Provided by: mimedefang_2.84-4build3_amd64 
NAME
mimedefang-filter - Configuration file for MIMEDefang mail filter.
DESCRIPTION
mimedefang-filter is a Perl fragment that controls how mimedefang.pl disposes of various
parts of a MIME message. In addition, it contains some global variable settings that
affect the operation of mimedefang.pl.
CALLING SEQUENCE
Incoming messages are scanned as follows:
1) A temporary working directory is created. It is made the current working directory and
the e-mail message is split into parts in this directory. Each part is represented
internally as an instance of MIME::Entity.
2) If the file /etc/mail/mimedefang-filter.pl defines a Perl function called filter_begin,
it is called with a single argument consisting of a MIME::Entity representing the parsed
e-mail message. Any return value is ignored.
3) For each leaf part of the mail message, filter is called with four arguments: entity, a
MIME::Entity object; fname, the suggested filename taken from the MIME Content-Disposition
header; ext, the file extension, and type, the MIME Content-Type value. For each non-leaf
part of the mail message, filter_multipart is called with the same four arguments as
filter. A non-leaf part of a message is a part that contains nested parts. Such a part
has no useful body, but you should still perform filename checks to check for viruses that
use malformed MIME to masquerade as non-leaf parts (like message/rfc822). In general, any
action you perform in filter_multipart applies to the part itself and any contained parts.
Note that both filter and filter_multipart are optional. If you do not define them, a
default function that simply accepts each part is used.
4) After all parts have been processed, the function filter_end is called if it has been
defined. It is passed a single argument consisting of the (possibly modified)
MIME::Entity object representing the message about to be delivered. Within filter_end,
you can call functions that modify the message headers body.
5) After filter_end returns, the function filter_wrapup is called if it has been defined.
It is passed a single argument consisting of the (possibly modified) MIME::Entity object
representing the message about to be delivered, including any modifications made in
filter_end. Within filter_wrapup, you can not call functions that modify the message
body, but you can still add or modify message headers.
DISPOSITION
mimedefang.pl examines each part of the MIME message and chooses a disposition for that
part. (A disposition is selected by calling one of the following functions from filter
and then immediately returning.) Available dispositions are:
action_accept
The part is passed through unchanged. If no disposition function is returned, this
is the default.
action_accept_with_warning
The part is passed through unchanged, but a warning is added to the mail message.
action_drop
The part is deleted without any notification to the recipients.
action_drop_with_warning
The part is deleted and a warning is added to the mail message.
action_replace_with_warning
The part is deleted and instead replaced with a text message.
action_quarantine
The part is deleted and a warning is added to the mail message. In addition, a
copy of the part is saved on the mail server in the directory /var/spool/MIMEDefang
and a notification is sent to the MIMEDefang administrator.
action_bounce
The entire e-mail message is rejected and an error returned to the sender. The
intended recipients are not notified. Note that in spite of the name, MIMEDefang
does not generate and e-mail a failure notification. Rather, it causes the SMTP
server to return a 5XX SMTP failure code.
action_discard
The entire e-mail message is discarded silently. Neither the sender nor the
intended recipients are notified.
CONTROLLING RELAYING
You can define a function called filter_relay in your filter. This lets you reject SMTP
connection attempts early on in the SMTP dialog, rather than waiting until the whole
message has been sent. Note that for this check to take place, you must use the -r flag
with mimedefang.
filter_relay is passed five arguments: $hostip is the IP address of the relay host (for
example, "127.0.0.1"), $hostname is the host name if known (for example,
"localhost.localdomain"). If the host name could not be determined, $hostname is $hostip
enclosed in square brackets. (That is, ("$hostname" eq "[$hostip]") will be true.)
The remaining three arguments to filter_relay are $port, $myip and $myport which contain
the client's TCP port, the Sendmail daemon's listening IP address and the Sendmail
daemon's listening port.
filter_relay must return a two-element list: ($code, $msg). $msg specifies the text
message to use for the SMTP reply, but because of limitations in the Milter API, this
message is for documentation purposes only---you cannot set the text of the SMTP message
returned to the SMTP client from filter_relay.
$code is a literal string, and can have one of the following values:
'REJECT'
if the connection should be rejected.
'CONTINUE'
if the connection should be accepted.
'TEMPFAIL'
if a temporary failure code should be returned.
'DISCARD'
if the message should be accepted and silently discarded.
'ACCEPT_AND_NO_MORE_FILTERING'
if the connection should be accepted and no further filtering done.
Earlier versions of MIMEDefang used -1 for TEMPFAIL, 0 for REJECT and 1 for CONTINUE.
These values still work, but are deprecated.
In the case of REJECT or TEMPFAIL, $msg specifies the text part of the SMTP reply. $msg
must not contain newlines.
For example, if you wish to reject connection attempts from any machine in the spammer.com
domain, you could use this function:
sub filter_relay {
my ($ip, $name) = @_;
if ($name =~ /spammer\.com$/) {
return ('REJECT', "Sorry; spammer.com is blacklisted");
}
return ('CONTINUE', "ok");
}
FILTERING BY HELO
You can define a function called filter_helo in your filter. This lets you reject
connections after the HELO/EHLO SMTP command. Note that for this function to be called,
you must use the -H flag with mimedefang.
filter_helo is passed six arguments: $ip and $name are the IP address and name of the
sending relay, as in filter_relay. The third argument, $helo, is the argument supplied in
the HELO/EHLO command.
The remaining three arguments to filter_relay are $port, $myip and $myport which contain
the client's TCP port, the Sendmail daemon's listening IP address and the Sendmail
daemon's listening port.
filter_helo must return a two-to-five element list: ($code, $msg, $smtp_code, $smtp_dsn,
$delay). $code is a return code, with the same meaning as the $code return from
filter_relay. $msg specifies the text message to use for the SMTP reply. If $smtp_code
and $smtp_dsn are supplied, they become the SMTP numerical reply code and the enhanced
status delivery code (DSN code). If they are not supplied, sensible defaults are used.
$delay specifies a delay in seconds; the C milter code will sleep for $delay seconds
before returning the reply to Sendmail. $delay defaults to zero.
(Note that the delay is implemented in the Milter C code; if you specify a delay of 30
seconds, that doesn't mean a Perl worker is tied up for the duration of the delay. The
delay only costs one Milter thread.)
FILTERING BY SENDER
You can define a function called filter_sender in your filter. This lets you reject
messages from certain senders, rather than waiting until the whole message has been sent.
Note that for this check to take place, you must use the -s flag with mimedefang.
filter_sender is passed four arguments: $sender is the envelope e-mail address of the
sender (for example, "<dfs@roaringpenguin.com>"). The address may or may not be
surrounded by angle brackets. $ip and $name are the IP address and host name of the SMTP
relay. Finally, $helo is the argument to the SMTP "HELO" command.
Inside filter_sender, you can access any ESMTP arguments (such as "SIZE=12345") in the
array @ESMTPArgs. Each ESMTP argument occupies one array element.
filter_sender must return a two-to-five element list, with the same meaning as the return
value from filter_helo.
For example, if you wish to reject messages from spammer@badguy.com, you could use this
function:
sub filter_sender {
my ($sender, $ip, $hostname, $helo) = @_;
if ($sender =~ /^<?spammer\@badguy\.com>?$/i) {
return ('REJECT', 'Sorry; spammer@badguy.com is blacklisted.');
}
return ('CONTINUE', "ok");
}
As another example, some spammers identify their own machine as your machine in the SMTP
"HELO" command. This function rejects a machine claiming to be in the
"roaringpenguin.com" domain unless it really is a Roaring Penguin machine:
sub filter_sender {
my($sender, $ip, $hostname, $helo) = @_;
if ($helo =~ /roaringpenguin.com/i) {
if ($ip ne "127.0.0.1" and
$ip ne "216.191.236.23" and
$ip ne "216.191.236.30") {
return('REJECT', "Go away... $ip is not in roaringpenguin.com");
}
}
return ('CONTINUE', "ok");
}
As a third example, you may wish to prevent spoofs by requiring SMTP authentication when
email is sent from some email addresses. This function rejects mail from
"king@example.com", unless the connecting user properly authenticated as "elvisp". Note
that this needs access to the %SendmailMacros global, that is not available in
filter_sender until after a call to read_commands_file.
sub filter_sender {
my($sender, $ip, $hostname, $helo) = @_;
read_commands_file();
### notice: This assumes The King uses authentication without realm!
if ($sender =~ /^<?king\@example\.com>?$/i and
$SendmailMacros{auth_authen} ne "elvisp") {
return('REJECT', "Faking mail from the king is not allowed.");
}
return ('CONTINUE', "ok");
}
FILTERING BY RECIPIENT
You can define a function called filter_recipient in your filter. This lets you reject
messages to certain recipients, rather than waiting until the whole message has been sent.
