NAME

       ocf_heartbeat_ovsmonitor - Monitors ovs bonding bonds

SYNOPSIS

       ovsmonitor [start | stop | status | monitor | meta-data | validate-all]

DESCRIPTION

       Monitor the vitality of a local ovs bond.

       You may set up this RA as a clone resource to monitor the network bonds on different
       nodes, with the same bond name. This is not related to the IP address or the network on
       which a bond is configured. You may use this RA to move resources away from a node, which
       has a faulty bond or prevent moving resources to such a node. This gives you independent
       control of the resources, without involving cluster intercommunication. But it requires
       your nodes to have more than one network bond.

       The resource configuration requires a monitor operation, because the monitor does the main
       part of the work. In addition to the resource configuration, you need to configure some
       location constraints, based on a CIB attribute value. The name of the attribute value is
       configured in the 'name' option of this RA.

       Example constraint configuration using crmsh location loc_connected_node my_resource_grp
       rule ="rule_loc_connected_node" -INF: ovsmonitor-bond-public eq 0

       Example constraint configuration using pcs. Only allow 'my_resource' to run on nodes where
       eth0 ethernet device is available. pcs constraint location my_resource rule
       score=-INFINITY ovsmonitor-bond-public ne 1

       The ethmonitor works in 3 different modes to test the bond vitality. 1. call ovs-appctl to
       see if at least one of the bonding's link status is up (if link is down -> error) 2. call
       ovs-ofctl and watch the RX counter (if packages come around in a certain time -> success)
       3. return error

SUPPORTED PARAMETERS

       bond
           The name of the network bond which should be monitored (e.g. bond-public).

           (unique, required, string, no default)

       bridge
           The name of the ovs bridge that contains the bridge.

           (unique, required, string, no default)

       name
           The name of the CIB attribute to set. This is the name to be used in the constraints.
           Defaults to "ovsmonitor-'bond_name'".

           (unique, optional, string, no default)

       multiplier
           Multiplier for the value of the CIB attriobute specified in parameter name.

           (optional, integer, default 1)

       repeat_count
           Specify how often the bond will be monitored, before the status is set to failed. You
           need to set the timeout of the monitoring operation to at least repeat_count *
           repeat_interval

           (optional, integer, default 5)

       repeat_interval
           Specify how long to wait in seconds between the repeat_counts.

           (optional, integer, default 10)

       pktcnt_timeout
           Timeout for the RX packet counter. Stop listening for packet counter changes after the
           given number of seconds.

           (optional, integer, default 5)

       link_status_only
           Only report success based on link status. Do not perform RX counter related
           connectivity tests.

           (optional, boolean, default false)

SUPPORTED ACTIONS

       This resource agent supports the following actions (operations):

       start
           Starts the resource. Suggested minimum timeout: 60s.

       stop
           Stops the resource. Suggested minimum timeout: 20s.

       status
           Performs a status check. Suggested minimum timeout: 60s. Suggested interval: 10s.

       monitor
           Performs a detailed status check. Suggested minimum timeout: 60s. Suggested interval:
           10s.

       meta-data
           Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5s.

       validate-all
           Performs a validation of the resource configuration. Suggested minimum timeout: 20s.

EXAMPLE CRM SHELL

       The following is an example configuration for a ovsmonitor resource using the crm(8)
       shell:

           primitive p_ovsmonitor ocf:heartbeat:ovsmonitor \
             params \
               bond=string \
               bridge=string \
             op monitor depth="0" timeout="60s" interval="10s"

EXAMPLE PCS

       The following is an example configuration for a ovsmonitor resource using pcs(8)

           pcs resource create p_ovsmonitor ocf:heartbeat:ovsmonitor \
             bond=string \
             bridge=string \
             op monitor OCF_CHECK_LEVEL="0" timeout="60s" interval="10s"

SEE ALSO

       http://clusterlabs.org/

AUTHOR

       ClusterLabs contributors (see the resource agent source for information about individual
       authors)