Provided by: rpm_4.17.0+dfsg1-4build1_amd64 
NAME
rpmbuild - Build RPM Package(s)
SYNOPSIS
BUILDING PACKAGES:
rpmbuild {-ba|-bb|-bp|-bc|-bi|-bl|-bs|-br} [rpmbuild-options] SPECFILE ...
rpmbuild {-ra|-rb|-rp|-rc|-ri|-rl|-rs|-rr} [rpmbuild-options] SOURCEPACKAGE ...
rpmbuild {-ta|-tb|-tp|-tc|-ti|-tl|-ts|-tr} [rpmbuild-options] TARBALL ...
rpmbuild {--rebuild|--recompile} SOURCEPKG ...
MISCELLANEOUS:
rpmbuild --showrc
rpmbuild-options
[--buildroot DIRECTORY] [--clean] [--nobuild] [--rmsource] [--rmspec] [--short-circuit] [--build-in-
place] [--noprep] [--noclean] [--nocheck] [--rpmfcdebug] [--target PLATFORM] [--with OPTION] [--without
OPTION]
DESCRIPTION
rpmbuild is used to build both binary and source software packages. A package consists of an archive of
files and meta-data used to install and erase the archive files. The meta-data includes helper scripts,
file attributes, and descriptive information about the package. Packages come in two varieties: binary
packages, used to encapsulate software to be installed, and source packages, containing the source code
and recipe necessary to produce binary packages.
One of the following basic modes must be selected: Build Package, Build Package from Tarball, Recompile
Package, Show Configuration.
GENERAL OPTIONS
These options can be used in all the different modes.
-?, --help
Print a longer usage message then normal.
--version
Print a single line containing the version number of rpm being used.
--quiet
Print as little as possible - normally only error messages will be displayed.
-v Print verbose information - normally routine progress messages will be displayed.
-vv Print lots of ugly debugging information.
--rpmfcdebug
Enables to debug dependencies generation.
--rcfile FILELIST
Each of the files in the colon separated FILELIST is read sequentially by rpm for configuration
information. Only the first file in the list must exist, and tildes will be expanded to the value
of $HOME. The default FILELIST is
/usr/lib/rpm/rpmrc:/usr/lib/rpm/<vendor>/rpmrc:/etc/rpmrc:~/.rpmrc.
--pipe CMD
Pipes the output of rpm to the command CMD.
--dbpath DIRECTORY
Use the database in DIRECTORY rather than the default path /var/lib/rpm
--root DIRECTORY
Use the file system tree rooted at DIRECTORY for all operations. Note that this means the
database within DIRECTORY will be used for dependency checks and any scriptlet(s) (e.g. %post if
installing, or %prep if building, a package) will be run after a chroot(2) to DIRECTORY.
-D, --define='MACRO EXPR'
Defines MACRO with value EXPR.
--scm=SCM
Select the SCM to use with %autosetup, if one is not set in the spec file. Note that not all
values for SCM, e.g., patch (the default) and gendiff, git, or quilt work interchangeably with all
other patches and options stated in the %autosetup line, especially option -pN.
BUILD OPTIONS
The general form of an rpm build command is
rpmbuild {-bSTAGE|-rSTAGE|-tSTAGE} [rpmbuild-options] FILE ...
The argument used is -b if a spec file is being used to build the package, -r if a source package is to
be rebuilt and -t if rpmbuild should look inside of a (possibly compressed) tar file for the spec file to
use.
Packages are built in a number of stages. The first six correspond to the following sections in a spec
file: %prep, %generate_buildrequires, %build, %install, %check and %clean. Finally, binary and source
packages are created in an assembly stage.
The STAGE character specifies the stage to finish with (after doing all the stages preceding it), and is
one of:
-ba Perform a full build - executes up to and including the assembly stage. In most cases, this is
the option to choose.
-bb Build just the binary packages - executes up to and including the assembly stage, but without
creating the source package.
-bp Unpack the sources and apply any patches - executes the %prep stage only.
-bc Compile the sources - executes up to and including the %build stage. This generally involves the
equivalent of a "make".
-bi Install the binaries into the build root - executes up to and including the %check stage. This
generally involves the equivalent of a "make install" and "make check".
-bl Do a "list check" - the %files section from the spec file is macro expanded, and checks are made
to verify that each file exists.
