Provided by: swift-object-expirer_2.29.2-0ubuntu1_all bug

NAME

       object-expirer.conf - configuration file for the OpenStack Swift object expirer daemon

SYNOPSIS

       object-expirer.conf

DESCRIPTION

       This is the configuration file used by the object expirer daemon. The daemon's function is
       to query the internal hidden expiring_objects_account to discover objects that need to  be
       deleted and to then delete them.

       The  configuration  file  follows  the python-pastedeploy syntax. The file is divided into
       sections, which are enclosed by square brackets.  Each  section  will  contain  a  certain
       number of key/value parameters which are described later.

       Any line that begins with a '#' symbol is ignored.

       You   can   find   more  information  about  python-pastedeploy  configuration  format  at
       http://pythonpaste.org/deploy/#config-format

GLOBAL SECTION

       This is indicated by section named [DEFAULT]. Below are the parameters that are acceptable
       within this section.

       swift_dir
              Swift configuration directory. The default is /etc/swift.

       user   The system user that the object server will run as. The default is swift.

       log_name
              Label used when logging. The default is swift.

       log_facility
              Syslog log facility. The default is LOG_LOCAL0.

       log_level
              Logging level. The default is INFO.

       log_address
              Logging address. The default is /dev/log.

       log_max_line_length
              The  following  caps the length of log lines to the value given; no limit if set to
              0, the default.

       log_custom_handlers
              Comma separated list of functions to call to setup custom log handlers.   functions
              get passed: conf, name, log_to_console, log_route, fmt, logger, adapted_logger. The
              default is empty.

       log_udp_host
              If set, log_udp_host will override log_address.

       log_udp_port
              UDP log port, the default is 514.

       log_statsd_host
              StatsD server. IPv4/IPv6 addresses and  hostnames  are  supported.  If  a  hostname
              resolves to an IPv4 and IPv6 address, the IPv4 address will be used.

       log_statsd_port
              The default is 8125.

       log_statsd_default_sample_rate
              The default is 1.

       log_statsd_sample_rate_factor
              The default is 1.

       log_statsd_metric_prefix
              The default is empty.

       nice_priority
              Modify  scheduling  priority  of  server  processes. Niceness values range from -20
              (most favorable to the process) to  19  (least  favorable  to  the  process).   The
              default does not modify priority.

       ionice_class
              Modify  I/O  scheduling  class  of  server processes. I/O niceness class values are
              IOPRIO_CLASS_RT (realtime),  IOPRIO_CLASS_BE  (best-effort)  and  IOPRIO_CLASS_IDLE
              (idle).   The  default  does  not  modify  class  and  priority.   Work  only  with
              ionice_priority.

       ionice_priority
              Modify I/O scheduling priority of server processes.  I/O  niceness  priority  is  a
              number  which goes from 0 to 7. The higher the value, the lower the I/O priority of
              the process. Work only with ionice_class.  Ignored if IOPRIO_CLASS_IDLE is set.

PIPELINE SECTION

       This is indicated by section name [pipeline:main].  Below  are  the  parameters  that  are
       acceptable within this section.

       pipeline
              It  is  used  when  you  need to apply a number of filters. It is a list of filters
              ended by an application. The default should be "catch_errors cache proxy-server"

APP SECTION

       This is indicated by section name [app:object-server]. Below are the parameters  that  are
       acceptable within this section.

       use    Entry  point  for  paste.deploy for the object server. This is the reference to the
              installed python egg.  The default is egg:swift#proxy. See proxy-server.conf-sample
              for options or See proxy-server.conf manpage.

       nice_priority
              Modify  scheduling  priority  of  server  processes. Niceness values range from -20
              (most favorable to the process) to  19  (least  favorable  to  the  process).   The
              default does not modify priority.

       ionice_class
              Modify  I/O  scheduling  class  of  server processes. I/O niceness class values are
              IOPRIO_CLASS_RT (realtime),  IOPRIO_CLASS_BE  (best-effort)  and  IOPRIO_CLASS_IDLE
              (idle).   The  default  does  not  modify  class  and  priority.   Work  only  with
              ionice_priority.

       ionice_priority
              Modify I/O scheduling priority of server processes.  I/O  niceness  priority  is  a
              number  which goes from 0 to 7. The higher the value, the lower the I/O priority of
              the process. Work only with ionice_class.  Ignored if IOPRIO_CLASS_IDLE is set.

