirfd and newdirfd arguments.
BUGS
On NFS filesystems, you can not assume that if the operation failed, the file was not renamed. If the
server does the rename operation and then crashes, the retransmitted RPC which will be processed when the
server is up again causes a failure. The application is expected to deal with this. See link(2) for a
similar problem.
SEE ALSO
mv(1), rename(1), chmod(2), link(2), symlink(2), unlink(2), path_resolution(7), symlink(7)
COLOPHON
This page is part of release 5.10 of the Linux man-pages project. A description of the project,
information about reporting bugs, and the latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.