NAME

       sminfo - query InfiniBand SMInfo attribute

SYNOPSIS

       sminfo [options] sm_lid | sm_dr_path [modifier]

DESCRIPTION

       Optionally  set  and  display  the  output of a sminfo query in human readable format. The
       target SM is the one listed in the local port info, or the SM specified by the optional SM
       lid or by the SM direct routed path.

       Note: using sminfo for any purposes other then simple query may be very dangerous, and may
       result in a malfunction of the target SM.

OPTIONS

       -s, --state <state> set SM state
              0 not active

              1 discovering

              2 standby

              3 master

       -p, --priority <priority> set priority (0-15)

       -a, --activity <val> set activity count

   Addressing Flags
       -D, --Direct     The address specified is a directed route

          Examples:
             [options] -D [options] "0"          # self port
             [options] -D [options] "0,1,2,1,4"  # out via port 1, then 2, ...

             (Note the second number in the path specified must match the port being
             used.  This can be specified using the port selection flag '-P' or the
             port found through the automatic selection process.)

       -G, --Guid     The address specified is a Port GUID

       -L, --Lid   The address specified is a LID

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple port/Multiple CA support: when no IB device or port is specified (see the  "local
       umad  parameters"  below),  the libibumad library selects the port to use by the following
       criteria:

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If a port and/or CA name is specified, the libibumad library attempts  to  fulfill  the
          user request, and will fail if it is not possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

   Debugging flags
       -d     raise the IB debugging level.  May be used several times (-ddd or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose
              increase  the application verbosity level.  May be used several times (-vv or -v -v
              -v)

       -V, --version     show the version info.

   Configuration flags
       -t, --timeout <timeout_ms> override the default timeout for the solicited mads.

       -y, --m_key <key>
              use the specified M_key for requests. If non-numeric value (like 'x') is  specified
              then a value will be prompted for.

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband-diags/ibdiag.conf

FILES

   CONFIG FILE
       /etc/infiniband-diags/ibdiag.conf

       A  global  config  file  is provided to set some of the common options for all tools.  See
       supplied config file for details.

EXAMPLES

       ::     sminfo                  # local port's sminfo sminfo 32               # show sminfo
              of lid 32 sminfo  -G 0x8f1040023  # same but using guid address

SEE ALSO

       smpdump (8)

AUTHOR

       Hal Rosenstock
              < halr@voltaire.com >

                                            2017-08-21                                  SMINFO(8)