Provided by: schroot_1.6.10-12ubuntu3.1_amd64 bug

NAME

       schroot.conf - chroot definition file for schroot

DESCRIPTION

       schroot.conf  is  a  plain  UTF-8 text file, describing the chroots available for use with
       schroot.

       Comments are introduced following a ‘#’ (“hash”) character at the beginning of a line,  or
       following any other text.  All text right of the ‘#’ is treated as a comment.

       The  configuration  format  is  an  INI-style format, split into groups of key-value pairs
       separated by section names in square brackets.

   General options
       A chroot is defined as a group of key-value pairs, which is started by a  name  in  square
       brackets on a line by itself.  The file may contain multiple groups which therefore define
       multiple chroots.

       A chroot definition is started by the name of the chroot in square brackets.  For example,

              [sid]

       The name is subject to certain naming restrictions.  For further details, see the  section
       “Chroot Names” below.

       This is then followed by several key-value pairs, one per line:

       type=type
              The  type of the chroot.  Valid types are ‘plain’, ‘directory’, ‘file’, ‘loopback’,
              ‘block-device’, ‘btrfs-snapshot’, ‘zfs-snapshot’ and ‘lvm-snapshot’.  If  empty  or
              omitted,  the  default type is ‘plain’.  Note that ‘plain’ chroots do not run setup
              scripts and mount filesystems; ‘directory’  is  recommended  for  normal  use  (see
              “Plain and directory chroots”, below).

       description=description
              A  short description of the chroot.  This may be localised for different languages;
              see the section “Localisation” below.

       priority=number
              Set the priority of a chroot.  number is a positive integer  indicating  whether  a
              distribution  is  older  than  another.   For  example, “oldstable” and “oldstable-
              security” might be ‘0’, while “stable” and “stable-security” are ‘1’, “testing”  is
              ‘2’  and  “unstable”  is  ‘3’.   The  values  are not important, but the difference
              between them is.  This option is deprecated and no longer used by schroot,  but  is
              still permitted to be used; it will be obsoleted and removed in a future release.

       message-verbosity=verbosity
              Set  the verbosity of messages printed by schroot when setting up, running commands
              and cleaning up the chroot.  Valid settings are ‘quiet’ (suppress  most  messages),
              ‘normal’  (the  default)  and  ‘verbose’  (show  all  messages).   This  setting is
              overridden by the options --quiet and --verbose.

       users=user1,user2,...
              A comma-separated list of users which are allowed access to the chroot.   If  empty
              or  omitted, no users will be allowed access (unless a group they belong to is also
              specified in groups).

       groups=group1,group2,...
              A comma-separated list of groups which are allowed access to the chroot.  If  empty
              or omitted, no groups of users will be allowed access.

       root-users=user1,user2,...
              A  comma-separated list of users which are allowed password-less root access to the
              chroot.  If empty or omitted, no users  will  be  allowed  root  access  without  a
              password  (but  if  a  user  or  a  group  they  belong  to  is in users or groups,
              respectively, they may gain access with a password).  See  the  section  “Security”
              below.

       root-groups=group1,group2,...
              A comma-separated list of groups which are allowed password-less root access to the
              chroot.  If empty or omitted, no users  will  be  allowed  root  access  without  a
              password  (but  if  a  user  or  a  group  they  belong  to  is in users or groups,
              respectively, they may gain access with a password).  See  the  section  “Security”
              below.

       aliases=alias1,alias2,...
              A  comma-separated list of aliases (alternate names) for this chroot.  For example,
              a chroot named “sid” might have an ‘unstable’ alias for convenience.   Aliases  are
              subject to the same naming restrictions as the chroot name itself.

       profile=directory

       script-config=filename
              The  behaviour  of the chroot setup scripts may be customised on a per-chroot basis
              by setting  a  specific  configuration  profile.   The  directory  is  relative  to
              /etc/schroot.   The  default is ‘default’.  The files in this directory are sourced
              by the setup scripts, and so their behaviour may be  customised  by  selecting  the
              appropriate profile.  Alternatives are ‘minimal’ (minimal configuration), ‘desktop’
              (for running desktop applications in the chroot, making more functionality from the
              host  system available in the chroot) and ‘sbuild’ (for using the chroot for Debian
              package building).  Other packages may provide additional  profiles.   The  default
              values    of    the    keys    setup.config,   setup.copyfiles,   setup.fstab   and
              setup.nssdatabases are set based upon the profile setting.

