Provided by: frr_8.1-1ubuntu1.11_amd64 
NAME
frr-watchfrr - a program to monitor the status of FRRouting daemons
SYNOPSIS
watchfrr [-h] [-v]
watchfrr [option...] <daemon>...
DESCRIPTION
watchfrr is a watchdog program that monitors the status of supplied frr daemons and tries
to restart them in case they become unresponsive or shut down.
To determine whether a daemon is running, it tries to connect to the daemon's VTY UNIX
stream socket, and send echo commands to ensure the daemon responds. When the daemon
crashes, EOF is received from the socket, so that watchfrr can react immediately.
In order to avoid restarting the daemons in quick succession, you can supply the -m and -M
options to set the minimum and maximum delay between the restart commands. The minimum
restart delay is recalculated each time a restart is attempted. If the time since the
last restart attempt exceeds twice the value of -M, the restart delay is set to the value
of -m, otherwise the interval is doubled (but capped at the value of -M).
OPTIONS
--dry Run watchfrr in "dry-run" mode, only monitoring the specified daemons but not
performing any start/stop/restart actions.
-d, --daemon
Run in daemon mode. When supplied, error messages are sent to Syslog instead of
standard output (stdout).
-S <directory>, --statedir <directory>
Set the VTY socket directory (the default value is "/var/run/frr").
-N <name>, --pathspace <name>
Insert the given name into paths used by the FRR daemons. This is appended to the
VTY socket directory and passed to the daemons which also add it to their paths in
/etc.
--netns[=<name>]
(Linux only.) Switch network namespaces when starting watchfrr. The name defaults
to the value passed with -N (which it should be used in conjunction with.) If the
name is not specified, the option has no effect.
If the network namespace does not exist, it is created in a manner compatible with
iproute2. Network namespaces are not removed by FRR, this must be done with "ip
netns delete".
-l <level>, --loglevel <level>
Set the logging level (the default value is "6"). The value should range from 0
(LOG_EMERG) to 7 (LOG_DEBUG), but higher number can be supplied if extra debugging
messages are required.
--min-restart-interval <number>
Set the minimum number of seconds to wait between invocations of the daemon restart
commands (the default value is "60").
--max-restart-interval <number>
Set the maximum number of seconds to wait between invocations of the daemon restart
commands (the default value is "600").
-i <number>, --interval <number>
Set the status polling interval in seconds (the default value is "5").
-t <number>, --timeout <number>
Set the unresponsiveness timeout in seconds (the default value is "10").
-T <number>, --restart-timeout <number>
Set the restart (kill) timeout in seconds (the default value is "20"). If any
background jobs are still running after this period has elapsed, they will be
killed.
-p <filename>, --pid-file <filename>
Set the process identifier filename (the default value is
"/var/run/frr/watchfrr.pid").
-b <string>, --blank-string <string>
When the supplied string is found in any of the command line option arguments
(i.e., -r, -s, or -k), replace it with a space.
This is an ugly hack to circumvent problems with passing the command line arguments
containing embedded spaces.
-v, --version
Display the version information and exit.
-h, --help
Display the usage information and exit.
The following 3 options specify scripts that watchfrr uses to perform start/stop/restart
actions. Reasonable default values are built into watchfrr, so the use of these options
should no longer be necessary:
-s command, --start-command command
Supply a Bourne shell command to start a single daemon. The command string should
contain the '%s' placeholder to be substituted with the daemon name.
-k command, --kill-command command
Supply a Bourne shell command to stop a single daemon. The command string should
contain the '%s' placeholder to be substituted with the daemon name.
-r command, --restart command
Supply a Bourne shell command to restart a single daemon. The command string should
contain the '%s' placeholder to be substituted with the daemon name.
PREVIOUS OPTIONS
Prior versions of watchfrr supported some additional options that no longer exist::
-a, -A, -e, -R, -z
The -a, -A and -R options were used to select alternate monitoring modes that offered
different patterns of restarting daemons. The "correct" mode (phased restart) is now the
default. The -e and -z options used to disable some monitoring aspects, watchfrr now
always has all monitoring features enabled.
Removing these options should result in correct operation, if it does not please file a
bug report.
FILES
/usr/lib/frr/watchfrr
The default location of the watchfrr binary.
/etc/frr/watchfrr.conf
The default location of the watchfrr config file.
$(PWD)/watchfrr.log
If the watchfrr process is configured to output logs to a file, then you will find
this file in the directory where you started watchfrr.
WARNING
This man page is intended to be a quick reference for command line options. The definitive
document is the info file frr 8.1 or the documentation available on the project website at
https://frrouting.org/.
DIAGNOSTICS
The daemon may log to standard output, to a VTY, to a log file, or through syslog to the
system logs. FRR supports many debugging options, see the Info file, web docs or source
for details.
SEE ALSO
frr-zebra(8), vtysh(1), frr-ripd(8), frr-ripngd(8), frr-ospfd(8), frr-ospf6d(8),
frr-bgpd(8), frr-isisd(8), frr-babeld(8), frr-nhrpd(8), frr-pimd(8), frr-pbrd(8),
frr-ldpd(8), frr-eigrpd(8), frr-staticd(8), frr-fabricd(8), frr-vrrpd(8), mtracebis(8)
https://frrouting.org/
BUGS
FRR eats bugs for breakfast. If you have food for the maintainers, please email <‐
dev@lists.frrouting.org>.
COPYRIGHT
2024, FRR