-bs Build just the source package - skips straight to the assembly stage, without executing any of the
preceding stages or creating binary packages.
-br Build just the source package, but also parse and include dynamic build dependencies - executes up
to and including the %generate_buildrequires stage and then skips straight to the assembly stage,
without creating binary packages. This command can be used to fully resolve dynamic build
dependencies. See the DYNAMIC BUILD DEPENDENCIES section for details.
The following options may also be used:
--buildroot DIRECTORY
When building a package, override the BuildRoot tag with directory DIRECTORY.
--clean
Remove the build tree after the packages are made.
--nobuild
Do not execute any build stages. Useful for testing out spec files.
--noprep
Do not execute %prep build stage even if present in spec.
--noclean
Do not execute %clean build stage even if present in spec.
--nocheck
Do not execute %check build stage even if present in spec.
--nodebuginfo
Do not generate debuginfo packages.
--nodeps
Do not verify build dependencies.
--rmsource
Remove the sources after the build (may also be used standalone, e.g. "rpmbuild --rmsource
foo.spec").
--rmspec
Remove the spec file after the build (may also be used standalone, eg. "rpmbuild --rmspec
foo.spec").
--short-circuit
Skip straight to specified stage (i.e., skip all stages leading up to the specified stage). Only
valid with -bc, -bi, and -bb. Useful for local testing only. Packages built this way will be
marked with an unsatisfiable dependency to prevent their accidental use.
--build-in-place
Build from locally checked out sources. Sets _builddir to current working directory. Skips
handling of -n and untar in the %setup and the deletion of the buildSubdir.
--target PLATFORM
When building the package, interpret PLATFORM as arch-vendor-os and set the macros %_target,
%_target_cpu, and %_target_os accordingly.
--with OPTION
Enable configure OPTION for build.
--without OPTION
Disable configure OPTION for build.
REBUILD AND RECOMPILE OPTIONS
There are two other ways to invoke building with rpm:
rpmbuild --rebuild|--recompile SOURCEPKG ...
When invoked this way, rpmbuild installs the named source package, and does a prep, compile and install.
In addition, --rebuild builds a new binary package. When the build has completed, the build directory is
removed (as in --clean) and the the sources and spec file for the package are removed.
These options are now superseded by the -r* options which allow much more fine control over what stages
of the build to run.
DYNAMIC BUILD DEPENDENCIES
When the %generate_buildrequires stage runs and some of the newly generated BuildRequires are not
satisfied, rpmbuild creates an intermediate source package ending in buildreqs.nosrc.rpm, which has the
new BuildRequires, and exits with code 11. This package can then be used in place of the original source
package to resolve and install the missing build dependencies in the usual way, such as with dnf-
builddep(8).
Multiple layers of dynamic build dependencies may exist in a spec file; the presence of specific
BuildRequires on the system may yield new BuildRequires next time a build is performed with the same
source package. The easiest way to ensure that all dynamic build dependencies are satisfied is to run
the -br command, install the new dependencies of the buildreqs.nosrc.rpm package and repeat the whole
procedure until rpmbuild no longer exits with code 11.
If the -br command is coupled with --nodeps, exit code 11 is always returned and a buildreqs.nosrc.rpm
package is always created.
SHOWRC
The command
rpmbuild --showrc
shows the values rpmbuild will use for all of the options are currently set in rpmrc and macros
configuration file(s).
FILES
rpmrc Configuration
/usr/lib/rpm/rpmrc
/usr/lib/rpm/<vendor>/rpmrc
/etc/rpmrc
~/.rpmrc
Macro Configuration
/usr/lib/rpm/macros
/usr/lib/rpm/<vendor>/macros
/etc/rpm/macros
~/.rpmmacros
Temporary
/var/tmp/rpm*
SEE ALSO
gendiff(1),
popt(3),
rpm(8),
rpm2cpio(8),
rpmkeys(8)
rpmspec(8),
rpmsign(8),
rpmbuild --help - as rpm supports customizing the options via popt aliases it's impossible to guarantee
that what's described in the manual matches what's available.
http://www.rpm.org/ <URL:http://www.rpm.org/>
AUTHORS
Marc Ewing <marc@redhat.com>
Jeff Johnson <jbj@redhat.com>
Erik Troan <ewt@redhat.com>
09 June 2002 RPMBUILD(8)