              Note that the profile key replaces the older script-config key.  The  script-config
              key  is exactly the same as profile, but has “/config” appended to it.  The default
              filename is ‘default/config’.  Either of these keys  may  be  used.   If  both  are
              present,   then  script-config  will  take  precedence  (profile  will  be  unset).
              script-config is deprecated and will be removed in a  future  release.   Note  that
              profile  is  equivalent  to script-config if the file sourced by script-config only
              contains the standard variables provided by schroot; if any additional variables or
              shell  script  fragments  have been added, please also set setup.config, which will
              continue to allow this file to be sourced.  It is recommended to replace the use of
              the  sourced  file with additional keys in schroot.conf where possible, but it will
              continue  to  be  possible  to  source  an  additional  configuration  file   using
              setup.config.

              Desktop  users  should  note that the fstab file desktop/fstab will need editing if
              you use gdm3; please see the comments in this file for further  instructions.   The
              preserve-environment  key  should  also be set to ‘true’ so that the environment is
              preserved inside the chroot.

              If none of the configuration profiles provided above meet your needs, then they may
              be  edited  to  further  customise  them,  and/or copied and used as a template for
              entirely new profiles.

              Note that the different profiles have  different  security  implications;  see  the
              section “Security” below for further details.

       setup.config=filename
              This  key  specifies  a file which the setup scripts will source when they are run.
              This defaults to the same value as set by script-config.   The  file  is  a  Bourne
              shell  script,  and in consequence may contain any valid shell code, in addition to
              simple variable assignments.   This  will,  for  example,  allow  behaviour  to  be
              customised  according  to  the  specific chroot type or name.  Note that the script
              will be sourced once for each and every script invocation, and must be idempotent.

              All the default settings in this file are now settable using configuration keys  in
              schroot.conf, as detailed below.  Existing configurations should be modified to use
              these keys in  place  of  this  file.   See  schroot-script-config(5)  for  further
              details.   This  type  of  setup script configuration file is no longer provided as
              part of the standard profiles, but will continue to be sourced if present and  this
              key is set.

       setup.copyfiles=filename
              A file containing a list of files to copy into the chroot (one file per line).  The
              file will have the same absolute location inside the chroot.

       setup.fstab=filename
              The filesystem table file to be used to mount filesystems within the  chroot.   The
              format  of  this  file  is the same as for /etc/fstab, documented in fstab(5).  The
              only difference is that the mountpoint path  fs_dir  is  relative  to  the  chroot,
              rather  than  the  root.  Also note that mountpoints are canonicalised on the host,
              which will ensure that absolute symlinks point inside the chroot, but complex paths
              containing  multiple symlinks may be resolved incorrectly; it is inadvisable to use
              nested symlinks as mountpoints.

       setup.nssdatabases=filename
              A file listing the system databases to copy into the chroot.  The default databases
              are  ‘passwd’,  ‘shadow’,  ‘group’  and ‘gshadow’.  Other potential databases which
              could be added include  ‘services’,  ‘protocols’,  ‘networks’,  and  ‘hosts’.   The
              databases   are   copied   using  getent(1)  so  all  database  sources  listed  in
              /etc/nsswitch.conf will be used for each database.

       setup.services=service1,service2,...
              A comma-separated list of services to run in the chroot.   These  will  be  started
              when the session is started, and stopped when the session is ended.

       command-prefix=command,option1,option2,...
              A  comma-separated list of a command and the options for the command.  This command
              and its options will be prefixed to all commands run inside the  chroot.   This  is
              useful  for  adding commands such as nice, ionice or eatmydata for all commands run
              inside the chroot.  nice and ionice will affect CPU and I/O scheduling.   eatmydata
              ingores  filesystem  fsync operations, and is useful for throwaway snapshot chroots
              where you don't care about dataloss, but do care about high speed.