Note that for this check to take place, you must use the -t flag with mimedefang.
filter_recipient is passed nine arguments: $recipient is the envelope address of the
recipient and $sender is the envelope e-mail address of the sender (for example,
"<dfs@roaringpenguin.com>"). The addresses may or may not be surrounded by angle
brackets. $ip and $name are the IP address and host name of the SMTP relay. $first is
the envelope address of the first recipient for this message, and $helo is the argument to
the SMTP "HELO" command. The last three arguments, $rcpt_mailer, $rcpt_host and
$rcpt_addr are the Sendmail mailer, host and address triple for the recipient address.
For example, for local recipients, $rcpt_mailer is likely to be "local", while for remote
recipients, it is likely to be "esmtp".
Inside filter_recipient, you can access any ESMTP arguments (such as "NOTIFY=never") in
the array @ESMTPArgs. Each ESMTP argument occupies one array element.
filter_recipient must return a two-to-five element list whose interpretation is the same
as for filter_sender. Note, however, that if filter_recipient returns 'DISCARD', then the
entire message for all recipients is discarded. (It doesn't really make sense, but that's
how Milter works.)
For example, if you wish to reject messages from spammer@badguy.com, unless they are to
postmaster@mydomain.com, you could use this function:
sub filter_recipient {
my ($recipient, $sender, $ip, $hostname, $first, $helo,
$rcpt_mailer, $rcpt_host, $rcpt_addr) = @_;
if ($sender =~ /^<?spammer\@badguy\.com>?$/i) {
if ($recipient =~ /^<?postmaster\@mydomain\.com>?$/i) {
return ('CONTINUE', "ok");
}
return ('REJECT', 'Sorry; spammer@badguy.com is blacklisted.');
}
return ('CONTINUE', "ok");
}
INITIALIZATION AND CLEANUP
Just before a worker begins processing messages, mimedefang.pl calls the functions
filter_initialize (if it is defined) with no arguments. By the time filter_initialize is
called, all the other initialization (such as setting up syslog facility and priority) has
been done.
If you are not using an embedded Perl interpreter, then performing an action inside
filter_initialize is practically the same as performing it directly in the filter file,
outside any function definition. However, if you are using an embedded Perl interpreter,
then anything you call directly from outside a function definition is executed once only
in the parent process. Anything in filter_initialize is executed once per worker. If you
use any code that opens a descriptor (for example, a connection to a database server), you
must run that code inside filter_initialize and not directly from the filter, because the
multiplexor closes all open descriptors when it activates a new worker.
When a worker is about to exit, mimedefang.pl calls the function filter_cleanup (if it is
defined) with no arguments. This function can do whatever cleanup you like, such as
closing file descriptors and cleaning up long-lived worker resources. The return value
from filter_cleanup becomes the worker's exit status. (You should therefore ensure that
filter_cleanup returns an integer suitable for a process exit status.)
If filter_cleanup takes longer than 10 seconds to run, the worker is sent a SIGTERM
signal. If that doesn't kill it (because you're catching signals, perhaps), then a
further 10 seconds later, the worker is sent a SIGKILL signal.
CONTROLLING PARSING
If you define a function called filter_create_parser taking no arguments, then
mimedefang.pl will call it to create a MIME::Parser object for parsing mail messages.
Filter_create_parser is expected to return a MIME::Parser object (or an instance of a
class derived from MIME::Parser).
You can use filter_create_parser to change the behavior of the MIME::Parser used by
mimedefang.pl.
If you do not define a filter_create_parser function, then a built-in version equivalent
to this is used:
sub filter_create_parser () {
my $parser = MIME::Parser->new();
$parser->extract_nested_messages(1);
$parser->extract_uuencode(1);
$parser->output_to_core(0);
$parser->tmp_to_core(0);
return $parser;
}
EXTENDING MIMEDEFANG
The man page for mimedefang-protocol(7) lists commands that are passed to workers in
server mode (see "SERVER COMMANDS".) You can define a function called filter_unknown_cmd
to extend the set of commands your filter can handle.
If you define filter_unknown_cmd, it is passed the unknown command as a single argument.
It should return a list of values as follows: The first element of the list must be
either "ok" or "error:" (with the colon.) The remaining arguments are percent-encoded.
All the resulting pieces are joined together with a single space between them, and the
resulting string passed back as the reply to the multiplexor.
For example, the following function will make your filter reply to a "PING" command with
"PONG":
sub filter_unknown_cmd ($) {
my($cmd) = @_;
if ($cmd eq "PING") {
return("ok", "PONG");
}
return("error:", "Unknown command");
}
You can test this filter by typing the following as root:
md-mx-ctrl PING
The response should be:
ok PONG
If you extend the set of commands using filter_unknown_cmd, you should make all your
commands start with an upper-case letter to avoid clashes with future built-in commands.
REJECTING UNKNOWN USERS EARLY
A very common mail setup is to have a MIMEDefang machine act as an SMTP proxy, accepting
and scanning mail and then relaying it to the real mail server. Unfortunately, this means
that the MIMEDefang machine cannot know if a local address is valid or not, and will
forward all mail for the appropriate domains. If a mail comes in for an unknown user, the
MIMEDefang machine will be forced to generate a bounce message when it tries to relay the
mail.
It's often desirable to have the MIMEDefang host reply with a "User unknown" SMTP response
directly. While this can be done by copying the list of local users to the MIMEDefang
machine, MIMEDefang has a built-in function called md_check_against_smtp_server for
querying another relay host:
md_check_against_smtp_server($sender, $recip, $helo, $server, $port) This
function connects to the SMTP server $server and pretends to send mail from $sender
to $recip. The return value is always a two-element array. If the RCPT TO:
command succeeds, the return value is ("CONTINUE", "OK"). If the RCPT fails with a
permanent failure, the return value is ("REJECT", $msg), where $msg is the message
from the SMTP server. Any temporary failures, connection errors, etc. result in a
return value of ("TEMPFAIL", $msg).
The optional argument $port specifies the TCP port to connect to. If it is not
supplied, then the default SMTP port of 25 is used.
Suppose the machine filter.domain.tld is filtering mail destined for the real mail server
mail.domain.tld. You could have a filter_recipient function like this:
sub filter_recipient
{
my($recip, $sender, $ip, $host, $first, $helo,
$rcpt_mailer, $rcpt_host, $rcpt_addr) = @_;
return md_check_against_smtp_server($sender, $recip,
"filter.domain.tld",
"mail.domain.tld");
}
For each RCPT TO: command, MIMEDefang opens an SMTP connection to mail.domain.tld and
checks if the command would succeed.
Please note that you should only use md_check_against_smtp_server if your mail server
responds with a failure code for nonexistent users at the RCPT TO: level. Also, this
function may impose too much overhead if you receive a lot of e-mail, and it will generate
lots of useless log entries on the real mail server (because of all the RCPT TO: probes.)
It may also significantly increase the load on the real mail server.
GLOBAL VARIABLES YOU CAN SET
The following Perl global variables should be set in mimedefang-filter:
$AdminAddress
The e-mail address of the MIMEDefang administrator.
$DaemonAddress
The e-mail address from which MIMEDefang-originated notifications come.
$AddWarningsInline
If this variable is set to 0, then all MIMEDefang warnings (such as created by
action_quarantine or action_drop_with_warning) are collected together and added in
a separate MIME part called WARNING.TXT. If the variable is set to 1, then the
warnings are added directly in the first text/plain and text/html parts of the
message. If the message does not contain any text/plain or text/html parts, then a
WARNING.TXT MIME part is added as before.
$MaxMIMEParts
A message containing many MIME parts can cause MIME::Tools to consume large amounts
of memory and bring your system to its knees. If you set $MaxMIMEParts to a
positive number, then MIME parsing is terminated for messages with more than that
many parts, and the message is bounced. In this case, none of your filter
functions is called.
By default, $MaxMIMEParts is set to -1, meaning there is no limit on the number of
parts in a message. Note that in order to use this variable, you must install the
Roaring Penguin patched version of MIME::Tools, version 5.411a-RP-Patched-02 or
newer.
$Stupidity{"NoMultipleInlines"}
Set this to 1 if your e-mail is too stupid to display multiple MIME parts in-line.
In this case, a nasty hack causes the first part of the original message to appear
as an attachment if warning are issued. Mail clients that are not this stupid are
Netscape Communicator and Pine. On the other hand, Microsoft Exchange and
Microsoft Outlook are indeed this stupid. Perhaps users of those clients should
switch.
The following global variables may optionally be set. If they are not set,
sensible defaults are used:
$AddApparentlyToForSpamAssassin
By default, MIMEDefang tries to pass SpamAssassin a message that looks exactly like
one it would receive via procmail. This means adding a Received: header, adding a
Message-ID header if necessary, and adding a Return-Path: header. If you set
$AddApparentlyToForSpamAssassin to 1, then MIMEDefang also adds an Apparently-To:
header with all the envelope recipients before passing the message to SpamAssassin.
This lets SpamAssassin detect possibly whitelisted recipient addresses.
The default value for $AddApparentlyToForSpamAssassin is 0.
