Provided by: cpl-plugin-xshoo-doc_3.5.3+dfsg-1build1_all 
NAME
xsh_scired_ifu_stare - Reduce science IFU stare exposures and build a 3D cube
SYNOPSIS
esorex xsh_scired_ifu_stare [OPTIONS] FILE.sof
DESCRIPTION
This recipe reduce science IFU stare exposures with 3D cube generation Input Frames :
- A set of n Science frames ( n == 1 or >=3, Tag = OBJECT_IFU_STARE_UVB)
- A spectral format table frame (Tag = SPECTRAL_FORMAT_TAB_arm)
- [UVB,VIS] A master bias frame (Tag = MASTER_BIAS_arm)
- A master dark frame (Tag = MASTER_DARK_arm)
- A master flat frame (Tag = MASTER_FLAT_IFU_arm)
- An order edges table frame(Tag = ORDER_TAB_EDGES_IFU_arm)
- [physmod] An AFC corrected model cfg frame (Tag = XSH_MOD_CFG_OPT_AFC_arm)
- [poly] An AFC corrected model wavesol frame (Tag = WAVE_TAB_AFC_arm)
- [OPTIONAL] A non-linear badpixel map (Tag = BP_MAP_NL_arm)
- [OPTIONAL] A reference badpixel map (Tag = BP_MAP_RP_arm) Products :
- Merged 3D data cube (PREFIX_MERGE3D_DATA_OBJ_arm)
- QC Traces of 3D data cube (PREFIX_MERGE3D_TRACE_OBJ_arm)
- Order by order 3D data cube (PREFIX_ORDER3D_DATA_OBJ_arm)
- Order by order 3D qual cube (IFU_CFG_COR_arm)
- Order by order 3D qual cube (PREFIX_MERGE3D_DATA_SKY_arm)
- where PREFIX is SCI, FLUX, TELL if input raw DPR.TYPE contains OBJECT or FLUX or
TELLURIC
OPTIONS
--keep-temp <str>
If ´no´, temporary files are deleted. (str; default: ´no´). The full name of this
option for the EsoRex configuration file is xsh.xsh_scired_ifu_stare.keep-temp
[default = no].
--debug-level <str>
Additional xshooter debug level. One of ´none´, ´low´, ´medium´, ´high´ (str;
default: ´none´). The full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.debug-level [default = none].
--time-stamp <bool>
Add timestamp to product file name. (bool; default: False). The full name of this
option for the EsoRex configuration file is xsh.xsh_scired_ifu_stare.time-stamp
[default = False].
--decode-bp <int>
Integer representation of the bits to be considered bad when decoding the bad pixel
mask pixel values. Most frequent codes relevant for the user: 0: good pixel,
8: pick-up noise, 16: cosmic-ray removed, 32: cosmic-ray unremoved, 128:
calibration file defect, 256: hot pixel, 512: dark pixel, 4096: A/D converted
saturation, 32768: non linear pixel, 1048576: extrapolated flux in NIR, 4194304:
Interpolated flux during extraction. (int; default: 2144337919). The full name of
this option for the EsoRex configuration file is xsh.xsh_scired_ifu_stare.decode-bp
[default = 2144337919].
--pre-overscan-corr <int>
pre-overscan correction. 0: no correction 1: mean overscan correction 2: mean
prescan correction 3: (mean pre+mean overscan)/2 correction (int; default: 1). The
full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.pre-overscan-corr [default = 1].
--stack-method <str>
Method used to build master frame. (str; default: ´median´). The full name of this
option for the EsoRex configuration file is xsh.xsh_scired_ifu_stare.stack-method
[default = median].
--klow <float>
Kappa used to clip low level values, when method is set to ´mean´ (float; default:
5.0). The full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.klow [default = 5.0].
--khigh <float>
Kappa used to clip high level values, when method is set to ´mean´ (float; default:
5.0). The full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.khigh [default = 5.0].
--crh-clip-kappa <float>
Kappa value in sigma clipping during CRH rejection using multiple frames (float;
default: 5.0). The full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.crh-clip-kappa [default = 5.0].
--crh-clip-niter <int>
Number of iterations in sigma clipping during CRH rejection using multiple frames
(int; default: 5). The full name of this option for the EsoRex configuration file
is xsh.xsh_scired_ifu_stare.crh-clip-niter [default = 5].
--crh-clip-frac <float>
Minimal ratio of points accepted / total in sigma clipping during CRH rejection
using multiple frames (float; default: 0.7). The full name of this option for the
EsoRex configuration file is xsh.xsh_scired_ifu_stare.crh-clip-frac [default =
0.7].
