Ubuntu Manpage: alsactl_init - alsa control management

Provided by: alsa-utils_1.2.6-1ubuntu1_amd64

NAME

       alsactl_init - alsa control management - initialization

DESCRIPTION

       "alsactl init" provides soundcard specific initialization.

CONFIGURATION

All "alsactl init" configuration files are placed in /usr/share/alsa/init/ directory. The
top level configuration file is /usr/share/alsa/init/00main. The default top-level file
can be also specified using -i or --initfile parameter for the alsactl tool. Every file
consists of a set of lines of text. All empty lines or lines beginning with '#' will be
ignored.

Rules files
The "alsactl init" rules are read from the files located in the /usr/share/alsa/init/*.
The top level configuration file is /usr/share/alsa/init/00main. Every line in the rules
file contains at least one key value pair. There are two kind of keys, match and
assignment keys. If all match keys are matching against its value, the rule gets applied
and the assign keys get the specified value assigned.

A rule may consists of a list of one or more key value pairs separated by a comma. Each
key has a distinct operation, depending on the used operator. Valid operators are:

==
Compare for equality.

!=
Compare for non-equality.

=
Assign a value to a key. Keys that represent a list, are reset and only this single
value is assigned.

+=
Add the value to a key that holds a list of entries.

:=
Assign a value to a key finally; disallow any later changes, which may be used to
prevent changes by any later rules.

The following key names can be used to match against device properties:

CARDINDEX
Match the card index of the ALSA driver.

CTL{attribute}
Set or test universal control attribute. Possible attributes:

numid
Numeric control identification.

iface, interface
Control interface name (CARD, HWEDEP, MIXER, PCM, RAWMIDI, TIMER, SEQUENCER)

subdev, subdevice
Subdevice number.

name
Control name

index
Control index

type
Control type (BOOLEAN, INTEGER, INTEGER64, ENUMERATED, BYTES, IEC958)

attr, attribute
Attributes (stored in a string - use match characters * and ?):

r
control is readable

w
control is writable

v
control is volatile

i
control is inactive

l
control is locked

R
control is TLV readable

W
control is TLV writable

C
control is TLV commandable

o
process is owner of this control

u
control created in user space

owner
Control owner process PID number

count
Control count of values

min
Value range - minimum value

max
Value range - maximum value

step
Value range - step value

dBmin
Value range - minimum dB value

dBmax
Value range - maximum dB value

items
Enumerated value - number of text items

enums
Enumerated value - list of text names stored between '|' character

value
Value of control stored to a string delimited by comma (,).

do_search
Search for a control. Value "1" is returned if a control was found. The CTL{name}
key might contain match characters * and ?. An control index might be specified as
first argument starting from zero (e.g. CTL{do_search 2}="1").

do_count
Search for a controls and return total count of matched ones. The CTL{name} key
might contain match characters * and ?.

CONFIG{sysfs_device}
The relative path to sysfs subsystem specifying the root directory of a soundcard
device. Usually, it should be set to "/class/sound/card$cardinfo{card}/device".

ATTR{filename}
Match sysfs attribute values of the soundcard device. The relative path to sysfs tree
must be defined by CONFIG{sysfs_device} key. Trailing whitespace in the attribute
values is ignored, if the specified match value does not contain trailing whitespace
itself. Depending on the type of operator, this key is also used to set the value of a
sysfs attribute.

ENV{key}
Match against the value of an environment variable. Up to five ENV keys can be
specified per rule. Depending on the type of operator, this key is also used to export
a variable to the environment.

PROGRAM
Execute external program. The key is true, if the program returns without exit code
zero. The whole event environment is available to the executed program. The program's
output printed to stdout is available for the RESULT key.

Several buildin commands are available:

__ctl_search
Search for a control. The CTL{name} key might contain match characters * and ?. An
control index might be specified as first argument starting from zero (e.g.
PROGRAM="__ctl_search 2").

__ctl_count
Search for a controls and return total count of matched ones. The CTL{name} key
might contain match characters * and ?.