$SyslogFacility
This specifies the logging facility used by mimedefang.pl. By default, it is set
to "mail", but you can set it to other possibilites. See the openlog(3) man page
for details. You should name facilities as all-lowercase without the leading
"LOG_". That is, use "local3", not "LOG_LOCAL3".
$WarningLocation (default 0)
If set to 0 (the default), non-inline warnings are placed first. If you want the
warning at the end of the e-mail, set $WarningLocation to -1.
$DaemonName (default "MIMEDefang")
The full name used when MIMEDefang sends out notifications.
$AdminName (default "MIMEDefang Administrator")
The full name of the MIMEDefang administrator.
$SALocalTestsOnly (default 1)
If set to 1, SpamAssassin calls will use only local tests. This is the default and
recommended setting. This disables Received, RBL and Razor tests in an all or
nothing fashion. To use Razor this MUST be set to 0. You can add 'skip_rbl_checks
1' to your SpamAssassin config file if you need to.
$NotifySenderSubject (default "MIMEDefang Notification")
The subject used when e-mail is sent out by action_notify_sender(). If you set
this, you should set it each time you call action_notify_sender() to ensure
consistency.
$NotifyAdministratorSubject (default "MIMEDefang Notification")
The subject used when e-mail is sent out by action_notify_administrator(). If you
set this, you should set it each time you call action_notify_administrator() to
ensure consistency.
$QuarantineSubject (default "MIMEDefang Quarantine Report")
The subject used when a quarantine notice is sent to the administrator. If you set
this, you should set it each time you call action_quarantine() or
action_quarantine_entire_message().
$NotifyNoPreamble (default 0)
Normally, notifications sent by action_notify_sender() have a preamble warning
about message modifications. If you do not want this, set $NotifyNoPreamble to 1.
$CSSHost (default 127.0.0.1:7777:local)
Host and port for the Symantec CarrierScan Server virus scanner. This takes the
form ip_addr:port:local_or_nonlocal. The ip_addr and port are the host and port on
which CarrierScan Server is listening. If you want to scan local files, append
:local to force the use of the AVSCANLOCAL command. If the CarrierScan Server is
on another host, append :nonlocal to force the file contents to be sent to the
scanner over the socket.
$SophieSock (default /var/spool/MIMEDefang/sophie)
Socket used for Sophie daemon calls within message_contains_virus_sophie and
entity_contains_virus_sophie unless a socket is provided by the calling routine.
$ClamdSock (default /var/spool/MIMEDefang/clamd.sock)
Socket used for clamd daemon calls within message_contains_virus_clamd and
entity_contains_virus_clamd unless a socket is provided by the calling routine.
$TrophieSock (default /var/spool/MIMEDefang/trophie)
Socket used for Trophie daemon calls within message_contains_virus_trophie and
entity_contains_virus_trophie unless a socket is provided by the calling routine.
FILTER
The heart of mimedefang-filter is the filter procedure. See the examples that came with
MIMEDefang to learn to write a filter. The filter is called with the following arguments:
$entity
The MIME::Entity object. (See the MIME::tools Perl module documentation.)
$fname The suggested attachment filename, or "" if none was supplied.
$ext The file extension (all characters from the rightmost period to the end of the
filename.)
$type The MIME type (for example, "text/plain".)
The filename is derived as follows:
o First, if the Content-Disposition header has a "filename" field, it is used.
o Otherwise, if the Content-Type header has a "name" field, it is used.
o Otherwise, the Content-Description header value is used.
Note that the truly paranoid will check all three fields for matches. The functions
re_match and re_match_ext perform regular expression matches on all three of the fields
named above, and return 1 if any field matches. See the sample filters for details. The
calling sequence is:
re_match($entity, "regexp")
re_match_ext($entity, "regexp")
re_match returns true if any of the fields matches the regexp without regard to case.
re_match_ext returns true if the extension in any field matches. An extension is defined
as the last dot in a name and all remaining characters.
A third function called re_match_in_zip_directory will look inside zip files and return
true if any of the file names inside the zip archive match the regular expression. Call
it like this:
my $bh = $entity->bodyhandle();
my $path = (defined($bh)) ? $bh->path() : undef;
if (defined($path) and re_match_in_zip_directory($path, "regexp")) {
# Take action...
}
You should not call re_match_in_zip_directory unless you know that the entity is a zip
file attachment.
GLOBAL VARIABLES SET BY MIMEDEFANG.PL
The following global variables are set by mimedefang.pl and are available for use in your
filter. All of these variables are always available to filter_begin, filter,
filter_multipart and filter_end. In addition, some of them are available in filter_relay,
filter_sender or filter_recipient. If this is the case, it will be noted below.
%Features
This hash lets you determine at run-time whether certain functionality is
available. This hash is available at all times assuming the
detect_and_load_perl_modules() function has been called. The defined features are:
$Features{"SpamAssassin"} is 1 if SpamAssassin 1.6 or better is installed; 0
otherwise.
$Features{"HTML::Parser"} is 1 if HTML::Parser is installed; 0 otherwise.
$Features{"Virus:FPROTD"} is currently always 0. Set it to 1 in your filter file
if you have F-Risk's FPROTD scanner earlier than version 6.
$Features{"Virus:FPROTD6"} is currently always 0. Set it to 1 in your filter file
if you have version 6 of F-Risk's FPROTD scanner.
$Features{"Virus:SymantecCSS"} is currently always 0. Set it to 1 in your filter
file if you have the Symantec CarrierScan Server virus scanner.
$Features{"Virus:NAI"} is the full path to NAI uvscan if it is installed; 0 if it
is not.
$Features{"Virus:BDC"} is the full path to Bitdefender bdc if it is installed; 0 if
it is not.
$Features{"Virus:NVCC"} is the full path to Norman Virus Control nvcc if it is
installed; 0 if it is not.
$Features{"Virus:HBEDV"} is the full path to H+BEDV AntiVir if it is installed; 0
if it is not.
$Features{"Virus:VEXIRA"} is the full path to Central Command Vexira if it is
installed; 0 if it is not.
$Features{"Virus:SOPHOS"} is the full path to Sophos sweep if it is installed; 0 if
it is not.
$Features{"Virus:SAVSCAN"} is the full path to Sophos savscan if it is installed; 0
if it is not.
$Features{"Virus:CLAMAV"} is the full path to Clam AV clamscan if it is installed;
0 if it is not.
$Features{"Virus:AVP"} is the full path to AVP AvpLinux if it is installed; 0 if it
is not.
$Features{"Virus:AVP5"} is the full path to Kaspersky "aveclient" if it is
installed; 0 if it is not.
$Features{"Virus:CSAV"} is the full path to Command csav if it is installed; 0 if
it is not.
$Features{"Virus:FSAV"} is the full path to F-Secure fsav if it is installed; 0 if
it is not.
$Features{"Virus:FPROT"} is the full path to F-Risk f-prot if it is installed; 0 if
it is not.
$Features{"Virus:FPSCAN"} is the full path to F-Risk fpscan if it is installed; 0
if it is not.
$Features{"Virus:SOPHIE"} is the full path to Sophie if it is installed; 0 if it is
not.
$Features{"Virus:CLAMD"} is the full path to clamd if it is installed; 0 if it is
not.
$Features{"Virus:TROPHIE"} is the full path to Trophie if it is installed; 0 if it
is not.
$Features{"Virus:NOD32"} is the full path to ESET NOD32 nod32cli if it is
installed; 0 if it is not.
NOTE: Perl-module based features such as SpamAssassin are determined at runtime and
may change as these are added and removed. Most Virus features are predetermined
at the time of configuration and do not adapt to runtime availability unless
changed by the filter rules.
$CWD This variable holds the working directory for the current message. During filter
processing, mimedefang.pl chdir's into this directory before calling any of the
filter_ functions. Note that this variable is set correctly in filter_sender and
filter_recipient, but not in filter_relay.
$SuspiciousCharsInHeaders
If this variable is true, then mimedefang has discovered suspicious characters in
message headers. This might be an exploit for bugs in MIME-parsing routines in
some badly-written mail user agents (e.g. Microsoft Outlook.) You should always
drop such messages.
$SuspiciousCharsInBody
If this variable is true, then mimedefang has discovered suspicious characters in
the message body. This might be an exploit for bugs in MIME-parsing routines in
some badly-written mail user agents (e.g. Microsoft Outlook.) You should always
drop such messages.
$RelayHostname
The host name of the relay. This is the name of the host that is attempting to
send e-mail to your host. May be "undef" if the host name could not be determined.
This variable is available in filter_relay, filter_sender and filter_recipient in
addition to the body filtering functions.
$RelayAddr
The IP address of the sending relay (as a string consisting of four dot-separated
decimal numbers.) One potential use of $RelayAddr is to limit mailing to certain
lists to people within your organization. This variable is available in
filter_relay, filter_sender and filter_recipient in addition to the body filtering
functions.
$Helo The argument given to the SMTP "HELO" command. This variable is available in
filter_sender and filter_recipient, but not in filter_relay.
$Subject
The contents of the "Subject:" header.
$Sender
The sender of the e-mail. This variable is set in filter_sender and
filter_recipient in addition to the body filtering functions.
@Recipients
A list of the recipients. In filter_recipient, it is set to the single recipient
currently under consideration. Or, after calling read_commands_file within
filter_recipient, the current recipient under consideration is in the final
position of the array, at $Recipients[-1], while any previous (and accepted)
recipients are at the beginning of the array, that is, in @Recipients[0 ..
$#Recipients-1].
$MessageID
The contents of the "Message-ID:" header if one is present. Otherwise, contains
the string "NOQUEUE".
$QueueID
The Sendmail queue identifier if it could be determined. Otherwise, contains the
string "NOQUEUE". This variable is set correctly in filter_sender and
filter_recipient, but it is not available in filter_relay.
$MsgID Set to $QueueID if the queue ID could be determined; otherwise, set to $MessageID.
This identifier should be used in logging, because it matches the identifier used
by Sendmail to log messages. Note that this variable is set correctly in
filter_sender and filter_recipient, but it is not available in filter_relay.
$VirusScannerMessages
Each time a virus-scanning function is called, messages (if any) from the virus
scanner are accumulated in this variable. You can use it in filter_end to
formulate a notification (if you wish.)
$VirusName
If a virus-scanning function found a virus, this variable will hold the virus name
(if it could be determined.)
$SASpamTester
If defined, this is the configured Mail::SpamAssassin object used for mail tests.
It may be initialized with a call to spam_assassin_init which also returns it.
%SendmailMacros
This hash contains the values of some Sendmail macros. The hash elements exist
only for macros defined by Sendmail. See the Sendmail documentation for the
meanings of the macros.
By default, mimedefang passes the values of the following macros: ${daemon_name},
${daemon_port}, ${if_name}, ${if_addr}, $j, $_, $i, ${tls_version}, ${cipher},
${cipher_bits}, ${cert_subject}, ${cert_issuer}, ${auth_type}, ${auth_authen},
${auth_ssf}, ${auth_author}, ${mail_mailer}, ${mail_host} and ${mail_addr}. In
addition, ${client_port} is set to the client's TCP port.
If any macro is not set or not passed to milter, it will be unavailable. To access
the value of a macro, use:
$SendmailMacros{"macro_name"}
Do not place curly brackets around the macro name. This variable is available in
filter_sender and filter_recipient after a call to read_commands_file.
@SenderESMTPArgs
This array contains all the ESMTP arguments supplied in the MAIL FROM: command.
For example:
sub print_sender_esmtp_args {
foreach (@SenderESMTPArgs) {
print STDERR "Sender ESMTP arg: $_0;
}
}
%RecipientESMTPArgs
This hash contains all the ESMTP arguments supplied in each RCPT TO: command. For
example:
sub print_recip_esmtp_args {
foreach my $recip (@Recipients) {
foreach(@{$RecipientESMTPArgs{$recip}}) {
print STDERR "Recip ESMTP arg for $recip: $_0;
}
}
}
%RecipientMailers
This hash contains the Sendmail "mailer-host-address" triple for each recipient.
Here's an example of how to use it:
sub print_mailer_info {
my($recip, $mailer, $host, $addr);
foreach $recip (@Recipients) {
$mailer = ${RecipientMailers{$recip}}[0];
$host = ${RecipientMailers{$recip}}[1];
$addr = ${RecipientMailers{$recip}}[2];
print STDERR "$recip: mailer=$mailer, host=$host, addr=$addr\n";
}
}
In filter_recipient, this variable by default only contains information on the
recipient currently under investigation. Information on all recipients is available
after calling read_commands_file.
ACTIONS
When the filter procedure decides how to dispose of a part, it should call one or more
action_ subroutines. The action subroutines are:
action_accept()
Accept the part.
action_rebuild()
Rebuild the mail body, even if mimedefang thinks no changes were made. Normally,
mimedefang does not alter a message if no changes were made. action_rebuild may be
used if you make changes to entities directly (by manipulating the MIME::Head, for
example.) Unless you call action_rebuild, mimedefang will be unaware of the
changes. Note that all the built-in action... routines that change a message
implicitly call action_rebuild.
action_add_header($hdr, $val)
Add a header to the message. This can be used in filter_begin or filter_end. The
$hdr component is the header name without the colon, and the $val is the header
value. For example, to add the header:
X-MyHeader: A nice piece of text
use:
action_add_header("X-MyHeader", "A nice piece of text");
action_change_header($hdr, $val, $index)
Changes an existing header in the message. This can be used in filter_begin or
filter_end. The $hdr parameter is the header name without the colon, and $val is
the header value. If the header does not exist, then a header with the given name
and value is added.
The $index parameter is optional; it defaults to 1. If you supply it, then the
$index'th occurrence of the header is changed, if there is more than one header
with the same name. (This is common with the Received: header, for example.)
action_insert_header($hdr, $val, $index)
Add a header to the message int the specified position $index. A position of 0
specifies that the header should be prepended before existing headers. This can be
used in filter_begin or filter_end. The $hdr component is the header name without
the colon, and the $val is the header value.
action_delete_header($hdr, $index)
Deletes an existing header in the message. This can be used in filter_begin or
filter_end. The $hdr parameter is the header name without the colon.
The $index parameter is optional; it defaults to 1. If you supply it, then the
$index'th occurrence of the header is deleted, if there is more than one header
with the same name.
action_delete_all_headers($hdr)
Deletes all headers with the specified name. This can be used in filter_begin or
filter_end. The $hdr parameter is the header name without the colon.
action_drop()
Drop the part. If called from filter_multipart, drops all contained parts also.
action_drop_with_warning($msg)
Drop the part, but add the warning $msg to the e-mail message. If called from
filter_multipart, drops all contained parts also.
action_accept_with_warning($msg)
Accept the part, but add the warning $msg to the e-mail message.
action_replace_with_warning($msg)
Drop the part and replace it with a text part $msg. If called from
filter_multipart, drops all contained parts also.
action_replace_with_url($entity, $doc_root, $base_url, $msg, [$cd_data, $salt])
Drop the part, but save it in a unique location under $doc_root. The part is
replaced with the text message $msg. The string "_URL_" in $msg is replaced with
$base_url/something, that can be used to retrieve the message.
You should not use this function in filter_multipart.
This action is intended for stripping large parts out of the message and replacing
them to a link on a Web server. Here's how you would use it in filter():
$size = (stat($entity->bodyhandle->path))[7];
if ($size > 1000000) {
return action_replace_with_url($entity,
"/home/httpd/html/mail_parts",
"http://mailserver.company.com/mail_parts",
"The attachment was larger than 1,000,000 bytes.\n" .
"It was removed, but may be accessed at this URL:\n\n" .
"\t_URL_\n");
}
This example moves attachments greater than 1,000,000 bytes into
/home/httpd/html/mail_parts and replaces them with a link. The directory should be
accessible via a Web server at http://mailserver.company.com/mail_parts.
The generated name is created by performing a SHA1 hash of the part and adding the
extension to the ASCII-HEX representation of the hash. If many different e-mails
are sent containing an identical large part, only one copy of the part is stored,
regardless of the number of senders or recipients.
For privacy reasons, you must turn off Web server indexing in the directory in
which you place mail parts, or anyone will be able to read them. If indexing is
disabled, an attacker would have to guess the SHA1 hash of a part in order to read
it.
Optionally, a fifth argument can supply data to be saved into a hidden dot filename
based on the generated name. This data can then be read in on the fly by a CGI
script or mod_perl module before serving the file to a web client, and used to add
information to the response, such as Content-Disposition data.
A sixth optional argument, $salt, is mixed in to the SHA1 hash. This salt can be
any string and should be kept confidential. The salt is designed to prevent people
from guessing whether or not a particular attachment has been received on your
server by altering the SHA1 hash calculation.
action_defang($entity, $name, $fname, $type)
Accept the part, but change its name to $name, its suggested filename to $fname and
its MIME type to $type. If $name or $fname are "", then mimedefang.pl generates
generic names. Do not use this action in filter_multipart.
