Ubuntu Manpage: mailfilterrc - Mailfilter configuration file

Provided by: mailfilter_0.8.7-1build1_amd64

NAME

       mailfilterrc - Mailfilter configuration file

SYNOPSIS

       $HOME/.mailfilterrc

DESCRIPTION

       For a quick start read the INSTALL file provided with the Mailfilter distribution and copy
       its example configuration. This is enough to run the program with some basic features.

       Generally the rcfile contains all of Mailfilter's settings and  information  on  the  mail
       accounts  that should be checked for spam. It is possible to place remarks in that file by
       beginning a line with `#'.

       It does not matter in which order keywords are inserted, except for the account set-up. To
       define an account you must use this whole block of commands:

              SERVER = "your.pop.server.com"
              USER = "your.username"
              PASS = "your.password"
              PROTOCOL = "pop3"
              PORT = 110

       Currently  Mailfilter supports the POP3, and APOP protocols which usually communicate over
       port 110.  However, port 995 is required, if Mailfilter is instructed to communicate using
       the SSL layer as in:

              SERVER = "your.pop.ssl.server.com"
              USER = "your.username"
              PASS = "your.password"
              PROTOCOL = "pop3/ssl"
              PORT = 995

KEYWORDS

Generally the rcfile is not case-sensitive, which means it does not matter whether the
keywords are spelled in capitals or not. You can place white space characters before and
in between a command and its parameters.

# This is a typical comment
DENY = "^Subject:.*Get rich fast"

To see some example applications of the engaged keywords, please refer to the
mailfilterex(5) man page.

ALLOW = "expression"
This keyword can be used to override spam filters i.e. to define `friends'. A
message that matches any ALLOW rules will not be filtered or deleted. ALLOW takes a
Regular Expression as argument.

DEL_DUPLICATES = "[yes|no]"
This keyword can be used to delete duplicates of messages sent to one or several
accounts at once, i.e. it removes redundant e-mails. DEL_DUPLICATES takes either
`yes' or `no' as argument. The default value is `no'.

DENY = "expression"
This keyword can be used to define spam filters. Messages that match spam filters
(unless they match an ALLOW rule at the same time) are being deleted from the mail
server. DENY takes a Regular Expression as argument.

DENY <> "expression"
This keyword can be used to define a negative spam filter. Messages that do not
match the negative filters are being deleted from the server. DENY<> takes a
Regular Expression as argument, e.g. `DENY<>^To:.*my_username'.

DENY_CASE = "expression"
This keyword can be used to define case-sensitive spam filters. It overrides the
default settings for case-sensivity (see REG_CASE for details). DENY_CASE takes a
Regular Expression as argument.

DENY_CASE <> "expression"
This keyword can be used to define negative case-sensitive spam filters. It
overrides the default settings for case-sensivity (see REG_CASE for details).
DENY_CASE<> takes a Regular Expression as argument.

DENY_NOCASE = "expression"
This keyword can be used to define case-insensitive spam filters. It overrides the
default settings for case-sensivity (see REG_CASE for details). DENY_NOCASE takes a
Regular Expression as argument.

DENY_NOCASE <> "expression"
This keyword can be used to define negative case-insensitive spam filters. It
overrides the default settings for case-sensivity (see REG_CASE for details).
DENY_NOCASE<> takes a Regular Expression as argument.

HIGHSCORE = value
This keyword can be used to define a discrete threshold upon which messages should
be deleted. Individual scores are accumulated by assigning values and filters with
the SCORE or MAXSIZE_SCORE keywords. Its default value is 100.

INCLUDE = "path"
This keyword can be used to include additional configuration files into the main
Mailfilter rcfile. That is, the program settings may be conveniently split into
several different files. INCLUDE expects a path and file name as argument.

LOGFILE = "path"
This keyword can be used to define a log file for Mailfilter. The log file is being
used to store error messages and information on deleted messages. LOGFILE expects a
path and file name as argument.

MAXLENGTH = value
This keyword can be used to define a maximum string length that must not be
exceeded by any field of a message header. The according Internet standard RFC 822
suggests a limit of 998 characters per field. This option even overrides any
`friendly' ALLOW rules, i.e. deletes them if they exceed the limit. Assigning a `0'
disables the feature.

MAXSIZE_ALLOW = value
This keyword can be used to define a maximum message size that must not be exceeded
by all messages that match any ALLOW rule. (One could say, this is the size limit
`friends' should not exceed.) The limit does not affect other messages. To define a
more general message size limit, use MAXSIZE_DENY instead. MAXSIZE_ALLOW takes the
number of bytes as argument. Assigning a `0' disables this feature.

