Provided by: fence-agents-extra_4.7.1-1ubuntu8.1_amd64 
NAME
fence_apc - Fence agent for APC over telnet/ssh
DESCRIPTION
fence_apc is an I/O Fencing agent which can be used with the APC network power switch. It
logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh
connections should be avoided while a GFS cluster is running because the connection
will block any necessary fencing actions.
fence_apc accepts options on the command line as well as from stdin. Fenced sends
parameters through stdin when it execs the agent. fence_apc can be run by itself with
command line options. This is useful for testing and for turning outlets on or off from
scripts.
Vendor URL: http://www.apc.com
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['0', '0pc>'])
-k, --identity-file=[filename]
Identity file (private key) for SSH
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 23)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is
always required.
-x, --ssh
Use SSH connection
--ssh-options=[options]
SSH options to use (Default Value: -1 -c blowfish)
-s, --switch=[id]
Physical switch number on device
-l, --username=[name]
Login name This parameter is always required.
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--ssh-path=[path]
Path to ssh binary (Default Value: /usr/bin/ssh)
--telnet-path=[path]
Path to telnet binary (Default Value: /usr/bin/telnet)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more
then one device. Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can
be obtained without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
command_prompt
Force Python regex for command prompt (Default Value: ['0', '0pc>']) Obsoletes:
cmd_prompt
identity_file
Identity file (private key) for SSH
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ip IP address or hostname of fencing device This parameter is always required.
Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 23)
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug Physical plug number on device, UUID or identification of machine This parameter is
always required. Obsoletes: port
ssh Use SSH connection Obsoletes: secure
ssh_options
SSH options to use (Default Value: -1 -c blowfish)
switch Physical switch number on device
username
Login name This parameter is always required. Obsoletes: login
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
retry_on
Count of attempts to retry power on (Default Value: 1)
ssh_path
Path to ssh binary (Default Value: /usr/bin/ssh)
telnet_path
Path to telnet binary (Default Value: /usr/bin/telnet)