Provided by: calibre_6.3.0+dfsg-2_all 
NAME
ebook-convert - ebook-convert
ebook-convert input_file output_file [options]
Convert an e-book from one format to another.
input_file is the input and output_file is the output. Both must be specified as the first
two arguments to the command.
The output e-book format is guessed from the file extension of output_file. output_file
can also be of the special format .EXT where EXT is the output file extension. In this
case, the name of the output file is derived from the name of the input file. Note that
the filenames must not start with a hyphen. Finally, if output_file has no extension, then
it is treated as a folder and an "open e-book" (OEB) consisting of HTML files is written
to that folder. These files are the files that would normally have been passed to the
output plugin.
After specifying the input and output file you can customize the conversion by specifying
various options. The available options depend on the input and output file types. To get
help on them specify the input and output file and then use the -h option.
For full documentation of the conversion system see E-book conversion
Whenever you pass arguments to ebook-convert that have spaces in them, enclose the
arguments in quotation marks. For example: "/some path/with spaces"
The options and default values for the options change depending on both the input and
output formats, so you should always check with:
ebook-convert myfile.input_format myfile.output_format -h
Below are the options that are common to all conversion, followed by the options specific
to every input and output format.
• INPUT VALGMULIGHEDER
• OUTPUT VALGMULIGHEDER
• Udseende og opførelse
• HEURISTISK BEHANDLING
• SØG OG ERSTAT
• STRUKTURDETEKTERING
• INDHOLDSFORTEGNELSE
• METADATA
• FEJLSØG
--help, -h
Vis denne hjælpetekst og afslut
--input-profile
Vælg input-profil. Input-profilen vejleder systemet i hvorledes forskellig
information i input-dokumentet skal tolkes. F.eks. opløsningsafhængige længder
(f.eks. pixel-længde). Valgmuligheder er: cybookg3, cybook_opus, default, hanlinv3,
hanlinv5, illiad, irexdr1000, irexdr800, kindle, msreader, mobipocket, nook, sony,
sony300, sony900
--list-recipes
List builtin recipe names. You can create an e-book from a builtin recipe like
this: ebook-convert "Recipe Name.recipe" output.epub
--output-profile
Specify the output profile. The output profile tells the conversion system how to
optimize the created document for the specified device (such as by resizing images
for the device screen size). In some cases, an output profile can be used to
optimize the output for a particular device, but this is rarely necessary. Choices
are:cybookg3, cybook_opus, default, generic_eink, generic_eink_large,
generic_eink_hd, hanlinv3, hanlinv5, illiad, ipad, ipad3, irexdr1000, irexdr800,
jetbook5, kindle, kindle_dx, kindle_fire, kindle_oasis, kindle_pw, kindle_pw3,
kindle_voyage, kobo, msreader, mobipocket, nook, nook_color, nook_hd_plus,
pocketbook_inkpad3, pocketbook_lux, pocketbook_hd, pocketbook_900,
pocketbook_pro_912, galaxy, sony, sony300, sony900, sony-landscape, sonyt3, tablet
--version
vis programmets version og afslut
INPUT VALGMULIGHEDER
Valgmuligheder til styring af behandlingen af input mobi filen
--input-encoding
Angiv tegnsættet for kildedokumentet. Hvis denne indstilling vælges, vil
dokumentets tegnsætsvalg overskrives. Især nyttig til dokumenter, hvor tegnsæt ikke
er valgt eller har fejlagtige tegnsætsvalg.
OUTPUT VALGMULIGHEDER
Valgmuligheder til styring af behandlingen af output epub
--dont-split-on-page-breaks
Turn off splitting at page breaks. Normally, input files are automatically split at
every page break into two files. This gives an output e-book that can be parsed
faster and with less resources. However, splitting is slow and if your source file
contains a very large number of page breaks, you should turn off splitting on page
breaks.
--epub-flatten
This option is needed only if you intend to use the EPUB with FBReaderJ. It will
flatten the file system inside the EPUB, putting all files into the top level.
--epub-inline-toc
Indsæt en indholdsfortegnelse som vil blive vist som en del af bogens indhold.