       personality=persona
              Set the personality (process execution domain) to use.  This option is useful  when
              using  a  32-bit  chroot on 64-bit system, for example.  Valid options on Linux are
              ‘bsd’,  ‘hpux’,  ‘irix32’,  ‘irix64’,  ‘irixn32’,  ‘iscr4’,   ‘linux’,   ‘linux32’,
              ‘linux_32bit’,  ‘osf4’,  ‘osr5’,  ‘riscos’,  ‘scorvr3’, ‘solaris’, ‘sunos’, ‘svr4’,
              ‘uw7’, ‘wysev386’, and ‘xenix’.  The default value is ‘linux’.  There is  also  the
              special  option ‘undefined’ (personality not set).  For a 32-bit chroot on a 64-bit
              system, ‘linux32’ is the option required.  The  only  valid  option  for  non-Linux
              systems is ‘undefined’.  The default value for non-Linux systems is ‘undefined’.

       preserve-environment=true|false
              By  default,  the  environment  will  not be preserved inside the chroot, instead a
              minimal environment will be used.  Set to true to always preserve the  environment.
              This  is  useful  for  example when running X applications inside the chroot, which
              need the environment to function correctly.  The environment may also be  preserved
              using the --preserve-environment option.

       shell=shell
              When running a login shell a number of potential shells will be considered, in this
              order: the command in the SHELL environment variable (if --preserve-environment  is
              used,  or  preserve-environment  is  enabled),  the  user's  shell  in the ‘passwd’
              database, /bin/bash and finally /bin/sh.  This setting  overrides  this  list,  and
              will use the shell specified.  It may be overridden using the --shell option.

       environment-filter=regex
              The  environment  to  be  set  in  the  chroot  will be filtered in order to remove
              environment variables which may pose a security  risk.   Any  environment  variable
              matching  the  specified POSIX extended regular expression will be removed prior to
              executing any command in the chroot.

              Potentially dangerous environment variables are removed for safety by default using
              the following regular expression: “^(BASH_ENV|CDPATH|ENV|HOSTALIASES|IFS
              |KRB5_CONFIG|KRBCONFDIR|KRBTKFILE|KRB_CONF|LD_.*|LOCALDOMAIN|NLSPATH|PATH_LOCALE
              |RES_OPTIONS|TERMINFO|TERMINFO_DIRS|TERMPATH)$”.

   Plain and directory chroots
       Chroots  of type ‘plain’ or ‘directory’ are directories accessible in the filesystem.  The
       two types are equivalent except for the fact that directory  chroots  run  setup  scripts,
       whereas  plain  chroots do not.  In consequence, filesystems such as /proc are not mounted
       in plain chroots; it is the responsibility of the system administrator to  configure  such
       chroots  by  hand,  whereas directory chroots are automatically configured.  Additionally,
       directory chroots implement the filesystem union chroot  options  (see  “Filesystem  Union
       chroot options”, below).

       These chroot types have an additional (mandatory) configuration option:

       directory=directory
              The  directory  containing  the chroot environment.  This is where the root will be
              changed to when executing a login shell or a command.  The directory must exist and
              have  read and execute permissions to allow users access to it.  Note that on Linux
              systems it will be bind-mounted elsewhere for use as a chroot;  the  directory  for
              ‘plain’  chroots  is  mounted  with  the  --rbind  option  to  mount(8),  while for
              ‘directory’ chroots --bind is used instead so that  sub-mounts  are  not  preserved
              (they should be set in the fstab file just like in /etc/fstab on the host).

   File chroots
       Chroots  of  type  ‘file’ are files on the current filesystem containing an archive of the
       chroot files.  They implement the source chroot  options  (see  “Source  chroot  options”,
       below).  Note that a corresponding source chroot (of type ‘file’) will be created for each
       chroot of this type; this is for convenient access to the source  archive,  e.g.  for  the
       purpose of updating. These additional options are also implemented:

       file=filename
              The  file  containing  the archived chroot environment (mandatory).  This must be a
              tar (tape archive), optionally compressed with gzip, bzip2, xz, lzop or  lz4.   The
              file  extensions  used  to determine the type are .tar, .tar.gz, .tar.bz2, .tar.xz,
              .tar.lzop, .tar.lz4, .tgz, .tbz, .txz, .tzo and .tlz4.  This file must be owned  by
              the  root user, and not be writable by other.  Note that zip archives are no longer
              supported; zip was not able to archive named pipes and device  nodes,  so  was  not
              suitable for archiving chroots.

       location=path
              This  is  the  path  to the chroot inside the archive.  For example, if the archive
              contains a chroot in /squeeze, you would specify “/squeeze” here.  If the chroot is
              the  only  thing in the archive, i.e. / is the root filesystem for the chroot, this
              option should be left blank, or omitted entirely.

