Provided by: exfatprogs_1.1.3-1ubuntu0.1_amd64 
NAME
mkfs.exfat - create an exFAT filesystem
SYNOPSIS
mkfs.exfat [ -b boundary_alignment ] [ -c cluster_size ] [ -f ] [ -h ] [ -L volume_label ]
[ --pack-bitmap ] [ -v ] device
mkfs.exfat -V
DESCRIPTION
mkfs.exfat creates an exFAT filesystem by writing on a special file using the values found
in the arguments of the command line. It is invoked automatically by mkfs(8) when it is
given the -t exfat option.
As an example, to make a filesystem on the first partition on the first SCSI disk, use:
mkfs.exfat /dev/sda1
OPTIONS
-b, --boundary-align=alignment
Specifies the alignment for the FAT and the start of the cluster heap. The
alignment argument is specified in bytes or may be specified with m/M suffix for
mebibytes or k/K suffix for kibibytes and should be a power of two. Some media
like SD cards need this for optimal performance and endurance, in which case
alignment should be set to half of the card's native boundary unit size. If the
card's native boundary unit size is not known, refer to the following table of
boundary unit sizes recommended by the SD Card Association.
Card Capacity Range Cluster Size Boundary Unit
──────────────────────────────────────────────────────
≤8 MiB 8 KiB 8 KiB
>8 MiB ≤64 MiB 16 KiB 16 KiB
>64 MiB ≤256 MiB 16 KiB 32 KiB
>256 MiB ≤1 GiB 16 KiB 64 KiB
>1 GiB ≤2 GiB 32 KiB 64 KiB
>2 GiB ≤32 GiB 32 KiB 4 MiB
>32 GiB ≤128 GiB 128 KiB 16 MiB
>128 GiB ≤512 GiB 256 KiB 32 MiB
>512 GiB ≤2 TiB 512 KiB 64 MiB
-c, --cluster-size=size
Specifies the cluster size of the exFAT file system. The size argument is
specified in bytes or may be specified with m/M suffix for mebibytes or k/K suffix
for kibibytes and must be a power of two.
-f, --full-format
Performs a full format. This zeros the entire disk device while creating the exFAT
filesystem.
-h, --help
Prints the help and exit.
-L, --volume-label=label
Specifies the volume label to be associated with the exFAT filesystem.
--pack-bitmap
Attempts to relocate the exFAT allocation bitmap so that it ends at the alignment
boundary immediately following the FAT rather than beginning at that boundary.
This strictly violates the SD card specification but may improve performance and
endurance on SD cards and other flash media not designed for use with exFAT by
allowing file-system metadata updates to touch fewer flash allocation units.
Furthermore, many SD cards and other flash devices specially optimize the
allocation unit where the FAT resides so as to support tiny writes with reduced
write amplification but expect only larger writes in subsequent allocation units —
where the exFAT bitmap would be placed by default. Specifying --pack-bitmap
attempts to avoid the potential problems associated with issuing many small writes
to the bitmap by making it share an allocation unit with the FAT. If there is
insufficient space for the bitmap there, then this option will have no effect, and
the bitmap will be aligned at the boundary as by default.
-v, --verbose
Prints verbose debugging information while creating the exFAT filesystem.
-V, --version
Prints the version number and exits.
SEE ALSO
mkfs(8), mount(8),
mkfs.exfat(8)