--epub-toc-at-end
Indsæt indholdsfortegnelsen i enden af bogen istedet for ved begyndelsen.
--epub-version
The version of the EPUB file to generate. EPUB 2 is the most widely compatible,
only use EPUB 3 if you know you actually need it.
--extract-to
Extract the contents of the generated EPUB file to the specified folder. The
contents of the folder are first deleted, so be careful.
--flow-size
Split all HTML files larger than this size (in KB). This is necessary as most EPUB
readers cannot handle large file sizes. The default of 260KB is the size required
for Adobe Digital Editions. Set to 0 to disable size based splitting.
--no-default-epub-cover
Normalt, hvis input-filen ikke har et omslag og du ikke angiver et, vil et standard
omslag genereres med titel, forfattere, osv. Denne valgmulighed deaktiverer
genereringen af dette omslag.
--no-svg-cover
Anvend ikke SVG (Scalable Vector Graphics) til et e-bogomslag. Anvend denne
valgmulighed hvis din EPUB skal anvendes til en enhed som ikke understøtter SVG,
som f.eks. iPhone eller JetBook Lite. Uden dette fravalg vil disse enheder blot
vise omslaget som en blank side.
--preserve-cover-aspect-ratio
Når et SVG omslag anvendes, vil denne valgmulighed gøre at omslaget skaleres til
skærmstørrelsen, men stadig bevare aspektforholdet (forholdet mellem bredde og
højde). Dette betyder at der kan forekomme hvide flader ved siderne eller top og
bund af illustationen, men det forvrænges. Uden denne valgmulighed vil billedet i
en del tilfælde blive forvrænget, men skærmen vil fyldes ud.
--pretty-print
Hvis angivet, vil uddata-udvidelsesmodulet prøve at oprette uddata, der er så
læsbart som muligt. Vil muligvis ikke have virkning for visse
uddata-udvidelsesmoduler.
--toc-title
Titel for enhver genereret in-line indholdsfortegnelse.
UDSEENDE OG OPFØRELSE
Valgmuligheder til styring af udseendet af output
--asciiize
Transliterate Unicode characters to an ASCII representation. Use with care because
this will replace Unicode characters with ASCII. For instance it will replace
"Pelé" with "Pele". Also, note that in cases where there are multiple
representations of a character (characters shared by Chinese and Japanese for
instance) the representation based on the current calibre interface language will
be used.
--base-font-size
The base font size in pts. All font sizes in the produced book will be rescaled
based on this size. By choosing a larger size you can make the fonts in the output
bigger and vice versa. By default, when the value is zero, the base font size is
chosen based on the output profile you chose.
--change-justification
Vælg afsnitsjustering. "left" giver venstremargin. "justify" giver lige margin.
"original" (standard) - ingen ændring. Bemærk at kun nogle output-formater
understøtter lige margin.
--disable-font-rescaling
Deaktivér alle reskaleringer af skriftsstørrelser
--embed-all-fonts
Embed every font that is referenced in the input document but not already embedded.
This will search your system for the fonts, and if found, they will be embedded.
Embedding will only work if the format you are converting to supports embedded
fonts, such as EPUB, AZW3, DOCX or PDF. Please ensure that you have the proper
license for embedding the fonts used in this document.
--embed-font-family
Embed the specified font family into the book. This specifies the "base" font used
for the book. If the input document specifies its own fonts, they may override this
base font. You can use the filter style information option to remove fonts from the
input document. Note that font embedding only works with some output formats,
principally EPUB, AZW3 and DOCX.
--expand-css
By default, calibre will use the shorthand form for various CSS properties such as
margin, padding, border, etc. This option will cause it to use the full expanded
form instead. Note that CSS is always expanded when generating EPUB files with the
output profile set to one of the Nook profiles as the Nook cannot handle shorthand
CSS.
--extra-css
Enten stien til en CSS stylesheet eller rå CSS. Dette CSS vil blive tilføjet til
stilreglerne fra kildefilen, så de tilsidesætte de oprindelige stilregler.