--background-edges-margin <int>
X margin to order edge to define background sampling points (int; default: 1). The
full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.background-edges-margin [default = 1].
--background-poly-deg-y <int>
Poly mode fit deg along Y. (int; default: 9). The full name of this option for the
EsoRex configuration file is xsh.xsh_scired_ifu_stare.background-poly-deg-y
[default = 9].
--background-poly-deg-x <int>
Poly mode fit deg along X. (int; default: 9). The full name of this option for the
EsoRex configuration file is xsh.xsh_scired_ifu_stare.background-poly-deg-x
[default = 9].
--background-poly-kappa <float>
Poly mode kappa value of kappa-sigma-clip outliers removal. (float; default: 10.0).
The full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.background-poly-kappa [default = 10.0].
--rectify-kernel <str>
Name of the Interpolation Kernel Used. Possible values are: tanh, sinc, sinc2,
lanczos, hamming, hann. (str; default: ´tanh´). The full name of this option for
the EsoRex configuration file is xsh.xsh_scired_ifu_stare.rectify-kernel [default =
tanh].
--rectify-radius <float>
Rectify Interpolation radius [bin units]. (float; default: 2.0). The full name of
this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.rectify-radius [default = 2.0].
--rectify-bin-lambda <float>
Wavelength step in the output spectrum [nm] (float; default: -1.0). The full name
of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.rectify-bin-lambda [default = -1.0].
--rectify-bin-slit <float>
Spatial step along the slit in the output spectrum [arcsec] (float; default: -1.0).
The full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.rectify-bin-slit [default = -1.0].
--compute-map <bool>
if TRUE recompute (wave and slit) maps from the dispersion solution. If
sky-subtract is set to TRUE this must be set to TRUE. (bool; default: False). The
full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.compute-map [default = False].
--trace-obj <bool>
if TRUE trace object position on each IFU slice. In this case order TAB edges is
required (bool; default: False). The full name of this option for the EsoRex
configuration file is xsh.xsh_scired_ifu_stare.trace-obj [default = False].
--check-afc <bool>
Input AFC corrected model/wave solution and science frame check. If TRUE the recipe
verify that the input mode/wave solution is AFC corrected, its INS.OPTIi.NAME is
´Pin_0.5 ´, and its OBS.ID and OBS.TARG.NAME values matches with the corresponding
values of the science frame. (bool; default: True). The full name of this option
for the EsoRex configuration file is xsh.xsh_scired_ifu_stare.check-afc [default =
True].
--cut-uvb-spectrum <bool>
TRUE if recipe cuts the UVB spectrum at 556 nm (dichroich) (bool; default: True).
The full name of this option for the EsoRex configuration file is
xsh.xsh_scired_ifu_stare.cut-uvb-spectrum [default = True].
Note that it is possible to create a configuration file containing these options, along
with suitable default values. Please refer to the details provided by the 'esorex --help'
command.
SEE ALSO
The full documentation for the xshoo pipeline can be downloaded as a PDF file using the
following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/xshoo/xshoo-pipeline-manual-12.1.pdf
An overview over the existing ESO pipelines can be found on the web page
https://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See
https://packages.python.org/python-cpl/index.html for further information.
The other recipes of the xshoo pipeline are xsh_2dmap(7), xsh_cfg_recover(7),
xsh_flexcomp(7), xsh_geom_ifu(7), xsh_lingain(7), xsh_mbias(7), xsh_mdark(7),
xsh_mflat(7), xsh_orderpos(7), xsh_predict(7), xsh_respon_slit_nod(7),
xsh_respon_slit_offset(7), xsh_respon_slit_stare(7), xsh_scired_ifu_offset(7),
xsh_scired_ifu_offset_drl(7), xsh_scired_ifu_stare_drl(7), xsh_scired_slit_nod(7),
xsh_scired_slit_offset(7), xsh_scired_slit_stare(7), xsh_util_physmod(7), xsh_wavecal(7)
VERSION
xsh_scired_ifu_stare 3.5.3
AUTHOR
A.Modigliani, J.Vernet, P. Bristow <Andrea.Modigliani@eso.org>
BUG REPORTS
Please report any problems to Andrea.Modigliani@eso.org. Alternatively, you may send a
report to the ESO User Support Department <usd-help@eso.org>.
LICENSE
This file is part of the X-shooter Instrument Pipeline Copyright (C) 2006 European
Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA