Provided by: moosefs-client_3.0.116-1ubuntu2_amd64 
NAME
mfsmount - mount Moose File System
SYNOPSIS
mfsmount [HOST[:PORT]:[PATH]] [options] mountpoint
mfsmount -h|--help
mfsmount -V|--version
Since 3.0.75 (Linux only):
mount -t moosefs [options] [HOST[:PORT]:[PATH]] mountpoint
DESCRIPTION
Mount Moose File System.
General options:
-h, --help
display help and exit
-V display version information and exit
FUSE options:
-d, -o debug
enable debug mode (implies -f)
-f foreground operation
-s disable multi-threaded operation
MooseFS options:
-c CFGFILE, -o mfscfgfile=CFGFILE
loads file with additional mount options
-m, --meta, -o mfsmeta
mount MFSMETA companion filesystem instead of primary MooseFS
-n omit default mount options (-o allow_other)
-p prompt for password (interactive version of -o mfspassword=PASS)
-H HOST, -o mfsmaster=HOST
connect with MooseFS master on HOST (default is mfsmaster)
-P PORT, -o mfsport=PORT
connect with MooseFS master on PORT (default is 9421)
-B IP, -o mfsbind=IP
local address to use for connecting with master instead of default one
-L IP, -o mfsproxy=IP
define listen ip address of local master proxy for communication with tools
(default: 127.0.0.1)
-S PATH, -o mfssubfolder=PATH
mount specified MooseFS directory (default is /, i.e. whole filesystem)
-o mfspassword=PASSWORD
authenticate to MooseFS master with PASSWORD
-o mfspassfile=FILENAME
authenticate to MooseFS master with password stored in first line of file pointed
by FILENAME
-o mfsmd5pass=MD5
authenticate to MooseFS master using directly given MD5 (only if mfspassword option
is not specified)
-o mfsdonotrememberpassword
do not remember password in memory - more secure, but when session is lost then new
session is created without password
-o mfsdebug
print some MooseFS-specific debugging information
-o mfsmemlock
try to lock memory (all allocated memory will be mapped to physical RAM - which
also means no swapping)
-o allowoomkiller
do not disable out of memory killer (Linux only)
-o mfslimitarenas=N
if N>0 then limit glibc malloc arenas (Linux only - default: 4)
-o mfsflattrash
use flat trash structure in meta (option added for compatibility reasons - since
version 3.0.64 trash is split into 4096 subfolders which reduces problems with big
trashes)
-o mfsdelayedinit
connection with master is done in background - with this option mount can be run
without network (good for being run from fstab / init scripts etc.)
-o mfsmkdircopysgid=N
sgid bit should be copied during mkdir operation (default depends on operating
system)
-o mfssugidclearmode=SMODE
set sugid clear mode (see SUGID CLEAR MODES; default depends on operating system)
-o mfscachemode=CMODE
set cache mode (see DATA CACHE MODES; default is AUTO)
-o mfscachefiles
(deprecated) preserve file data in cache (equivalent to '-o mfscachemode=YES')
-o mfsattrcacheto=SEC
set attributes cache timeout in seconds (default: 1.0)
-o mfsxattrcacheto=SEC
set extended attributes (xattr) cache timeout in seconds (default: 30.0)
-o mfsentrycacheto=SEC
set file entry cache timeout in seconds (default: 0.0, i.e. no cache)
-o mfsdirentrycacheto=SEC
set directory entry cache timeout in seconds (default: 1.0)
-o mfsnegentrycacheto=SEC
set negative entry cache timeout in seconds (default: 0.0)
-o mfssymlinkcacheto=SEC
set symbolic link cache timeout in seconds (default: 300.0)
-o mfsgroupscacheto=SEC
set supplementary groups cache timeout in seconds (default: 300.0)
-o mfsrlimitnofile=N
try to change limit of simultaneously opened file descriptors on startup (default:
100000)
-o mfsnice=LEVEL
try to change nice level to specified value on startup (default: -19)
-o mfswritecachesize=N
specify write cache size in MiB (in range: 16..2048 - default: 256)
-o mfsreadaheadsize=N
define size of all read ahead buffers in MiB (in range: 16..2048 - default: 256)
-o mfsreadaheadleng=N
define amount of bytes to be additionally read (in range: 128KiB..2MiB - default:
1048576)
-o mfsreadaheadtrigger=N
define amount of bytes read sequentially that turns on read ahead (default: 10 *
mfsreadaheadleng)
-o mfserroronlostchunk
when all known chunkservers are connected to the master and the required chunk is
missing then immediately finish I/O and return an error
-o mfserroronnospace
when all known chunkservers are connected to the master and there is no free space
then immediately finish I/O and return an error
-o mfsioretries=N
specify number of retries before I/O error is returned (default: 30)
-o mfstimeout=N
define maximum timeout in seconds before I/O error is returned (default: 0 - which
means no timeout)
-o mfslogretry=N
define minimal retry counter on which system will start log I/O messages (default:
5)
-o mfsfsyncmintime=SEC
force fsync before last file close when file was opened/created at least SEC
seconds earlier (default: 0.0 - always do fsync before close)
-o mfspreflabels=LABELEXPR
specify preferred labels for choosing chunkservers during I/O
-o mfsnoxattrs
turn off xattr support
-o mfsnoposixlocks
turn off support for global posix locks (lockf + ioctl) - locks will work locally
-o mfsnobsdlocks
turn off support for global BSD locks (flock) - locks will work locally
General mount options (see mount(8) manual):
-o rw|-o ro
Mount file-system in read-write (default) or read-only mode respectively.
