NAME

       fence_ilo_moonshot - Fence agent for HP Moonshot iLO

DESCRIPTION

       fence_ilo_moonshot accepts options on the command line as well as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_ilo_moonshot can be run by  itself
       with  command  line options.  This is useful for testing and for turning outlets on or off
       from scripts.

       Vendor URL: http://www.hp.com

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --command-prompt=[prompt]
              Force Python regex for command prompt (Default Value: ['MP>', 'hpiLO->'])

       -k, --identity-file=[filename]
              Identity file (private key) for SSH

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device This parameter is always required.

       -u, --ipport=[port]
              TCP/UDP  port  to  use  for  connection with device (Default Value: 22)

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       -x, --ssh
              Use SSH connection (Default Value: 1)

       --ssh-options=[options]
              SSH options to use

       -l, --username=[name]
              Login name This parameter is always required.

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       --verbose-level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --ssh-path=[path]
              Path to ssh binary (Default Value: /usr/bin/ssh)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if it  can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       command_prompt
              Force   Python  regex  for  command  prompt  (Default  Value:  ['MP>',  'hpiLO->'])
              Obsoletes: cmd_prompt

       identity_file
              Identity file (private key) for SSH

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ip     IP address or hostname  of  fencing  device  This  parameter  is  always  required.
              Obsoletes: ipaddr

       ipport TCP/UDP  port  to  use  for  connection with device (Default Value: 22)

       password
              Login password or passphrase Obsoletes: passwd

       password_script
              Script to run to retrieve password Obsoletes: passwd_script

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       ssh    Use SSH connection (Default Value: 1) Obsoletes: secure

       ssh_options
              SSH options to use

       username
              Login name This parameter is always required. Obsoletes: login

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       verbose_level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       ssh_path
              Path to ssh binary (Default Value: /usr/bin/ssh)