RESULT
Match the returned string of the last PROGRAM call. This key can be used in the same
or in any later rule after a PROGRAM call.

Most of the fields support a shell style pattern matching. The following pattern
characters are supported:

*
Matches zero, or any number of characters.

?
Matches any single character.

[]
Matches any single character specified within the brackets. For example, the pattern
string 'tty[SR]' would match either 'ttyS' or 'ttyR'. Ranges are also supported within
this match with the '-' character. For example, to match on the range of all digits,
the pattern [0-9] would be used. If the first character following the '[' is a '!',
any characters not enclosed are matched.

The following keys can get values assigned:

CTL{numid}, CTL{iface}, CTL{device}, CTL{subdev}, CTL{name}, CTL{index},
Select universal control element.

CTL{value}
Value is set (written) also to soundcard's control device and RESULT key is set to
errno code. The result of set operation is always true (it means continue with next
key on line).

CTL{values}
Value is set (written) also to soundcard's control device (all control values are set
to specified value) and RESULT key is set to errno code. The result of set operation
is always true (it means continue with next key on line).

CTL{write}
Value is set (written) also to soundcard's control device (all control values are set
to specified value). The result of set operation is true when operation succeed (it
means continue with next key on line).

ENV{key}
Export a variable to the environment. Depending on the type of operator, this key is
also to match against an environment variable.

RESULT
Set RESULT variable. Note that PROGRAM also sets this variable, but setting this
variable manually might be useful to change code execution order (included files).

LABEL
Named label where a GOTO can jump to.

GOTO
Jumps to the next LABEL with a matching name. The goto cannot jump backward.

INCLUDE
Include the specified filename or files in specified directory.

When a directory is specified, only the files with the extension ".conf" are read.
Also they are read in the alphabetical order. Thus it's highly recommended to use some
number prefix (e.g. "01-something.conf") to assure the order of execucions.

ACCESS
Check if specified file or directory exists

CONFIG{sysfs_device}
The relative path to sysfs subsystem specifying the root directory of a soundcard
device. Usually, it should be set to "/class/sound/card$cardinfo{card}/device".

PRINT
PRINT value to stdout.

ERROR
PRINT value to stderr.

EXIT
Exit immediately and set program exit code to value (should be integer). If value is
"return" string, parser leaves current included file and returns to parent
configuration file.

The PROGRAM, RESULT, CTL{value}, PRINT, ERROR, EXIT, CONFIG{} fields support simple
printf-like string substitutions. It allows the use of the complete environment set by
earlier matching rules. For all other fields, substitutions are applied while the
individual rule is being processed. The available substitutions are:

$cardinfo{attribute}, %i{attribute}
See CARDINFO{} for more details.

$ctl{attribute}, %C{attribute}
See CTL{} for more details.

$attr{file}, %s{file}
The value of a sysfs attribute found at the device, where all keys of the rule have
matched. If the attribute is a symlink, the last element of the symlink target is
returned as the value.

$env{key}, %E{key}
The value of an environment variable.

$result, %c
The string returned by the external program requested with PROGRAM. A single part of
the string, separated by a space character may be selected by specifying the part
number as an attribute: %c{N}. If the number is followed by the '+' char this part
plus all remaining parts of the result string are substituted: %c{N+}

$sysfsroot, %r
Root directory where sysfs file-system is mounted. Ususally, this value is just
"/sys".

$config{key}, %g{key}
The value of a configuration variable. See CONFIG{} for more details.

%%
The '%' character itself.

$$
The '$' character itself.

The count of characters to be substituted may be limited by specifying the format length
value. For example, '%3s{file}' will only insert the first three characters of the sysfs
attribute

AUTHOR

       Written by Jaroslav Kysela <perex@perex.cz>

       Some portions are written by Greg Kroah-Hartman <greg@kroah.com> and Kay Sievers
       <kay.sievers@vrfy.org>.

NAME

DESCRIPTION

CONFIGURATION

AUTHOR

SEE ALSO