   Loopback chroots
       Chroots of type ‘loopback’ are a filesystem available as a file on disk,  accessed  via  a
       loopback  mount.   The  file  will  be loopback mounted and unmounted on demand.  Loopback
       chroots implement the mountable chroot and filesystem union chroot options (see “Mountable
       chroot options” and “Filesystem Union chroot options”, below), plus an additional option:

       file=filename
              This  is the filename of the file containing the filesystem, including the absolute
              path.  For example “/srv/chroot/sid”.

   Block device chroots
       Chroots of type ‘block-device’ are a filesystem available on an  unmounted  block  device.
       The  device  will  be mounted and unmounted on demand.  Block device chroots implement the
       mountable chroot and filesystem union chroot options (see “Mountable chroot  options”  and
       “Filesystem Union chroot options”, below), plus an additional option:

       device=device
              This  is  the  device  name  of the block device, including the absolute path.  For
              example, “/dev/sda5”.

   Btrfs snapshot chroots
       Chroots of type ‘btrfs-snapshot’ are a Btrfs  snapshot  created  from  an  existing  Btrfs
       subvolume  on  a  mounted  Btrfs  filesystem.  A snapshot will be created from this source
       subvolume on demand at the start of a session, and then the snapshot will be mounted.   At
       the  end  of  the  session,  the snapshot will be unmounted and deleted.  This chroot type
       implements the source chroot options (see “Source chroot options”, below).   Note  that  a
       corresponding  source chroot (of type ‘directory’) will be created for each chroot of this
       type; this is for convenient access to the source volume.  These  additional  options  are
       also implemented:

       btrfs-source-subvolume=directory
              The directory containing the source subvolume.

       btrfs-snapshot-directory=directory
              The directory in which to store the snapshots of the above source subvolume.

   ZFS snapshot chroots
       Chroots  of  type  ‘zfs-snapshot’ are a ZFS clone created from an existing ZFS dataset.  A
       snapshot and clone will be created from this source subvolume on demand at the start of  a
       session, and then the clone will be mounted.  At the end of the session, the clone will be
       unmounted and the clone and snapshot will be deleted.  This  chroot  type  implements  the
       source  chroot  options  (see  “Source chroot options”, below).  Note that a corresponding
       source chroot (of type ‘directory’) will be created for each chroot of this type; this  is
       for convenient access to the source volume. These additional options are also implemented:

       zfs-dataset=dataset_name
              Name of the ZFS source dataset to use.

       zfs-snapshot-options=snapshot_options
              Snapshot options.  These are additional options to pass to zfs snapshot.

   LVM snapshot chroots
       Chroots  of  type ‘lvm-snapshot’ are a filesystem available on an LVM logical volume (LV).
       A snapshot LV will be created from this LV on  demand,  and  then  the  snapshot  will  be
       mounted.  At the end of the session, the snapshot LV will be unmounted and removed.

       LVM  snapshot  chroots  implement  the source chroot options (see “Source chroot options”,
       below), and all the options for ‘block-device’.  Note that a corresponding  source  chroot
       (of  type  ‘block-device’)  will  be  created  for  each  chroot of this type; this is for
       convenient access to the source device. This additional option is also implemented:

       lvm-snapshot-options=snapshot_options
              Snapshot options.  These are  additional  options  to  pass  to  lvcreate(8).   For
              example,  “-L  2g” to create a snapshot 2 GiB in size.  Note: the LV name (-n), the
              snapshot option (-s) and the original LV path may not be specfied  here;  they  are
              set automatically by schroot.