If you use action_defang, you must define a subroutine called defang_warning in
your filter. This routine takes two arguments: $oldfname (the original name of an
attachment) and $fname (the defanged version.) It should return a message telling
the user what happened. For example:
sub defang_warning {
my($oldfname, $fname) = @_;
return "The attachment '$oldfname' was renamed to '$fname'\n";
}
action_external_filter($entity, $cmd)
Run an external UNIX command $cmd. This command must read the part from the file
./FILTERINPUT and leave the result in ./FILTEROUTPUT. If the command executes
successfully, returns 1, otherwise 0. You can test the return value and call
another action_ if the filter failed. Do not use this action in filter_multipart.
action_quarantine($entity, $msg)
Drop and quarantine the part, but add the warning $msg to the e-mail message.
action_quarantine_entire_message($msg)
Quarantines the entire message in a quarantine directory on the mail server, but
does not otherwise affect disposition of the message. If "$msg" is non-empty, it
is included in any administrator notification.
action_sm_quarantine($reason)
Quarantines a message in the Sendmail mail queue using the new QUARANTINE facility
of Sendmail 8.13. Consult the Sendmail documentation for details about this
facility. If you use action_sm_quarantine with a version of Sendmail that lacks
the QUARANTINE facility, mimedefang will log an error message and not quarantine
the message.
action_bounce($reply, $code, $dsn)
Reject the entire e-mail message with an SMTP failure code, and the one-line error
message $reply. If the optional $code and $dsn arguments are supplied, they
specify the numerical SMTP reply code and the extended status code (DSN code). If
the codes you supply do not make sense for a bounce, they are replaced with "554"
and "5.7.1" respectively.
action_bounce merely makes a note that the message is to be bounced; remaining
parts are still processed. If action_bounce is called for more than one part, the
mail is bounced with the message in the final call to action_bounce. You can
profitably call action_quarantine followed by action_bounce if you want to keep a
copy of the offending part. Note that the message is not bounced immediately;
rather, remaining parts are processed and the message is bounced after all parts
have been processed.
Note that despite its name, action_bounce does not generate a "bounce message". It
merely rejects the message with an SMTP failure code.
WARNING: action_bounce() may cause the sending relay to generate spurious bounce
messages if the sender address is faked. This is a particular problem with
viruses. However, we believe that on balance, it's better to bounce a virus than
to silently discard it. It's almost never a good idea to hide a problem.
action_tempfail($msg, $code, $dsn)
Cause an SMTP "temporary failure" code to be returned, so the sending mail relay
requeues the message and tries again later. The message $msg is included with the
temporary failure code. If the optional $code and $dsn arguments are supplied,
they specify the numerical SMTP reply code and the extended status code (DSN code).
If the codes you supply do not make sense for a temporary failure, they are
replaced with "450" and "4.7.1" respectively.
action_discard()
Silently discard the message, notifying nobody. You can profitably call
action_quarantine followed by action_discard if you want to keep a copy of the
offending part. Note that the message is not discarded immediately; rather,
remaining parts are processed and the message is discarded after all parts have
been processed.
action_notify_sender($message)
This action sends an e-mail back to the original sender with the indicated message.
You may call another action after this one. If action_notify_sender is called more
than once, the messages are accumulated into a single e-mail message -- at most one
notification message is sent per incoming message. The message should be
terminated with a newline.
The notification is delivered in deferred mode; you should run a client-queue
runner if you are using Sendmail 8.12.
NOTE: Viruses often fake the sender address. For that reason, if a virus-scanner
has detected a virus, action_notify_sender is disabled and will simply log an error
message if you try to use it.
action_notify_administrator($message)
This action e-mails the MIMEDefang administrator the supplied message. You may
call another action after this one; action_notify_administrator does not affect
mail processing. If action_notify_administrator is called more than once, the
messages are accumulated into a single e-mail message -- at most one notification
message is sent per incoming message. The message should be terminated with a
newline.
The notification is delivered in deferred mode; you should run a client-queue
runner if you are using Sendmail 8.12.
append_text_boilerplate($entity, $boilerplate, $all)
This action should only be called from filter_end. It appends the text
"\n$boilerplate\n" to the first text/plain part (if $all is 0) or to all text/plain
parts (if $all is 1).
append_html_boilerplate($entity, $boilerplate, $all)
This action should only be called from filter_end. It adds the text
"\n$boilerplate\n" to the first text/html part (if $all is 0) or to all text/html
parts (if $all is 1). This function tries to be smart about inserting the
boilerplate; it uses HTML::Parser to detect closing tags and inserts the
boilerplate before the </body> tag if there is one, or before the </html> tag if
there is no </body>. If there is no </body> or </html> tag, it appends the
boilerplate to the end of the part.
Do not use append_html_boilerplate unless you have installed the HTML::Parser Perl
module.
Here is an example illustrating how to use the boilerplate functions:
sub filter_end {
my($entity) = @_;
append_text_boilerplate($entity,
"Lame text disclaimer", 0);
append_html_boilerplate($entity,
"<em>Lame</em> HTML disclaimer", 0);
}
action_add_part($entity, $type, $encoding, $data, $fname, $disposition [, $offset])
This action should only be called from the filter_end routine. It adds a new part
to the message, converting the original message to mutipart if necessary. The
function returns the part so that additional mime attributes may be set on it.
Here's an example:
sub filter_end {
my($entity) = @_;
action_add_part($entity, "text/plain", "-suggest",
"This e-mail does not represent" .
"the official policy of FuBar, Inc.\n",
"disclaimer.txt", "inline");
}
The $entity parameter must be the argument passed in to filter_end. The $offset
parameter is optional; if omitted, it defaults to -1, which adds the new part at
the end. See the MIME::Entity man page and the add_part member function for the
meaning of $offset.
Note that action_add_part tries to be more intelligent than simply calling
$entity->add_part. The decision process is as follows:
o If the top-level entity is multipart/mixed, then the part is simply added.
o Otherwise, a new top-level multipart/mixed container is generated, and the original
top-level entity is made the first part of the multipart/mixed container. The new
part is then added to the multipart/mixed container.
action_add_entity($entity [, $offset])
This is similar to action_add_part but takes a pre-built MIME::Entity object rather
than constructing one based on $type, $encoding, $data, $fname and $disposition
arguments.
USEFUL ROUTINES
mimedefang.pl includes some useful functions you can call from your filter:
detect_and_load_perl_modules()
Unless you really know what you're doing, this function must be called first thing
in your filter file. It causes mimedefang.pl to detect and load Perl modules such
as Mail::SpamAssassin, Net::DNS, etc., and to populate the %Features hash.
send_quarantine_notifications()
This function should be called from filter_end. If any parts were quarantined, a
quarantine notification is sent to the MIMEDefang administrator. Please note that
if you do not call send_quarantine_notifications, then no quarantine notifications
are sent.
get_quarantine_dir()
This function returns the full path name of the quarantine directory. If you have
not yet quarantined any parts of the message, a quarantine directory is created and
its pathname returned.
change_sender($sender)
This function changes the envelope sender to $sender. It can only be called from
filter_begin or any later function. Please note that this function is only
supported with Sendmail/Milter 8.14.0 or newer. It has no effect if you're running
older versions.
add_recipient($recip)
This function adds $recip to the list of envelope recipients. A copy of the
message (after any modifications by MIMEDefang) will be sent to $recip in addition
to the original recipients. Note that add_recipient does not modify the
@Recipients array; it just makes a note to Sendmail to add the recipient.
delete_recipient($recip)
This function deletes $recip from the list of recipients. That person will not
receive a copy of the mail. $recip should exactly match an entry in the
@Recipients array for delete_recipient() to work. Note that delete_recipient does
not modify the @Recipients array; it just makes a note to Sendmail to delete the
recipient.
resend_message($recip1, $recip2, ...)
or
resend_message(@recips)
This function immediately resends the original, unmodified mail message to each of
the named recipients. The sender's address is preserved. Be very careful when
using this function, because it resends the original message, which may contain
undesired attachments. Also, you should not call this function from filter(),
because it resends the message each time it is called. This may result in multiple
copies being sent if you are not careful. Call from filter_begin() or filter_end()
to be safe.
The function returns true on success, or false if it fails.
Note that the resend_message function delivers the mail in deferred mode (using
Sendmail's "-odd" flag.) You must run a client-submission queue processor if you
use Sendmail 8.12. We recommend executing this command as part of the Sendmail
startup sequence:
sendmail -Ac -q5m
remove_redundant_html_parts($entity)
This function should only be called from filter_end. It removes redundant HTML
parts from the message. It works by deleting any part of type text/html from the
message if (1) it is a sub-part of a multipart/alternative part, and (2) there is
another part of type text/plain under the multipart/alternative part.
replace_entire_message($entity)
This function can only be called from filter_end. It replaces the entire message
with $entity, a MIME::Entity object that you have constructed. You can use any of
the MIME::Tools functions to construct the entity.
read_commands_file()
This function should only be called from filter_sender and filter_recipient. This
will read the COMMANDS file (as described in mimedefang-protocol(7)), and will fill
or update the following global variables: $Sender, @Recipients, %RecipientMailers,
$RelayAddr, $RealRelayAddr, $RelayHostname, $RealRelayHostname, $QueueID, $Helo,
%SendmailMacros.
If you do not call read_commands_file, then the only information available in
filter_sender and filter_recipient is that which is passed as an argument to the
function.
stream_by_domain()
Do not use this function unless you have Sendmail 8.12 and locally- submitted e-
mail is submitted using SMTP.
This function should only be called at the very beginning of filter_begin(), like
this:
sub filter_begin {
if (stream_by_domain()) {
return;
}
# Rest of filter_begin
}
stream_by_domain() looks at all the recipients of the message, and if they belong
to the same domain (e.g., joe@domain.com, jane@domain.com and sue@domain.com), it
returns 0 and sets the global variable $Domain to the domain (domain.com in this
example.)
