Ubuntu Manpage: dgit-sponsorship - tutorial for Debian upload sponsorship, using git

NAME

       dgit-sponsorship - tutorial for Debian upload sponsorship, using git

INTRODUCTION AND SCOPE

       This tutorial describes how a Debian sponsored contributor and a sponsoring DD (or DM) can collaborate
       and publish using git.

       The sponsor must be intending to use dgit for the upload.  (If the sponsor does not use dgit, it is not
       possible to properly publish a sponsee's git branch.)

       It is best if the sponsee also uses dgit; but also covered (later on) is the case where the sponsee
       provides a proposed upload in source package form, but the sponsor would like to work in git.

       This tutorial does not provide a checklist for the sponsor's review.  Both contributors are expected to
       be familiar with Debian packaging and Debian's processes, and with git.

SPONSEE WORKFLOW

This section is addressed to the sponsee:

General
You should prepare the package as if you were going to upload it with "dgit push-source" or "dgit push"
yourself.

For a straightforward NMU, consult dgit-nmu-simple(7).

If you are the (prospective) maintainer, you can adopt any suitable (dgit-compatible) git workflow. The
dgit-maint-*(7) tutorials describe some of the possibilities.

Upload preparation
You should go through all of the steps a self-uploading maintainer would do, including building for ad
hoc tests, and checking via a formal build (eg using "dgit sbuild") that the package builds on sid (or
the target release).

At the point where you would, if you were a DD, do the actual upload by running dgit push, you hand off
to your sponsor.

If you were going to use one of the "--quilt=" options to dgit, or "dgit --gbp" or "dgit --dpm", you must
specify that in your handoff email - see below.

git+origs based handoff
The elements of the handoff consists of:

• The git branch.

• Any .orig tarballs which will be needed, or sample git-archive(1) or gbp-buildpackage(1) command(s)
to generate them.

• A sample dgit push command, containing any dgit --quilt=, --gbp or --dpm option needed

• Plus of course all the usual information about the state of the package, any caveats or areas you
would like the sponsor to focus their review, constraints about upload timing, etc.

If the handoff is done by email, the elements above should be a in a single, signed, message. This could
be an RFS submission against the sponsorship-requests pseudo-package.

git branch

The sponsee should push their HEAD as a git branch to any suitable git server. They can use their
own git server; salsa is another possibility.

The branch names used by the sponsee on their local machine, and on the server, do not matter.

Instead, the sponsee should include the git commit id of their HEAD in their handover email.

orig tarballs

If there are any .origs that are not in the archive already, the sponsor will need them as part of
the upload.

If the sponsee generated these tarballs with git-archive(1) or gbp-buildpackage(1), they can simply
include a sample invocation of git-archive(1) or ensure that a suitable gbp.conf is present in the
source package to generate the tarball.

Otherwise, the simplest approach is to commit the orig tarballs with pristine-tar(1), e.g.

% pristine-tar commit ../foo_1.2.3.orig.tar.xz upstream/1.2.3

and be sure to push the pristine-tar branch. If you are using git-buildpackage(1), just pass
--git-pristine-tar and --git-pristine-tar-commit.

Alternatively, the sponsee can put them on a suitable webserver, or attach to the e-mail, if they are
small.

The sponsee should quote sha256sums of the .origs in their handoff email, unless they supplied
commands to generate them.

quilt options

Some workflows involve git branches which are not natively dgit-compatible. Normally dgit will
convert them as needed, during push.

Supply a sample "dgit push" command including any "--gbp" (aka "--quilt=gbp"), "--dpm" (aka
"--quilt=dpm"), or other "--quilt=" option they need to use. e.g.

% dgit --gbp push

SPONSOR WORKFLOW

This part is addressed to the sponsor:

Receiving and validating the sponsorship request
You should check the signature on the email.

Use "git fetch" or "git clone" to obtain the git branch prepared by your sponsee, and obtain any .origs
mentioned by the sponsee (to extract .origs committed with pristine-tar, you can use origtargz(1), or use
"gbp clone --pristine-tar".)

Check the git commit ID of the sponsee's branch tip, and the sha256sums of the .origs, against the
handoff email.

Now you can check out the branch tip, and do your substantive review.

Dealing with branches that want --quilt=
If your sponsee mentioned a "--quilt" option, and you don't want to grapple with their preferred tree
format, you can convert their tree into the standard dgit view:

% dgit -wgf --quilt=foo --dgit-view-save=unquilted quilt-fixup
% git checkout unquilted

You should check that what you're looking at is a descendant of the sponsee's branch.

Some hints which may help the review
"dgit fetch sid" will get you an up-to-date "refs/remotes/dgit/dgit/sid" showing what's in the archive
already.

"dgit -wgf --damp-run push-source" will check that dgit can build an appropriate source package.

There is no need to run debdiff. dgit will not upload anything that doesn't unpack to exactly the git
commit you are pushing, so you can rely on what you see in "git diff".

Doing the upload
When you have completed your source review, and use "dgit -wgf [--quilt=...] sbuild -A -C" or similar, to
to the build, and then "dgit -wgf [--quilt=...] push-source" or "dgit -wgf [--quilt=...] push" to do the
upload.

Check whether the sponsee made a debian/version tag. If they did, ensure you have their tag in the
repository you are pushing from, or pass "--no-dep14tag". This avoids identically named, non-identical
tags, which can be confusing.

(It is possible to upload from the quilt-cache dgit view. If you want to do this, do not pass the
"--quilt" or "--gbp" or "--dpm" options again, and do pass "--no-dep14tag", since the debian/version tag
should go on the sponsee's branch.)

If this was the first upload done with dgit, you may need to pass "--overwrite" to dgit.

Alternatively, if this was the first ever dgit push of the package, you can pass
"--deliberately-not-fast-forward" instead of "--overwrite". This avoids introducing a new origin commit
into the dgit view of the sponsee's git history which is unnecessary and could be confusing.

SPONSORING A NON-GIT-USING SPONSEE

       This part is addressed to the sponsor:

       If your sponsee does not use git, you can still do your review with git, and use dgit for the upload.

       Your sponsee will provide you with a source package: that is, a .dsc and the files it refers to.  Obtain
       these files, and check signatures as appropriate.  Then:

           % dgit clone PACKAGE
           % cd PACKAGE
           % dgit import-dsc /path/to/sponsee's.dsc +sponsee
           % git checkout sponsee

       Or for an entirely new package:

           % mkdir PACKAGE
           % cd PACKAGE
           % git init
           % dgit -pPACKAGE import-dsc /path/to/sponsee's.dsc +sponsee

       This will leave you looking at the sponsee's package, formatted as a dgit branch.

       When you have finished your review and your tests, you can do the dgit sbuild and dgit push directly from
       the "sponsee" branch.

       You will need to pass "--overwrite" to dgit push for every successive upload.  This disables a safety
       catch which would normally spot situations where changes are accidentally lost.  When your sponsee is
       sending you source packages - perhaps multiple source packages with the same version number - these
       safety catches are inevitably ineffective.

NAME

INTRODUCTION AND SCOPE

SPONSEE WORKFLOW

SPONSOR WORKFLOW

SPONSORING A NON-GIT-USING SPONSEE

SEE ALSO