MAXSIZE_DENY = value
This keyword can be used to define a general message size limit that must not be
exceeded. (Unless the incoming message matches an ALLOW rule. In that case
MAXSIZE_ALLOW would apply.) MAXSIZE_DENY takes the number of bytes as argument.
Assigning a `0' disables this feature.

MAXSIZE_SCORE value = value
This keyword can be used to attach a score to a size limit. If that limit is
exceeded, then the score will be added to the accumulated score from applying other
scored filters (see the SCORE keyword below). The first value (before `=') is the
score, the second value (after `=') is the size limit. Assigning a `0' to either
the score or the size limit disables this feature.

NORMAL = "[yes|no]"
This keyword tells Mailfilter to `normalise' the subject strings in messages. A
normalised string consists only of alpha-numeric characters. When normalisation is
turned on, Mailfilter tries to apply its filters first to the original subject
line, before it tries to match the normalised one. NORMAL takes either `yes' or
`no' as argument. The default value is `no'.

REG_CASE = "[yes|no]"
This keyword can be used to define how Mailfilter should treat its Regular
Expressions, case-sensitive or case-insensitive. REG_CASE takes either `yes' as
argument to enable case-sensivity or otherwise `no' to disable it. The default
behaviour is to ignore the case.

REG_TYPE = "[basic|extended]"
This keyword can be used to define which type of Regular Expression Mailfilter
should use. REG_TYPE can either be switched to `extended' or `basic'. The default
value is `basic'.

SCORE value = "expression"
This keyword can be used to assign a score to a filter. It expects a discrete
number and a Regular Expression filter as input. If the filter matches a line of
the message header, the score is being accumulated to previously matched filters.
(See mailfilterex (5) for an example.)

SCORE value <> "expression"
This keyword can be used in the same fashion as SCORE, but it assigns the score
only if the filter can not be matched to any line of the message header.

SCORE_CASE value = "expression"
This keyword is similar to SCORE, but it treats the Regular Expression as case
sensitive filter, regardless of other program settings.

SCORE_CASE value <> "expression"
This keyword can be used in the same fashion as SCORE_CASE, but it assigns the
score only if the filter can not be matched to any line of the message header.

SCORE_NOCASE value = "expression"
This keyword is similar to SCORE, but it treats the Regular Expression as case
insensitive filter, regardless of other program settings.

SCORE_NOCASE value <> "expression"
This keyword can be used in the same fashion as SCORE_NOCASE, but it assigns the
score only if the filter can not be matched to any line of the message header.

SERVER / USER / PASS / PROTOCOL / PORT
These keywords can only be used as a whole and in the given order. Such a block
defines an e-mail account to be checked for spam by Mailfilter. A typical block
looks like this:

SERVER = "your.pop.server.com"
USER = "your.username"
PASS = "your.password"
PROTOCOL = "protocol"
PORT = 110

It is especially important to not change the arrangement of this block. At the
moment, PROTOCOL supports either `pop3' (`pop3/ssl'), or `apop' (`apop/ssl'). The
normal variant usually corresponds to port 110, while encrypted communication via
SSL, typically, requires port 995.

SHOW_HEADERS = "path"
This keyword can be used to store the message headers of absolutely all filtered e-
mails of an account. SHOW_HEADERS expects a path and a file name as argument
indicating where to store the headers in.

TEST = "[yes|no]"
This keyword prevents Mailfilter from deleting any messages on any e-mail accounts.
It is useful to experiment with filters and Regular Expressions and to see how
Mailfilter reacts to the user's changes. The option can be turned on by assigning
`yes' to TEST. The default value is `no'.

TIMEOUT = value
This keyword can be used to define a server response time out in seconds. That is,
the mail server has to respond to an issued command within a given time span,
otherwise Mailfilter will drop the connection and issue an error. TIMEOUT takes an
integer value as argument. The default is set to 30 (seconds).

VERBOSE = value
This keyword can be used to define the level of verbosity. It takes an integer as
argument.

0 Silent, show nothing at all

1 Only show errors

2 Only show "Deleted..." messages and errors

3 Default; Show "Deleted..." messages, errors and "Examining..." messages

4 Like (3), except this also shows the current account's username

5 Like (4), except this also shows which filter matched which string of an e-
mail header

6 Debugging mode; prints out almost everything

DEPRECATED KEYWORDS

       There are a few keywords from older versions of Mailfilter that are not supported anymore.
       The following list contains all these keywords and recommends substitutes.

       ICASE  Use REG_CASE instead.

       MAXSIZE
              Use MAXSIZE_ALLOW and MAXSIZE_DENY instead.

       MODE   Use VERBOSE instead.

       Even though Mailfilter still `silently' supports some of these words, you can not rely  on
       that for future versions. It is highly recommended to update old configuration files.

COPYRIGHT