-o suid|-o nosuid
Enable or disable suid/sgid attributes to work.
-o dev|-o nodev
Enable or disable character or block special device files interpretation.
-o exec|-o noexec
Allow or disallow execution of binaries.
SUGID CLEAR MODE
During attribute change file systems sometimes clear flags suid and/or sgid. Behavior is
different on different file systems. MFS tries to mimic behavior of most popular file
system on given operating systems.
NEVER MFS will not change suid and sgid bit on chown
ALWAYS clear suid and sgid on every chown - safest operation
OSX standard behavior in OS X and Solaris (chown made by unprivileged user clear suid
and sgid)
BSD standard behavior in *BSD systems (like in OSX, but only when something is really
changed)
EXT standard behavior in most file systems on Linux (directories not changed, others:
suid cleared always, sgid only when group exec bit is set)
XFS standard behavior in XFS on Linux (like EXT but directories are changed by
unprivileged users)
DATA CACHE MODES
There are four cache modes: DIRECT, NO, YES and AUTO. Default option is AUTO and you
shuldn't change it unless you really know what you are doing. In AUTO mode data cache is
managed automatically by mfsmaster.
DIRECT forces direct io (bypasses cache)
NO,NONE or NEVER
never allow files data to be kept in cache (safest but can reduce efficiency)
YES or ALWAYS
always allow files data to be kept in cache (dangerous)
AUTO file cache is managed by mfsmaster automatically (should be very safe and
efficient)
LABEL EXPRESSIONS
LABELEXPR grammar:
LABELEXPR -> S ; LABELEXPR | S
S -> S + M | M
M -> M L | L
L -> a .. z | A .. Z | ( S ) | [ S ]
Subexpressions should be placed in priority order. Up to nine subexpressions (priorities)
can be specified.
FSTAB
On most Unix systems mfsmount can be invoked automatically from /etc/fstab. Be aware that
rw or ro option has to be specified in options. Also on many systems there should be
option which informs the system that this mountpoint should be mounted after starting
networking services (options such as _netdev or late).
Linux:
mfsmount mountpoint fuse options 0 0
*BSD:
mfsmount_magic mountpoint moosefs options,mountprog=/usr/local/bin/mfsmount 0 0
Since version 3.0.75 alternative form can be used:
Linux:
HOST[:PORT]:[PATH] mountpoint moosefs options 0 0
*BSD:
HOST[:PORT]:[PATH] mountpoint moosefs options,mountprog=/usr/local/bin/mfsmount 0 0
REPORTING BUGS
Report bugs to <bugs@moosefs.com>.
COPYRIGHT
Copyright (C) 2021 Jakub Kruszona-Zawadzki, Core Technology Sp. z o.o.
This file is part of MooseFS.
MooseFS is free software; you can redistribute it and/or modify it under the terms of the
GNU General Public License as published by the Free Software Foundation, version 2 (only).
MooseFS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with MooseFS; if
not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
02111-1301, USA or visit http://www.gnu.org/licenses/gpl-2.0.html
SEE ALSO
mfsmaster(8), mfstools(1), mount(8)