FILTER SECTION

       Any section that has its name prefixed by "filter:" indicates a filter  section.   Filters
       are  used  to  specify configuration parameters for specific swift middlewares.  Below are
       the filters available and respective acceptable parameters.

       [filter:cache]

       Caching middleware that manages caching in swift.

          use    Entry point for paste.deploy for the memcache middleware. This is the  reference
                 to  the  installed  python  egg.   The default is egg:swift#memcache. See proxy-
                 server.conf-sample for options or See proxy-server.conf manpage.

       [filter:catch_errors]

          use    Entry point for paste.deploy  for  the  catch_errors  middleware.  This  is  the
                 reference  to  the installed python egg.  The default is egg:swift#catch_errors.
                 See proxy-server.conf-sample for options or See proxy-server.conf manpage.

       [filter:proxy-logging]

       Logging for the proxy server now lives in this middleware.  If the access_* variables  are
       not set, logging directives from [DEFAULT] without "access_" will be used.

          use    Entry  point  for  paste.deploy  for  the  proxy_logging middleware. This is the
                 reference    to    the    installed    python    egg.     This    is    normally
                 egg:swift#proxy_logging.  See proxy-server.conf-sample for options or See proxy-
                 server.conf manpage.

OBJECT EXPIRER SECTION

       [object-expirer]

          interval
                 Replaces run_pause with the more standard "interval", which means the replicator
                 won't pause unless it takes less than the interval set. The default is 300.

          auto_create_account_prefix [deprecated]
                 The default is ".". Should be configured in swift.conf instead.

          expiring_objects_account_name
                 The default is 'expiring_objects'.

          report_interval
                 The default is 300 seconds.

          request_tries
                 The number of times the expirer's internal client will attempt any given request
                 in the event of failure. The default is 3.

          concurrency
                 Number of expirer workers to spawn. The default is 1.

          processes
                 Processes is how many parts to divide the work into, one part per  process  that
                 will  be  doing  the  work.  Processes set 0 means that a single process will be
                 doing all the work.  Processes can also be specified on  the  command  line  and
                 will override the config value.  The default is 0.

          process
                 Process is which of the parts a particular process will work on process can also
                 be specified on the command line and will override the config value  process  is
                 "zero  based",  if  you  want  to use 3 processes, you should run processes with
                 process set to 0, 1, and 2. The default is 0.

          reclaim_age
                 The expirer will re-attempt expiring if the source object is not available up to
                 reclaim_age  seconds  before it gives up and deletes the entry in the queue. The
                 default is 604800 seconds.

          recon_cache_path
                 Path to recon cache directory. The default is /var/cache/swift.

          nice_priority
                 Modify scheduling priority of server processes. Niceness values range  from  -20
                 (most  favorable  to  the  process) to 19 (least favorable to the process).  The
                 default does not modify priority.

          ionice_class
                 Modify I/O scheduling class of server processes. I/O niceness class  values  are
                 IOPRIO_CLASS_RT  (realtime), IOPRIO_CLASS_BE (best-effort) and IOPRIO_CLASS_IDLE
                 (idle).  The default does  not  modify  class  and  priority.   Work  only  with
                 ionice_priority.

          ionice_priority
                 Modify  I/O  scheduling priority of server processes. I/O niceness priority is a
                 number which goes from 0 to 7. The higher the value, the lower the I/O  priority
                 of  the  process.  Work only with ionice_class.  Ignored if IOPRIO_CLASS_IDLE is
                 set.

DOCUMENTATION

       More in depth documentation about the swift-object-expirer and also OpenStack Swift  as  a
       whole   can   be  found  at  https://docs.openstack.org/swift/latest/admin_guide.html  and
       https://docs.openstack.org/swift/latest/

SEE ALSO

       swift-proxy-server.conf(5),