Provided by: arduino_1.8.19+dfsg1-1_amd64
arduino - Integrated development environment for Arduino boards
arduino [FILE.ino...] arduino [--verify|--upload] [--board package:arch:board[:parameters]] [--port portname] [--pref name=value] [-v|--verbose] [--preserve-temp-files] [FILE.ino] arduino [--get-pref [preference]] arduino [--install-boards package name:platform architecture[:version]] arduino [--install-library library name[:version][,library name[:version],library name[:version]] arduino [--version]
The arduino integrated development environment allows editing, compiling and uploading sketches (programs) for Arduino (and compatible) microcontroller boards. Normally, running the arduino command starts the IDE, optionally loading any .ino files specified on the commandline. Alternatively, if any of the following command line options is given, no graphical interface will be shown and instead a one-off verify (compile) or upload will be done. A single .ino file should be given. If the sketch contains multiple .ino files, any one can be specified on the commandline, but the entire sketch will be compiled. When running in a one-off mode, it might be useful to set the build.path preference to allow keeping intermediate build results between multiple runs and only recompile the files that changed. Note that on MacOS X, the main executable is Arduino.app/Contents/MacOS/Arduino instead of arduino. Note that on Windows, due to the diffence between GUI and console apps, that the arduino_debug.exe is the appropriate executable to use if you want to use the majority of these command line options. The arduino.exe GUI version of the launcher may perform some of the functions described below, but will not output any messages to the console, meaning it is pretty useless if you want any feedback or to be able to keep log files for automated testing, etc. ACTIONS --verify Build the sketch. --upload Build and upload the sketch. --get-pref [preference] Prints the value of the given preference to the standard output stream. When the value does not exist, nothing is printed and the exit status is set (see EXIT STATUS below). If no preference is given as parameter, it prints all preferences. --install-boards package name:platform architecture[:version] Fetches available board support (platform) list and install the specified one, along with its related tools. If version is omitted, the latest is installed. If a platform with the same version is already installed, nothing is installed and program exits with exit code 1. If a platform with a different version is already installed, it’s replaced. --install-library library name[:version] Fetches available libraries list and install the specified one. If version is omitted, the latest is installed. If a library with the same version is already installed, nothing is installed and program exits with exit code 1. If a library with a different version is already installed, it’s replaced. Multiple libraries can be specified, separated by a comma. --version Print the version information and exit.
--board package:arch:board[:parameters] Select the board to compile for. • package is the identifier of the vendor (the first level folders inside the hardware directory). Default arduino boards use arduino. • architecture is the architecture of the board (second level folders inside the hardware directory). Default arduino boards use either arduino:avr for all AVR-based boards (like Uno, Mega or Leonardo) or arduino:sam for 32bit SAM-based boards (like Arduino Due). • board is the actual board to use, as defined in boards.txt contained in the architecture folder selected. For example, arduino:avr:uno for the Arduino Uno, arduino:avr:diecimila for the Arduino Duemilanove or Diecimila, or arduino:avr:mega for the Arduino Mega. • parameters is a comma-separated list of boards specific parameters that are normally shown under submenus of the "Tools" menu. For example arduino:avr:nano:cpu=atmega168 to Select the mega168 variant of the Arduino Nano board. If this option is not passed, the value from the current preferences is used (e.g., the last board selected in the IDE). --port portname Select the serial port to perform upload of the sketch. On linux and MacOS X, this should be the path to a device file (e.g., /dev/ttyACM0). On Windows, this should be the name of the serial port (e.g., COM3). If this option is not passed, the value from the current preferences is used (e.g., the last port selected in the IDE). --verbose-build Enable verbose mode during build. If this option is not given, verbose mode during build is disabled regardless of the current preferences. --preserve-temp-files Keep temporary files (preprocessed sketch, object files...) after termination. If omitted, temporary files are deleted. This option is only valid together with --verify or --upload. --useprogrammer Upload using a programmer. Set if you’re using an external programmer, or using the Arduino as ISP. --verbose-upload Enable verbose mode during upload. If this option is not given, verbose mode during upload is disabled regardless of the current preferences. This option is only valid together with --verify or --upload. -v, --verbose Enable verbose mode during build and upload. This option has the same effect of using both --verbose-build and --verbose-upload. This option is only valid together with --verify or --upload. --preferences-file filename Read and store preferences from the specified filename instead of the default one. --pref name=value Sets the preference name to the given value. Note that the preferences you set with this option are not validated: Invalid names will be set but never used, invalid values might lead to an error later on. --save-prefs Save any (changed) preferences to preferences.txt. In particular --board, --port, --pref, --verbose, --verbose-build and --verbose-upload may alter the current preferences.