   Custom chroots
       Chroots  of type ‘custom’ are a special type of chroot, used for implementing new types of
       chroot not supported  by  any  of  the  above  chroot  types.   This  may  be  useful  for
       implementing  and  testing  a  new  chroot  type  without  needing  to write any C++ code.
       However, you will need to write your own setup script to  do  the  setup  work,  since  by
       itself  this  chroot type does very little.  You will also need to add custom keys to your
       chroot definition for use in the setup script; unlike  the  configuration  for  the  above
       chroot  types,  no  validation of the options will take place unless you do it yourself in
       your custom setup script.  These additional options are also implemented:

       custom-session-cloneable=true|false
              Set whether or not sessions may be cloned using this chroot (enabled by default).

       custom-session-purgeable=true|false
              Set whether or not sessions may be cloned using this chroot (disabled by default).

       custom-source-cloneable=true|false
              Set whether or not source chroots may be cloned  using  this  chroot  (disabled  by
              default).

   Source chroot options
       The  ‘btrfs-snapshot’,  ‘file’  and  ‘lvm-snapshot’ chroot types implement source chroots.
       Additionally, chroot types with  union  support  enabled  implement  source  chroots  (see
       “Filesystem Union chroot options”, below).  These are chroots which automatically create a
       copy  of  themselves  before  use,  and  are  usually  session  managed.   These   chroots
       additionally  provide an extra chroot in the source: namespace, to allow convenient access
       to the original (non-snapshotted) data, and to aid in  chroot  maintenance.   I.e.  for  a
       chroot named wheezy (chroot:wheezy), a corresponding source:wheezy chroot will be created.
       For compatibility with older versions of schroot  which  did  not  support  namespaces,  a
       chroot with a -source suffix appended to the chroot name will be created in addition (i.e.
       wheezy-source using the above example).  Note  that  these  compatibility  names  will  be
       removed in schroot 1.5.0, so the use of the source: namespace is preferred over the use of
       the -source suffix form.  See schroot(1) for further details.

       These chroots provide the following additional options:

       source-clone=true|false
              Set whether the source chroot should be automatically  cloned  (created)  for  this
              chroot.  The default is true to automatically clone, but if desired may be disabled
              by setting to false.  If disabled, the source chroot will be inaccessible.

       source-users=user1,user2,...
              A comma-separated list of users which are allowed access to the source chroot.   If
              empty  or  omitted,  no  users  will be allowed access.  This will become the users
              option in the source chroot.

       source-groups=group1,group2,...
              A comma-separated list of groups which are allowed access to the source chroot.  If
              empty  or  omitted,  no  users will be allowed access.  This will become the groups
              option in the source chroot.

       source-root-users=user1,user2,...
              A comma-separated list of users which are allowed password-less root access to  the
              source chroot.  If empty or omitted, no users will be allowed root access without a
              password (but if a user is in users, they may gain access with a  password).   This
              will become the root-users option in the source chroot.  See the section “Security”
              below.

       source-root-groups=group1,group2,...
              A comma-separated list of groups which are allowed password-less root access to the
              source chroot.  If empty or omitted, no users will be allowed root access without a
              password (but if a user's  group  is  in  groups,  they  may  gain  access  with  a
              password).   This will become the root-groups option in the source chroot.  See the
              section “Security” below.

   Mountable chroot options
       The ‘block-device’, ‘loopback’ and ‘lvm-snapshot’ chroot types implement device  mounting.
       These  are  chroots  which require the mounting of a device in order to access the chroot.
       These chroots provide the following additional options:

       mount-options=options
              Mount options for the block device.   These  are  additional  options  to  pass  to
              mount(8).  For example, “-o atime,sync,user_xattr”.

       location=path
              This  is  the path to the chroot inside the filesystem on the device.  For example,
              if the filesystem contains a chroot in /chroot/sid, you would specify “/chroot/sid”
              here.   If  the  chroot  is  the  only  thing on the filesystem, i.e. / is the root
              filesystem for the chroot, this option should be left blank, or omitted entirely.