--filter-css
A comma separated list of CSS properties that will be removed from all CSS style
rules. This is useful if the presence of some style information prevents it from
being overridden on your device. For example:
font-family,color,margin-left,margin-right
--font-size-mapping
Afbildning fra CSS skriftsnavne til skriftsstørrelser i pkt (typografiske punkter).
Et eksempel valg er 12,12,14,16,18,20,22,24. Disse afbildninger er
skriftsstørrelserne for xx-small til xx-large, med den sidste størrelser for store
skriftsstørrelser. Skrifternes reskaleringsalgoritme anvender disse størrelser som
målestok. Standardværdien fås fra en output-profil du tidligere har valgt.
--insert-blank-line
Håndhæv blank linje (=to linjeskift) mellem afsnit. Valget har ikke effekt på
kildefiler, som ikke indeholder <p> eller <div> tags.
--insert-blank-line-size
Set the height of the inserted blank lines (in em). The height of the lines between
paragraphs will be twice the value set here.
--keep-ligatures
Bevar ligaturer i input-dokumentet. En ligatur er en speciel skrivning af et par
bogstaver såsom ff, fi, fl et cetera. De fleste e-boglæsere understøtter ikke
ligaturer i deres skriftstyper og de vil derfor ikke vises korrekt. Som standard
vil Calibre omdanne en ligatur til korresponderende par af normale bogstaver. Dette
valg bibeholde ligaturer.
--line-height
The line height in pts. Controls spacing between consecutive lines of text. Only
applies to elements that do not define their own line height. In most cases, the
minimum line height option is more useful. By default no line height manipulation
is performed.
--linearize-tables
Nogle dårligt designede dokumenter anvender tabeller til layout-styring af sidens
tekstelementer. Når disse dokumenter konverteres, har de ofte tekstelementer som
løber ud af skærmen eller andre mærkværdigheder. Dette valg vil fjerne tabellen og
sammensætte tekstelementerne i læserækkefølge.
--margin-bottom
Set the bottom margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-left
Set the left margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-right
Set the right margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-top
Set the top margin in pts. Default is 5.0. Setting this to less than zero will
cause no margin to be set (the margin setting in the original document will be
preserved). Note: Page oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--minimum-line-height
The minimum line height, as a percentage of the element's calculated font size.
calibre will ensure that every element has a line height of at least this setting,
irrespective of what the input document specifies. Set to zero to disable. Default
is 120%. Use this setting in preference to the direct line height specification,
unless you know what you are doing. For example, you can achieve "double spaced"
text by setting this to 240.
--remove-paragraph-spacing
Fjern afstand mellem afsnit. Der vælges også et indryk på 1,5em. Spacing removal
will not work if the source file does not use paragraphs Valget har ikke effekt på
kildefiler, som ikke indeholder <p> eller <div> tags.
--remove-paragraph-spacing-indent-size
When calibre removes blank lines between paragraphs, it automatically sets a
paragraph indent, to ensure that paragraphs can be easily distinguished. This
option controls the width of that indent (in em). If you set this value negative,
then the indent specified in the input document is used, that is, calibre does not
change the indentation.
--smarten-punctuation
Convert plain quotes, dashes and ellipsis to their typographically correct
equivalents. For details, see https://daringfireball.net/projects/smartypants.
--subset-embedded-fonts
Subset all embedded fonts. Every embedded font is reduced to contain only the
glyphs used in this document. This decreases the size of the font files. Useful if
you are embedding a particularly large font with lots of unused glyphs.
--transform-css-rules
Path to a file containing rules to transform the CSS styles in this book. The
easiest way to create such a file is to use the wizard for creating rules in the
calibre GUI. Access it in the "Look & feel->Transform styles" section of the
conversion dialog. Once you create the rules, you can use the "Export" button to
save them to a file.
--transform-html-rules
Path to a file containing rules to transform the HTML in this book. The easiest way
to create such a file is to use the wizard for creating rules in the calibre GUI.
Access it in the "Look & feel->Transform HTML" section of the conversion dialog.