If users are in different domains, stream_by_domain() resends the message (once to
each domain) and returns 1 For example, if the original recipients are joe@abc.net,
jane@xyz.net and sue@abc.net, the original message is resent twice: One copy to
joe@abc.net and sue@abc.net, and another copy to jane@xyz.net. Also, any
subsequent scanning is canceled (filter() and filter_end() will not be called for
the original message) and the message is silently discarded.
If you have Sendmail 8.12, then locally-submitted messages are sent via SMTP, and
MIMEDefang will be called for each resent message. It is possible to set up
Sendmail 8.12 so locally-submitted messages are delivered directly; in this case,
stream_by_domain will not work.
Using stream_by_domain allows you to customize your filter rules for each domain.
If you use the function as described above, you can do this in your filter routine:
sub filter {
my($entity, $fname, $ext, $type) = @_;
if ($Domain eq "abc.com") {
# Filter actions for abc.com
} elsif ($Domain eq "xyz.com") {
# Filter actions for xyz.com
} else {
# Default filter actions
}
}
You cannot rely on $Domain being set unless you have called stream_by_domain().
stream_by_recipient()
Do not use this function unless you have Sendmail 8.12 and locally- submitted e-
mail is submitted using SMTP.
This function should only be called at the very beginning of filter_begin(), like
this:
sub filter_begin {
if (stream_by_recipient()) {
return;
}
# Rest of filter_begin
}
If there is more than one recipient, stream_by_recipient() resends the message once
to each recipient. That way, you can customize your filter rules on a per-
recipient basis. This may increase the load on your mail server considerably.
Also, a "recipient" is determined before alias expansion. So "all@mydomain.com" is
considered a single recipient, even if Sendmail delivers to a list.
If you have Sendmail 8.12, then locally-submitted messages are sent via SMTP, and
MIMEDefang will be called for each resent message. It is possible to set up
Sendmail 8.12 so locally-submitted messages are delivered directly; in this case,
stream_by_recipient() will not work.
stream_by_recipient() allows you to customize your filter rules for each recipient
in a manner similar to stream_by_domain().
LOGGING
md_graphdefang_log_enable($facility, $enum_recips)
Enables the md_graphdefang_log function (described next). The function logs to
syslog using the specified facility. If you omit $facility, it defaults to 'mail'.
If you do not call md_graphdefang_log_enable in your filter, then any calls to
md_graphdefang_log simply do nothing.
If you supply $enum_recips as 1, then a line of logging is output for each
recipient of a mail message. If it is zero, then only a single line is output for
each message. If you omit $enum_recips, it defaults to 1.
md_graphdefang_log($event, $v1, $v2)
Logs an event with up to two optional additional parameters. The log message has a
specific format useful for graphing tools; the message looks like this:
MDLOG,msgid,event,v1,v2,sender,recipient,subj
"MDLOG" is literal text. "msgid" is the Sendmail queue identifier. "event" is the
event name, and "v1" and "v2" are the additional parameters. "sender" is the
sender's e-mail address. "recipient" is the recipient's e-mail address, and "subj"
is the message subject. If a message has more than one recipient,
md_graphdefang_log may log an event message for each recipient, depending on how
you called md_graphdefang_log_enable.
Note that md_graphdefang_log should not be used in filter_relay, filter_sender or
filter_recipient. The global variables it relies on are not valid in that context.
If you want to log general text strings, do not use md_graphdefang_log. Instead,
use md_syslog (described next).
md_syslog($level, $msg)
Logs the message $msg to syslog, using level $level. The level is a literal
string, and should be one of 'err', 'debug', 'warning', ´emerg', 'crit', 'notice'
or 'info'. (See syslog(3) for details.)
Note that md_syslog does not perform %-subsitutions like syslog(3) does. Depending
on your Perl installation, md_syslog boils down to a call to Unix::Syslog::syslog
or Sys::Syslog::syslog. See the Unix::Syslog or Sys::Syslog man pages for more
details.
md_openlog($tag, $facility)
Sets the tag used in syslog messages to $tag, and sends the logs to the $facility
facility. If you do not call md_openlog before you call md_syslog, then it is
called implicitly with $tag set to mimedefang.pl and $facility set to mail.
RBL LOOKUP FUNCTIONS
mimedefang.pl includes the following functions for looking up IP addresses in DNS-based
real-time blacklists. Note that the "relay_is_blacklisted" functions are deprecated and
may be removed in a future release. Instead, you should use the module Net::DNSBL::Client
from CPAN.
relay_is_blacklisted($relay, $domain)
This checks a DNS-based real-time spam blacklist, and returns true if the relay
host is blacklisted, or false otherwise. (In fact, the return value is whatever
the blacklist returns as a resolved hostname, such as "127.0.0.4")
Note that relay_is_blacklisted uses the built-in gethostbyname function; this is
usually quite inefficient and does not permit you to set a timeout on the lookup.
Instead, we recommend using one of the other DNS lookup function described in this
section. (Note, though, that the other functions require the Perl Net::DNS module,
whereas relay_is_blacklisted does not.)
Here's an example of how to use relay_is_blacklisted:
if (relay_is_blacklisted($RelayAddr, "rbl.spamhaus.org")) {
action_add_header("X-Blacklist-Warning",
"Relay $RelayAddr is blacklisted by Spamhaus");
}
relay_is_blacklisted_multi($relay, $timeout, $answers_wanted, [$domain1, $domain2, ...],
$res)
This function is similar to relay_is_blacklisted, except that it takes a timeout
argument (specified in seconds) and an array of domains to check. The function
checks all domains in parallel, and is guaranteed to return in $timeout seconds.
(Actually, it may take up to one second longer.)
The parameters are:
$relay -- the IP address you want to look up
$timeout -- a timeout in seconds after which the function should return
$answers_wanted -- the maximum number of positive answers you care about. For
example, if you're looking up an address in 10 different RBLs, but are going to
bounce it if it is on four or more, you can set $answers_wanted to 4, and the
function returns as soon as four "hits" are discovered. If you set $answers_wanted
to zero, then the function does not return early.
[$domain1, $domain2, ...] -- a reference to an array of strings, where each string
is an RBL domain.
$res -- a Net::DNS::Resolver object. This argument is optional; if you do not
supply it, then relay_is_blacklisted_multi constructs its own resolver.
The return value is a reference to a hash; the keys of the hash are the original
domains, and the corresponding values are either SERVFAIL, NXDOMAIN, or a list of
IP addresses in dotted-quad notation.
Here's an example:
$ans = relay_is_blacklisted_multi($RelayAddr, 8, 0,
["sbl.spamhaus.org", "relays.ordb.org"]);
foreach $domain (keys(%$ans)) {
$r = $ans->{$domain};
if (ref($r) eq "ARRAY") {
# It's an array -- it IS listed in RBL
print STDERR "Lookup in $domain yields [ ";
foreach $addr (@$r) {
print STDERR $addr . " ";
}
print STDERR "]\n";
} else {
# It is NOT listed in RBL
print STDERR "Lookup in $domain yields "
. $ans->{$domain} . "\n";
}
}
You should compare each of $ans->{$domain} to "SERVFAIL" and "NXDOMAIN" to see if
the relay is not listed. Any other return value will be an array of IP addresses
indicating that the relay is listed.
Any lookup that does not succeed within $timeout seconds has the corresponding
return value set to SERVFAIL.
relay_is_blacklisted_multi_list($relay, $timeout, $answers_wanted, [$domain1, $domain2,
...], $res)
This function is similar to relay_is_blacklisted_multi except that the return value
is simply an array of RBL domains in which the relay was listed.
relay_is_blacklisted_multi_count($relay, $timeout, $answers_wanted, [$domain1, $domain2,
...], $res)
This function is similar to relay_is_blacklisted_multi except that the return value
is an integer specifying the number of domains on which the relay was blacklisted.
md_get_bogus_mx_hosts($domain)
This function looks up all the MX records for the specified domain (or A records if
there are no MX records) and returns a list of "bogus" IP addresses found amongst
the records. A "bogus" IP address is an IP address in a private network
(10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16), the loopback network (127.0.0.0/8),
local-link for auto-DHCP (169.254.0.0/16), IPv4 multicast (224.0.0.0/4) or reserved
(240.0.0.0/4).
Here's how you might use the function in filter_sender:
sub filter_sender {
my ($sender, $ip, $hostname, $helo) = @_;
if ($sender =~ /@([^>]+)/) {
my $domain = $1;
my @bogushosts = md_get_bogus_mx_hosts($domain);
if (scalar(@bogushosts)) {
return('REJECT', "Domain $domain contains bogus MX record(s) " .
join(', ', @bogushosts));
}
}
return ('CONTINUE', 'ok');
}
TEST FUNCTIONS
mimedefang.pl includes some "test" functions:
md_version()
returns the version of MIMEDefang as a string (for example, "2.84").
message_rejected()
Returns true if any of action_tempfail, action_bounce or action_discard have been
called for this message; returns false otherwise.