   Filesystem Union chroot options
       The ‘block-device’, ‘directory’ and ‘loopback’ chroot types allow for the  creation  of  a
       session  using  filesystem  unions  to  overlay  the  original  filesystem with a separate
       writable directory.  The original filesystem is read-only, with any modifications made  to
       the  filesystem  made in the overlying writable directory, leaving the original filesystem
       unchanged.  A union permits multiple sessions to access  and  make  changes  to  a  single
       chroot  simultaneously, while keeping the changes private to each session.  To enable this
       feature, set union-type to any supported value.  If enabled, the chroot  will  also  be  a
       source chroot, which will provide additional options (see “Source chroot options”, above).
       All entries are optional.

       union-type=type
              Set the  union  filesystem  type.   Currently  supported  filesystems  are  ‘aufs’,
              ‘overlayfs’,  ‘overlay’  (as  of Linux 4.0+) and ‘unionfs’.  The default is ‘none’,
              which disables this feature.

       union-mount-options=options
              Union filesystem mount options (branch configuration), used for mounting the  union
              filesystem  specified  with union-type.  This replaces the complete “-o” string for
              mount and allows for the creation of complex filesystem unions.  Note that  ‘aufs’,
              ‘overlayfs’  and  ‘unionfs’ each have different supported mount options.  Note: One
              can     use     the     variables      “${CHROOT_UNION_OVERLAY_DIRECTORY}”      and
              “${CHROOT_UNION_UNDERLAY_DIRECTORY}”  to  refer  to  the  writable  overlay session
              directory and read-only underlying directory which are  to  form  the  union.   See
              schroot-setup(5) for a complete variable list.

       union-overlay-directory=directory
              Specify  the  directory  where  the  writeable  overlay session directories will be
              created.  The default is ‘/var/lib/schroot/union/overlay’.

       union-underlay-directory=directory
              Specify the directory where the read-only underlying directories will  be  created.
              The default is ‘/var/lib/schroot/union/underlay’.

   Customisation
       In  addition  to  the  configuration keys listed above, it is possible to add custom keys.
       These keys will be used to add  additional  environment  variables  to  the  setup  script
       environment  when  setup  scripts  are  run.   The  only  restriction is that the key name
       consists only of alphanumeric characters and hyphens, begins with  an  alphabet  character
       and  contains  at  least one period.  That is to say, that it matches the extended regular
       expression “^([a-z][a-z0-9]*\.)+[a-z][a-z0-9-]*$”.

       For example:
              debian.apt-update=true
              debian.distribution=unstable

       would set the following environment:
              DEBIAN_APT_UPDATE=true
              DEBIAN_DISTRIBUTION=unstable

       Note that it is an error to use different key names which would set the  same  environment
       variable by mixing periods and hyphens.

       Custom  configuration  keys  may  also  be  modified at runtime using the --option option.
       However, for security, only selected keys may be modified.  These keys are specified using
       the following options:

       user-modifiable-keys=key1,key2,..
              Set the keys which users may modify using --option.

       root-modifiable-keys=key1,key2,.. Set the keys which the
              root  user  may  modify  using  --option.  Note that the root user may use the keys
              specified in user-modifiable-keys in addition to those specified here.

   Localisation
       Some keys may be localised in multiple languages.  This is achieved by adding  the  locale
       name in square brackets after the key name.  For example:
              description[en_GB]=British English translation

       This will localise the description key for the en_GB locale.
              description[fr]=French translation

       This will localise the description key for all French locales.

CHROOT NAMES

       A  number  of  characters  or  words  are  not permitted in a chroot name, session name or
       configuration filename.  The name must begin with a lowercase or an uppercase letter, or a
       digit.   The  remaining  characters  may  additionally  be  dash  (‘-’),  period (‘.’), or
       underscore (‘_’).

       The rationale for these restrictions is as follows:

       Generic
              Unfortunately, not all the places that deal  with  chroot  names  can  handle  non-
              printable and other characters properly, and it's hard to update all of them.  This
              is mostly about the various shell scripts where it's also unwise to assume  authors
              always create safe code.

       ‘dpkg-old’
       ‘dpkg-dist’
       ‘dpkg-new’
       ‘dpkg-tmp’
              These  names  may  not  appear  at  the  end  of a name.  These are saved copies of
              conffiles used by the dpkg package manager, and will be ignored.

