Provided by: netsniff-ng_0.6.8-2build1_amd64 
NAME
flowtop - top-like netfilter TCP/UDP/SCTP/DCCP/ICMP(v6) flow tracking
SYNOPSIS
flowtop { [options] }
DESCRIPTION
flowtop is a top-like connection tracking tool that can run on an end host or small home
router. It is able to present TCP, UDP/UDP-lite, SCTP, DCCP, and ICMP(v6) flows that have
been collected by the kernel's netfilter connection tracking framework, thus no packet
capturing in user space needs to be done.
flowtop is able to give you a quick overview of current connections on your local system,
e.g. for debugging purposes or to answer questions like:
* If you access website X, what other connections are being opened in
the background that I'm not aware of?
* What connections are active that pass one's router?
* I have this proprietary binary Y, to where does it connect?
* To which countries am I sending data?
* Are there any suspicious background connections on my machine?
* How many active connections does binary Y have?
* How long are connections active already?
* At which rate am I sending/receiving data?
The following information will be presented in flowtop's output:
* Application name and PID when run on local machine
* Reverse DNS for source and destination
* Geo-location information (country, city)
* Used protocols (IPv4, IPv6, TCP, UDP, SCTP, ICMP, ...)
* Flow port's service name heuristic
* Transport protocol state machine information
* Byte/packet counters (if they are enabled)
* Connection duration (if timestamping is enabled)
* Flow send/receive rate (if byte/packet counters are enabled)
In order for flowtop to work, netfilter must be active and running on your machine, thus
kernel-side connection tracking is active. If netfilter is not running, you can activate
it with iptables(8):
iptables -A INPUT -p tcp -m state --state ESTABLISHED -j ACCEPT
iptables -A OUTPUT -p tcp -m state --state NEW,ESTABLISHED -j ACCEPT
or by loading the following kernel modules:
modprobe nf_conntrack_ipv4
modprobe nf_conntrack_ipv6
To dump byte/packet counters flowtop enables the sysctl(8) parameter
net.netfilter.nf_conntrack_acct via:
echo 1 > /proc/sys/net/netfilter/nf_conntrack_acct
and resets it to the previously set value on exit. These counters will only be active on
connections which were created after accounting was enabled. Thus, to have these counters
be active all the time the parameter should be enabled after the system is up. To
automatically enable it, sysctl.conf(8) or sysctl.d(8) might be used.
To calculate the connection duration flowtop enables the sysctl(8) parameter
net.netfilter.nf_conntrack_timestamp via:
echo 1 > /proc/sys/net/netfilter/nf_conntrack_timestamp
and resets it to the previously set value on exit.
flowtop's intention is just to get a quick look over your active connections. If you want
logging support, have a look at netfilter's conntrack(8) tools instead.
OPTIONS
-4, --ipv4
Display IPv4 flows. That is the default when flowtop is started without any
arguments.
-6, --ipv6
Display IPv6 flows. That is the default when flowtop is started without any
arguments.
-T, --tcp
Display TCP flows. That is the default when flowtop is started without any
arguments.
-U, --udp
Display UDP and UDP-lite flows.
-D, --dccp
Display DCCP flows.
-I, --icmp
Display ICMP version 4 and version 6 flows.
-S, --sctp
Display SCTP flows.
-n, --no-dns
Don't perform hostname lookup. Only numeric addresses will be shown for flow
endpoints.
-G, --no-geoip
Don't perform GeoIP lookup. No geographical information will be shown for flow
endpoints.
-s, --show-src
Also show source information of the flow, not only destination information.
-b, --bits
Show flow rates in bits per second instead of bytes per second.
-u, --update
The built-in database update mechanism will be invoked to get Maxmind's latest
database. To configure search locations for databases, the file /etc/netsniff-
ng/geoip.conf contains possible addresses. Thus, to save bandwidth or for mirroring
Maxmind's databases (to bypass their traffic limit policy), different hosts or IP
addresses can be placed into geoip.conf, separated by a newline.
-t <time>, --interval <time>
Flow info refresh interval in seconds, default is 1s.
-v, --version
Show version information and exit.
-h, --help
Show user help and exit.
USAGE EXAMPLE
flowtop
Default ncurses output for flowtop that tracks IPv4, IPv6 flows for TCP.
flowtop -46UTDISs
This example enables the maximum display options for flowtop.
CONFIG FILES
Files under /etc/netsniff-ng/ can be modified to extend flowtop's service resolution and
lookup information.
* tcp.conf - TCP port/services map
* udp.conf - UDP port/services map
* geoip.conf - GeoIP database mirrors
BUGS
With a fairly high rate of connection tracking updates, flowtop can become unresponsive
for short periods of time while scrolling. The right fix would be to replace flowtop's
connection management backend with a better design with respect to the locking approach.
This is still on the "todo" list.
LEGAL
flowtop is licensed under the GNU GPL version 2.0.
HISTORY
flowtop was originally written for the netsniff-ng toolkit by Daniel Borkmann. It is
currently maintained by Tobias Klauser <tklauser@distanz.ch> and Daniel Borkmann
<dborkma@tik.ee.ethz.ch>.
SEE ALSO
netsniff-ng(8), trafgen(8), mausezahn(8), ifpps(8), bpfc(8), astraceroute(8), curvetun(8),
iptables(8), sysctl(8), sysctl.conf(8), sysctl.d(8)
AUTHOR
Manpage was written by Daniel Borkmann.
COLOPHON
This page is part of the Linux netsniff-ng toolkit project. A description of the project,
and information about reporting bugs, can be found at http://netsniff-ng.org/.