Provided by: fence-agents-extra_4.7.1-1ubuntu8.1_amd64 
NAME
fence_emerson - Fence agent for Emerson over SNMP
DESCRIPTION
fence_emerson is an I/O Fencing agent which can be used with MPX and MPH2 managed rack
PDU.
fence_emerson accepts options on the command line as well as from stdin. Fenced sends
parameters through stdin when it execs the agent. fence_emerson can be run by itself with
command line options. This is useful for testing and for turning outlets on or off from
scripts.
Vendor URL: http://www.emersonnetworkpower.com
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-c, --community=[community]
Set the community string
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 161)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is
always required.
-b, --snmp-auth-prot=[prot]
Set authentication protocol (MD5|SHA)
-P, --snmp-priv-passwd=[pass]
Set privacy protocol password
-R, --snmp-priv-passwd-script
Script to run to retrieve privacy password
-B, --snmp-priv-prot=[prot]
Set privacy protocol (DES|AES)
-E, --snmp-sec-level=[level]
Set security level (noAuthNoPriv|authNoPriv|authPriv)
-d, --snmp-version=[version]
Specifies SNMP version to use (1|2c|3)
-l, --username=[name]
Login name
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 5)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--snmpget-path=[path]
Path to snmpget binary (Default Value: /usr/bin/snmpget)
--snmpset-path=[path]
Path to snmpset binary (Default Value: /usr/bin/snmpset)
--snmpwalk-path=[path]
Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more
then one device. Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can
be obtained without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
community
Set the community string
ip IP address or hostname of fencing device This parameter is always required.
Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 161)
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug Physical plug number on device, UUID or identification of machine This parameter is
always required. Obsoletes: port
snmp_auth_prot
Set authentication protocol (MD5|SHA)
snmp_priv_passwd
Set privacy protocol password
snmp_priv_passwd_script
Script to run to retrieve privacy password
snmp_priv_prot
Set privacy protocol (DES|AES)
snmp_sec_level
Set security level (noAuthNoPriv|authNoPriv|authPriv)
snmp_version
Specifies SNMP version to use (1|2c|3)
username
Login name Obsoletes: login
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 5)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
retry_on
Count of attempts to retry power on (Default Value: 1)
snmpget_path
Path to snmpget binary (Default Value: /usr/bin/snmpget)
snmpset_path
Path to snmpset binary (Default Value: /usr/bin/snmpset)
snmpwalk_path
Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)