If you have the Mail::SpamAssassin Perl module installed (see http://www.spamassassin.org)
you may call any of the spam_assassin_* functions. They should only be called from
filter_begin or filter_end because they operate on the entire message at once. Most
functions use an optionally provided config file. If no config file is provided,
mimedefang.pl will look for one of four default SpamAssassin preference files. The first
of the following found will be used:
o /etc/sa-mimedefang.cf
o /etc/mail/sa-mimedefang.cf
o /etc/spamassassin/local.cf
o /etc/spamassassin.cf
Important Note: MIMEDefang does not permit SpamAssassin to modify messages. If you want
to tag spam messages with special headers or alter the subject line, you must use
MIMEDefang functions to do it. Setting SpamAssassin configuration options to alter
messages will not work.
spam_assassin_is_spam([ $config_file ])
Determine if the current message is SPAM/UCE as determined by SpamAssassin.
Compares the score of the message against the threshold score (see below) and
returns true if it is. Uses spam_assassin_check below.
spam_assassin_check([ $config_file ])
This function returns a four-element list of the form ($hits, $required, $tests,
$report). $hits is the "score" given to the message by SpamAssassin (higher score
means more likely SPAM). $required is the number of hits required before
SpamAssassin concludes that the message is SPAM. $tests is a comma-separated list
of SpamAssassin test names, and $report is text detailing which tests triggered and
their point score. This gives you insight into why SpamAssassin concluded that the
message is SPAM. Uses spam_assassin_status below.
spam_assassin_status([ $config_file ])
This function returns a Mail::SpamAssasin::PerMsgStatus object. Read the
SpamAssassin documentation for details about this object. You are responsible for
calling the finish method when you are done with it. Uses spam_assassin_init and
spam_assassin_mail below.
spam_assassin_init([ $config_file ])
This function returns the new global Mail::SpamAssassin object with the specified
or default config (outlined above). If the global object is already defined,
returns it -- does not change config files! The object can be used to perform
other SpamAssassin related functions.
spam_assassin_mail()
This function returns a Mail::SpamAssassin::NoMailAudit object with the current
email message contained in it. It may be used to perform other SpamAssassin
related functions.
md_copy_orig_msg_to_work_dir()
Normally, virus-scanners are passed only the unpacked, decoded parts of a MIME
message. If you want to pass the original, undecoded message in as well, call
md_copy_orig_msg_to_work_dir prior to calling message_contains_virus.
md_copy_orig_msg_to_work_dir_as_mbox_file()
Normally, virus-scanners are passed only the unpacked, decoded parts of a MIME
message. If you want to pass the original, undecoded message in as a UNIX-style
"mbox" file, call md_copy_orig_msg_to_work_dir_as_mbox_file prior to calling
message_contains_virus. The only difference between this function and
md_copy_orig_msg_to_work_dir is that this function prepends a "From_" line to make
the message look like a UNIX-style mbox file. This is required for some virus
scanners (such as Clam AntiVirus) to recognize the file as an e-mail message.
message_contains_virus()
This function runs every installed virus-scanner and returns the scanner results.
The function should be called in list context; the return value is a three-element
list ($code, $category, $action).
$code is the actual return code from the virus scanner.
$category is a string categorizing the return code:
"ok" - no viruses detected.
"not-installed" - indicated virus scanner is not installed.
"cannot-execute" - for some reason, the scanner could not be executed.
"virus" - a virus was found.
"suspicious" - a "suspicious" file was found.
"interrupted" - scanning was interrupted.
"swerr" - an internal scanner software error occurred.
$action is a string containing the recommended action:
"ok" - allow the message through unmolested.
"quarantine" - a virus was detected; quarantine it.
"tempfail" - something went wrong; tempfail the message.
message_contains_virus_trend()
message_contains_virus_nai()
message_contains_virus_bdc()
message_contains_virus_nvcc()
message_contains_virus_csav()
message_contains_virus_fsav()
message_contains_virus_hbedv()
message_contains_virus_vexira()
message_contains_virus_sophos()
message_contains_virus_clamav()
message_contains_virus_avp()
message_contains_virus_avp5()
message_contains_virus_fprot()
message_contains_virus_fpscan()
message_contains_virus_fprotd()
message_contains_virus_fprotd_v6()
message_contains_virus_nod32()
These functions should be called in list context. They use the indicated anti-
virus software to scan the message for viruses. These functions are intended for
use in filter_begin() to make an initial scan of the e-mail message.
The supported virus scanners are:
nai NAI "uvscan" - http://www.nai.com/
Bitdefender "bdc" - http://www.bitdefender.com/
csav Command Anti-Virus - http://www.commandsoftware.com/
fsav F-Secure Anti-Virus - http://www.f-secure.com/
hbedv H+BEDV "AntiVir" - http://www.hbedv.com/
vexira Vexira "Vexira" - http://www.centralcommand.com/
sophos Sophos AntiVirus - http://www.sophos.com/
avp Kaspersky AVP and aveclient (AVP5) - http://www.avp.ru/
clamav Clam AntiVirus - http://www.clamav.net/
f-prot F-RISK F-PROT - http://www.f-prot.com/
nod32cli
ESET NOD32 - http://www.eset.com/
message_contains_virus_carrier_scan([$host])
Connects to the specified host:port:local_or_nonlocal (default $CSSHost), where the
Symantec CarrierScan Server daemon is expected to be listening. Return values are
the same as the other message_contains_virus functions.
message_contains_virus_sophie([$sophie_sock])
Connects to the specified socket (default $SophieSock), where the Sophie daemon is
expected to be listening. Return values are the same as the other
message_contains_virus functions.
message_contains_virus_clamd([$clamd_sock])
Connects to the specified socket (default $ClamdSock), where the clamd daemon is
expected to be listening. Return values are the same as the other
message_contains_virus functions.
message_contains_virus_trophie([$trophie_sock])
Connects to the specified socket (default $TrophieSock), where the Trophie daemon
is expected to be listening. Return values are the same as the other
message_contains_virus functions.
entity_contains_virus($entity)
This function runs the specified MIME::Entity through every installed virus-scanner
and returns the scanner results. The return values are the same as for
message_contains_virus().
entity_contains_virus_trend($entity)
entity_contains_virus_nai($entity)
entity_contains_virus_bdc($entity)
entity_contains_virus_nvcc($entity)
entity_contains_virus_csav($entity)
entity_contains_virus_fsav($entity)
entity_contains_virus_hbedv($entity)
entity_contains_virus_sophos($entity)
entity_contains_virus_clamav($entity)
entity_contains_virus_avp($entity)
entity_contains_virus_avp5($entity)
entity_contains_virus_fprot($entity)
entity_contains_virus_fpscan($entity)
entity_contains_virus_fprotd($entity)
entity_contains_virus_fprotd_v6($entity)
entity_contains_virus_nod32($entity)
These functions, meant to be called from filter(), are similar to the
message_contains_virus functions except they scan only the current part. They
should be called from list context, and their return values are as described for
the message_contains_virus functions.
entity_contains_virus_carrier_scan($entity[, $host])
Connects to the specified host:port:local_or_nonlocal (default $CSSHost), where the
Symantec CarrierScan Server daemon is expected to be listening. Return values are
the same as the other entity_contains_virus functions.
entity_contains_virus_sophie($entity[, $sophie_sock])
Connects to the specified socket (default $SophieSock), where the Sophie daemon is
expected to be listening. Return values are the same as the other
entity_contains_virus functions.
entity_contains_virus_trophie($entity[, $trophie_sock])
Connects to the specified socket (default $TrophieSock), where the Trophie daemon
is expected to be listening. Return values are the same as the other
entity_contains_virus functions.
entity_contains_virus_clamd($entity[, $clamd_sock])
Connects to the specified socket (default $ClamdSock), where the clamd daemon is
expected to be listening. Return values are the same as the other
entity_contains_virus functions.
SMTP FLOW
This section illustrates the flow of messages through MIMEDefang.
1. INITIAL CONNECTION
If you invoked mimedefang with the -r option and have defined a filter_relay
routine, it is called.
2. SMTP HELO COMMAND
The HELO string is stored internally, but no filter functions are called.
3. SMTP MAIL FROM: COMMAND
If you invoked mimedefang with the -s option and have defined a filter_sender
routine, it is called.
4. SMTP RCPT TO: COMMAND
If you invoked mimedefang with the -t option and have defined a filter_recipient
routine, it is called.
5. END OF SMTP DATA
filter_begin is called. For each MIME part, filter is called. Then filter_end is
called.
PRESERVING RELAY INFORMATION
Most organizations have more than one machine handling internet e-mail. If the primary
machine is down, mail is routed to a secondary (or tertiary, etc.) MX server, which stores
the mail until the primary MX host comes back up. Mail is then relayed to the primary MX
host.
Relaying from a secondary to a primary MX host has the unfortunate side effect of losing
the original relay's IP address information. MIMEDefang allows you to preserve this
information. One way around the problem is to run MIMEDefang on all the secondary MX
hosts and use the same filter. However, you may not have control over the secondary MX
hosts. If you can persuade the owners of the secondary MX hosts to run MIMEDefang with a
simple filter that only preserves relay information and does no other scanning, your
primary MX host can obtain relay information and make decisions using $RelayAddr and
$RelayHostname.
When you configure MIMEDefang, supply the "--with-ipheader" argument to the ./configure
script. When you install MIMEDefang, a file called /etc/mimedefang-ip-key will be created
which contains a randomly-generated header name. Copy this file to all of your mail
relays. It is important that all of your MX hosts have the same key. The key should be
kept confidential, but it's not disastrous if it leaks out.
On your secondary MX hosts, add this line to filter_end:
add_ip_validation_header();
Note: You should only add the validation header to mail destined for one of your other MX
hosts! Otherwise, the validation header will leak out.
When the secondary MX hosts relay to the primary MX host, $RelayAddr and $RelayHostname
will be set based on the IP validation header. If MIMEDefang notices this header, it sets
the global variable $WasResent to 1. Since you don't want to trust the header unless it
was set by one of your secondary MX hosts, you should put this code in filter_begin:
if ($WasResent) {
if ($RealRelayAddr ne "ip.of.secondary.mx" and
$RealRelayAddr ne "ip.of.tertiary.mx") {
$RelayAddr = $RealRelayAddr;
$RelayHostname = $RealRelayHostname;
}
}
This resets the relay address and hostname to the actual relay address and hostname,
unless the message is coming from one of your other MX hosts.
On the primary MX host, you should add this in filter_begin:
delete_ip_validation_header();
This prevents the validation header from leaking out to recipients.
Note: The IP validation header works only in message-oriented functions. It (obviously)
has no effect on filter_relay, filter_sender and filter_recipient, because no header
information is available yet. You must take this into account when writing your filter;
you must defer relay-based decisions to the message filter for mail arriving from your
other MX hosts.
GLOBAL VARIABLE LIFETIME
The following list describes the lifetime of global variables (thanks to Tony Nugent for
providing this documentation.)
If you set a global variable:
Outside a subroutine in your filter file
It is available to all functions, all the time.
In filter_relay, filter_sender or filter_recipient
Not guaranteed to be available to any other function, not even from one
filter_recipient call to the next, when receiving a multi-recipient email message.
In filter_begin
Available to filter_begin, filter and filter_end
In filter
Available to filter and filter_end
In filter_end
Available within filter_end
The "built-in" globals like $Subject, $Sender, etc. are always available to filter_begin,
filter and filter_end. Some are available to filter_relay, filter_sender or
filter_recipient, but you should check the documentation of the variable above for
details.
MAINTAINING STATE
There are four basic groups of filtering functions:
1 filter_relay
2 filter_sender
3 filter_recipient
4 filter_begin, filter, filter_multipart, filter_end
In general, for a given mail message, these groups of functions may be called in
completely different Perl processes. Thus, there is no way to maintain state inside Perl
between groups of functions. That is, you cannot set a variable in filter_relay and
expect it to be available in filter_sender, because the filter_sender invocation might
take place in a completely different process.
For a given mail message, it is always the case that filter_begin, filter,
filter_multipart and filter_end are called in the same Perl process. Therefore, you can
use global variables to carry state among those functions. You should be very careful to
initialize such variables in filter_begin to ensure no data leaks from one message to
another.
Also for a given mail message, the $CWD global variable holds the message spool directory,
and the current working directory is set to $CWD. Therefore, you can store state in files
inside $CWD. If filter_sender stores data in a file inside $CWD, then filter_recipient
can retrieve that data.
Since filter_relay is called directly after a mail connection is established, there is no
message context yet, no per-message mimedefang spool directory, and the $CWD global is not
set. Therefore, it is not possible to share information from filter_relay to one of the
other filter functions. The only thing that filter_relay has in common with the other
functions are the values in the globals $RelayAddr, and $RelayHostname. These could be
used to access per-remote-host information in some database.
Inside $CWD, we reserve filenames beginning with upper-case letters for internal
MIMEDefang use. If you want to create files to store state, name them beginning with a
lower-case letter to avoid clashes with future releases of MIMEDefang.
SOCKET MAPS
If you have Sendmail 8.13 or later, and have compiled it with the SOCKETMAP option, then
you can use a special map type that communicates over a socket with another program
(rather than looking up a key in a Berkeley database, for example.)
mimedefang-multiplexor implements the Sendmail SOCKETMAP protocol if you supply the -N
option. In that case, you can define a function called filter_map to implement map
lookups. filter_map takes two arguments: $mapname is the name of the Sendmail map (as
given in the K sendmail configuration directive), and $key is the key to be looked up.
filter_map must return a two-element list: ($code, $val) $code can be one of:
OK The lookup was successful. In this case, $val must be the result of the lookup
NOTFOUND
The lookup was unsuccessful -- the key was not found. In this case, $val should be
the empty string.
TEMP There was a temporary failure of some kind. $val can be an explanatory error
message.
TIMEOUT
There was a timeout of some kind. $val can be an explanatory error message.
PERM There was a permanent failure. This is not the same as an unsuccessful lookup; it
should be used only to indicate a serious misconfiguration. As before, $val can be
an explanatory error message.
Consider this small example. Here is a minimal Sendmail configuration file:
V10/Berkeley
Kmysock socket unix:/var/spool/MIMEDefang/map.sock
kothersock socket unix:/var/spool/MIMEDefang/map.sock
If mimedefang-multiplexor is invoked with the arguments -N
unix:/var/spool/MIMEDefang/map.sock, and the filter defines filter_map as follows:
sub filter_map ($$) {
my($mapname, $key) = @_;
my $ans;
if($mapname ne "mysock") {
return("PERM", "Unknown map $mapname");
}
$ans = reverse($key);
return ("OK", $ans);
}
Then in Sendmail's testing mode, we see the following:
> /map mysock testing123
map_lookup: mysock (testing123) returns 321gnitset (0)
> /map othersock foo
map_lookup: othersock (foo) no match (69)
(The return code of 69 means EX_UNAVAILABLE or Service Unavailable)
A real-world example could do map lookups in an LDAP directory or SQL database, or perform
other kinds of processing. You can even implement standard Sendmail maps like
virtusertable, mailertable, access_db, etc. using SOCKETMAP.
TICK REQUESTS
If you supply the -X option to mimedefang-multiplexor, then every so often, a "tick"
request is sent to a free worker. If your filter defines a function called filter_tick,
then this function is called with a single argument: the tick type. If you run multiple
parallel ticks, then each tick has a type ranging from 0 to n-1, where n is the number of
parallel ticks. If you're only running one tick request, then the argument to filter_tick
is always 0.
You can use this facility to run periodic tasks from within MIMEDefang. Note, however,
that you have no control over which worker is picked to run filter_tick. Also, at most
one filter_tick call with a particular "type" argument will be active at any time, and if
there are no free workers when a tick would occur, the tick is skipped.
SUPPORTED VIRUS SCANNERS
The following virus scanners are supported by MIMEDefang:
o Symantec CarrierScan Server (http://www.symantec.com/region/can/eng/product/scs/)
o Trend Micro vscan (http://www.antivirus.com/)
o Sophos Sweep (http://www.sophos.com/products/antivirus/savunix.html)
o H+BEDV AntiVir (http://www.hbedv.com/)
o Central Command Vexira (http://www.centralcommand.com/)
o NAI uvscan (http://www.nai.com)
o Bitdefender bdc (http://www.bitdefender.com)
o Norman Virus Control (NVCC) (http://www.norman.no/)
o Command csav (http://www.commandsoftware.com)
o F-Secure fsav (http://www.f-secure.com)
o The clamscan command-line scanner and the clamd daemon from Clam AntiVirus
(http://www.clamav.net/)
o Kaspersky Anti-Virus (AVP) (http://www.kaspersky.com/)
o F-Risk F-Prot (http://www.f-prot.com/)
o F-Risk F-Prot v6 (http://www.f-prot.com/)
o F-Risk FPROTD (daemonized version of F-Prot)
o Symantec CarrierScan Server
(http://www.symantec.ca/region/can/eng/product/scs/buymenu.html)
o Sophie (http://www.vanja.com/tools/sophie/), which uses the libsavi library from
Sophos, is supported in daemon-scanning mode.
o Trophie (http://www.vanja.com/tools/trophie/), which uses the libvsapi library from
Trend Micro, is supported in daemon-scanning mode.
o ESET NOD32 (http://www.eset.com/)
AUTHORS
mimedefang was written by Dianne Skoll <dfs@roaringpenguin.com>. The mimedefang home page
is http://www.mimedefang.org/.
SEE ALSO
mimedefang(8), mimedefang.pl(8)