Once you create the rules, you can use the "Export" button to save them to a file.
--unsmarten-punctuation
Konverter dekorative citater, bindestreger og ellipse til deres almindelige
ækvivalenter.
HEURISTISK BEHANDLING
Modify the document text and structure using common patterns. Disabled by default. Use
--enable-heuristics to enable. Individual actions can be disabled with the --disable-*
options.
--disable-dehyphenate
Analyze hyphenated words throughout the document. The document itself is used as a
dictionary to determine whether hyphens should be retained or removed.
--disable-delete-blank-paragraphs
Fjern tomme afsnit fra dokumentet, når de eksisterer mellem hvertandet afsnit
--disable-fix-indents
Turn indentation created from multiple non-breaking space entities into CSS
indents.
--disable-format-scene-breaks
Left aligned scene break markers are center aligned. Replace soft scene breaks that
use multiple blank lines with horizontal rules.
--disable-italicize-common-cases
Søg efter almindelige ord og mønstre der angiver kursiveret tekst og kursiver dem.
--disable-markup-chapter-headings
Detect unformatted chapter headings and sub headings. Change them to h2 and h3
tags. This setting will not create a TOC, but can be used in conjunction with
structure detection to create one.
--disable-renumber-headings
Looks for occurrences of sequential <h1> or <h2> tags. The tags are renumbered to
prevent splitting in the middle of chapter headings.
--disable-unwrap-lines
Unwrap lines using punctuation and other formatting clues.
--enable-heuristics
Slå heuristisk behandling til. Dette skal være slået til for heuristisk behandling
kan finde sted overhovedet.
--html-unwrap-factor
Scale used to determine the length at which a line should be unwrapped. Valid
values are a decimal between 0 and 1. The default is 0.4, just below the median
line length. If only a few lines in the document require unwrapping this value
should be reduced
--replace-scene-breaks
Replace scene breaks with the specified text. By default, the text from the input
document is used.
SØG OG ERSTAT
Ændre dokumentets tekst og struktur vha. brugerdefinerede mønstre.
--search-replace
Path to a file containing search and replace regular expressions. The file must
contain alternating lines of regular expression followed by replacement pattern
(which can be an empty line). The regular expression must be in the Python regex
syntax and the file must be UTF-8 encoded.
--sr1-replace
Erstatning som skal erstatte teksten fundet med sr1-search.
--sr1-search
Søgemønster (regulært udtryk) som skal erstattes med sr1-replace.
--sr2-replace
Erstatning som skal erstatte teksten fundet med sr2-search.
--sr2-search
Søgemønster (regulært udtryk) som skal erstattes med sr2-replace.
--sr3-replace
Erstatning som skal erstatte teksten fundet med sr3-search.
--sr3-search
Søgemønster (regulært udtryk) som skal erstattes med sr3-replace.
STRUKTURDETEKTERING
Styring af auto-detektion af dokumentets struktur.
--chapter
An XPath expression to detect chapter titles. The default is to consider <h1> or
<h2> tags that contain the words "chapter", "book", "section", "prologue",
"epilogue" or "part" as chapter titles as well as any tags that have
class="chapter". The expression used must evaluate to a list of elements. To
disable chapter detection, use the expression "/". See the XPath Tutorial in the
calibre User Manual for further help on using this feature.
--chapter-mark
Angiv hvordan detekterede kapitler skal fremhæves. Værdien "pagebreak" vil indsætte
sideskift før kapitler. Værdien "rule" vil indsætte et linjeskift før kapitler.
Værdien "none" vil deaktivere fremhævningen - og værdien "both" vil bruge både
sideskift og linjeskift som kapitelfremhævning.
--disable-remove-fake-margins
Some documents specify page margins by specifying a left and right margin on each
individual paragraph. calibre will try to detect and remove these margins.
Sometimes, this can cause the removal of margins that should not have been removed.
In this case you can disable the removal.
--insert-metadata
Insert the book metadata at the start of the book. This is useful if your e-book
reader does not support displaying/searching metadata directly.