SECURITY

   Untrusted users
       Note that giving untrusted users root access  to  chroots  is  a  serious  security  risk!
       Although  the  untrusted  user  will  only have root access to files inside the chroot, in
       practice there are many obvious ways of breaking out  of  the  chroot  and  of  disrupting
       services on the host system.  As always, this boils down to trust.

       Do  not  give chroot root access to users you would not trust with root access to the host
       system.

   Profiles
       Depending upon which profile you have configured with the script-config option,  different
       filesystems will be mounted inside the chroot, and different files will be copied into the
       chroot from the host.  Some profiles will mount the host's /dev, while  others  will  not.
       Some  profiles  also  bind mount additional parts of the host filesystem in order to allow
       use of certain features, including user's home directories and  specific  parts  of  /var.
       Check  the  profile's  fstab  file  to  be  certain of what will be mounted, and the other
       profile files to see which files and system databases will  be  copied  into  the  chroot.
       Choose  a  different  profile or edit the files to further restrict what is made available
       inside the chroot.

       There is a tradeoff between security (keeping the  chroot  as  minimal  as  possible)  and
       usability  (which  sometimes  requires  access  to  parts  of  the  host filesystem).  The
       different profiles make different tradeoffs, and it is important  that  you  assess  which
       meets the security/usability tradeoff you require.

EXAMPLE

       # Sample configuration

       [sid]
       type=plain
       description=Debian unstable
       description[fr_FR]=Debian instable
       directory=/srv/chroot/sid
       priority=3
       users=jim
       groups=sbuild
       root-users=rleigh
       aliases=unstable,default

       [etch]
       type=block-device
       description=Debian testing (32-bit)
       priority=2
       groups=users
       #groups=sbuild-security
       aliases=testing
       device=/dev/hda_vg/etch_chroot
       mount-options=-o atime
       personality=linux32

       [sid-file]
       type=file
       description=Debian sid file-based chroot
       priority=3
       groups=sbuild
       file=/srv/chroots/sid.tar.gz

       [sid-snapshot]
       type=lvm-snapshot
       description=Debian unstable LVM snapshot
       priority=3
       groups=sbuild
       users=rleigh
       source-root-users=rleigh
       source-root-groups=admin
       device=/dev/hda_vg/sid_chroot
       mount-options=-o atime,sync,user_xattr
       lvm-snapshot-options=--size 2G

FILES

   Chroot definitions
       /etc/schroot/schroot.conf
              The  system-wide chroot definition file.  This file must be owned by the root user,
              and not be writable by other.

       /etc/schroot/chroot.d
              Additional chroot definitions may be placed in files under  this  directory.   They
              are  treated  in  exactly that same manner as /etc/schroot/schroot.conf.  Each file
              may contain one or more chroot definitions.

   Setup script configuration
       The directory /etc/schroot/default contains the default settings used by setup scripts.

       config Main configuration file read  by  setup  scripts.   The  format  of  this  file  is
              described   in  schroot-script-config(5).   This  is  the  default  value  for  the
              script-config key.  Note that this was formerly named /etc/schroot/script-defaults.
              The following files are referenced by default:

       copyfiles
              A  list  of files to copy into the chroot from the host system.  Note that this was
              formerly named /etc/schroot/copyfiles-defaults.

       fstab  A file in the format decribed in fstab(5), used to  mount  filesystems  inside  the
              chroot.   The mount location is relative to the root of the chroot.  Note that this
              was formerly named /etc/schroot/mount-defaults.

       nssdatabases
              System databases (as described in /etc/nsswitch.conf on GNU/Linux systems) to  copy
              into   the   chroot   from   the   host.    Note   that  this  was  formerly  named
              /etc/schroot/nssdatabases-defaults.

AUTHORS

       Roger Leigh.

COPYRIGHT

       Copyright © 2005-2012  Roger Leigh <rleigh@debian.org>

       schroot is free software: you can redistribute it and/or modify it under the terms of  the
       GNU  General Public License as published by the Free Software Foundation, either version 3
       of the License, or (at your option) any later version.

SEE ALSO

       sbuild(1), schroot(1), schroot-script-config(5), schroot-faq(7), mount(8).