NAME

     snd_es137x — Ensoniq AudioPCI ES137x bridge device driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

           device sound
           device snd_es137x

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

           snd_es137x_load="YES"

DESCRIPTION

     The snd_es137x bridge driver allows the generic audio driver sound(4) to attach to the Ensoniq 137x audio
     cards.

   Runtime Configuration
     The following sysctl(8) variables are available in addition to those available to all sound(4) devices:

           hw.snd.pcm%d.latency_timer  Controls the PCI latency timer setting.  Increasing this value will solve
                                       most popping and crackling issues (especially on VIA motherboards).

           hw.snd.pcm%d.spdif_enabled  Enables S/PDIF output on the primary playback channel.  This sysctl(8)
                                       variable is available only if the device is known to support S/PDIF
                                       output.

           dev.pcm.%d.polling          Experimental polling mode, where the driver operates by querying the
                                       device state on each tick using callout(9).  Polling is disabled by
                                       default.  Do not enable it unless you are facing weird interrupt problems
                                       or if the device cannot generate interrupts at all.

HARDWARE

     The snd_es137x driver supports the following sound cards:

     •   Creative CT5880-A
     •   Creative CT5880-C
     •   Creative CT5880-D
     •   Creative CT5880-E
     •   Creative SB AudioPCI CT4730
     •   Ensoniq AudioPCI ES1370
     •   Ensoniq AudioPCI ES1371-A
     •   Ensoniq AudioPCI ES1371-B
     •   Ensoniq AudioPCI ES1373-A
     •   Ensoniq AudioPCI ES1373-B
     •   Ensoniq AudioPCI ES1373-8

SEE ALSO

     sound(4)

HISTORY

     The snd_es137x device driver first appeared in FreeBSD 4.0.

AUTHORS

     Russell Cattelan <cattelan@thebarn.com>
     Cameron Grant <cg@FreeBSD.org>
     Joachim Kuebart
     Jonathan Noack <noackjr@alumni.rice.edu>