--page-breaks-before
An XPath expression. Page breaks are inserted before the specified elements. To
disable use the expression: /
--prefer-metadata-cover
Brug omslaget fra kildefilen fremfor det angivne omslag.
--remove-first-image
Remove the first image from the input e-book. Useful if the input document has a
cover image that is not identified as a cover. In this case, if you set a cover in
calibre, the output document will end up with two cover images if you do not
specify this option.
--start-reading-at
An XPath expression to detect the location in the document at which to start
reading. Some e-book reading programs (most prominently the Kindle) use this
location as the position at which to open the book. See the XPath tutorial in the
calibre User Manual for further help using this feature.
INDHOLDSFORTEGNELSE
Styring af den automatiske generering af indholdsfortegnelsen. Som udgangspunkt vil en
evt. indholdsfortegnelse i kildefilen blive foretrukket, fremfor en selvgenereret.
--duplicate-links-in-toc
When creating a TOC from links in the input document, allow duplicate entries, i.e.
allow more than one entry with the same text, provided that they point to a
different location.
--level1-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level one. If this is specified, it takes precedence over other forms
of auto-detection. See the XPath Tutorial in the calibre User Manual for examples.
--level2-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level two. Each entry is added under the previous level one entry. See
the XPath Tutorial in the calibre User Manual for examples.
--level3-toc
XPath expression that specifies all tags that should be added to the Table of
Contents at level three. Each entry is added under the previous level two entry.
See the XPath Tutorial in the calibre User Manual for examples.
--max-toc-links
Maksimalt antal isatte henvisninger i indholdsfortegnelsen. Vælg 0 for
deaktivering. Standardværdi er: 50. Henvisninger tilføjes kun til
indholdsfortegnelsen hvis mindre end kapitelantal tærsklen.
--no-chapters-in-toc
Tilføj ikke auto-detekterede kapitler til indholdsfortegnelsen.
--toc-filter
Fjern indgange i indholdfortegnelse med titler, der matcher det valgte regulære
udtryk. Matchende indgange og alle deres underindgange fjernes.
--toc-threshold
Hvis færre end dette antal kapitler er genkendt, bliver henvisninger tilføjet til
indholdsfortegnelsen. Standardværdi: 6
--use-auto-toc
Hvis kildefilen allerede har en indholdsfortegnelse, vil den normalt blive anvendt
i stedet for den auto-genererede. Med denne indstilling vil den auto-genererede
altid blive brugt.
METADATA
Muligheder for at angive metadata i output
--author-sort
Forfatterversion anvendt ved sortering.
--authors
Angiv forfatterne. Flere forfattere skal separeres ampersand.
--book-producer
Angiv bogens bogens producer.
--comments
Set the e-book description.
--cover
Vælg omslaget via den angivne fil eller URL
--isbn Angiv bogens ISBN.
--language
Vælg sprog.
--pubdate
Set the publication date (assumed to be in the local timezone, unless the timezone
is explicitly specified)
--publisher
Set the e-book publisher.
--rating
Angiv vurdering. Skal være et heltal i intervallet 1 til 5.
--read-metadata-from-opf, --from-opf, -m
Indlæs metadata fra den angivne OPF-fil. Metadata læsning fra denne fil vil
tilsidesætte metadata i kildefilen.
--series
Set the series this e-book belongs to.
--series-index
Angiv bogens indeks i denne serie.
--tags Angiv bogens mærkater. Skal være en kommasepareret liste.
--timestamp
Sæt bogens tidsmærke (bliver ikke længere brugt noget sted)
--title
Angiv titlen.
--title-sort
Titelversion anvendt ved sortering.
FEJLSØG
Muligheder der kan hjælpe med konverteringsfejlfinding
--debug-pipeline, -d
Save the output from different stages of the conversion pipeline to the specified
folder. Useful if you are unsure at which stage of the conversion process a bug is
occurring.
--verbose, -v
Level of verbosity. Specify multiple times for greater verbosity. Specifying it
twice will result in full verbosity, once medium verbosity and zero times least
verbosity.
AUTHOR
Kovid Goyal
COPYRIGHT
Kovid Goyal