Arduino keeps a list of preferences, as simple name and value pairs. Below, a few of them are documented but a lot more are available. sketchbook.path The path where sketches are (usually) stored. This path can also contain some special subdirectories (see FILES below). update.check When set to true, the IDE checks for a new version on startup. editor.external When set to true, use an external editor (the IDE does not allow editing and reloads each file before verifying). build.path The path to use for building. This is where things like the preprocessed .cpp file, compiled .o files and the final .hex file go. If set, this directory should already exist before running the arduino command. If this preference is not set (which is normally the case), a new temporary build folder is created on every run and deleted again when the application is closed.
0 Success 1 Build failed or upload failed 2 Sketch not found 3 Invalid (argument for) commandline option 4 Preference passed to --get-pref does not exist
%LOCALAPPDATA%/Arduino15/preferences.txt (Windows), ~/Library/Arduino15/preferences.txt (Max OS X), ~/.arduino15/preferences.txt (Linux) This file stores the preferences used for the IDE, building and uploading sketches. My Documents/Arduino/ (Windows), ~/Documents/Arduino/ (Mac OS X), ~/Arduino/ (Linux) This directory is referred to as the "Sketchbook" and contains the user’s sketches. The path can be changed through the sketchbook.path preference. Apart from sketches, three special directories can be inside the sketchbook: libraries Libraries can be put inside this directory, one library per subdirectory. hardware Support for third-party hardware can be added through this directory. tools External code-processing tools (that can be run through the Tools menu of the IDE) can be added here.
Start the Arduino IDE, with two files open: arduino /path/to/sketch/sketch.ino /path/to/sketch/extra.ino Compile and upload a sketch using the last selected board and serial port arduino --upload /path/to/sketch/sketch.ino Compile and upload a sketch to an Arduino Nano, with an Atmega168 CPU, connected on port /dev/ttyACM0: arduino --board arduino:avr:nano:cpu=atmega168 --port /dev/ttyACM0 --upload /path/to/sketch/sketch.ino Compile a sketch, put the build results in the build directory an re-use any previous build results in that directory. arduino --pref build.path=/path/to/sketch/build --verify /path/to/sketch/sketch.ino Change the selected board and build path and do nothing else. arduino --pref build.path=/path/to/sketch/build --board arduino:avr:uno --save-prefs Install latest SAM board support arduino --install-boards "arduino:sam" Install AVR board support, 1.6.2 arduino --install-boards "arduino:avr:1.6.2" Install Bridge library version 1.0.0 arduino --install-library "Bridge:1.0.0" Install Bridge and Servo libraries arduino --install-library "Bridge:1.0.0,Servo:1.2.0"
1.5.2 Added initial commandline support. This introduced --verify, --upload, --board, --port, --verbose and -v. 1.5.5 Added support for board-specific parameters to --board. Sketch filenames are now interpreted relative to the current directory instead of the location of the arduino command itself. 1.5.6 Introduced --pref, --preferences-file, --verbose-build and --verbose-upload. Preferences set through --pref are remembered, preferences set through --board, --port or the --verbose options are not. When running with --verify or --upload, the full GUI is no longer shown. Error messages still use a graphical popup and on Windows, the splash screen is still shown. 1.5.8 Introduced --save-prefs. 1.6.2 Main executable in MacOS X changed from Arduino.app/Contents/MacOS/JavaApplicationStub to Arduino.app/Contents/MacOS/Arduino. 1.6.4 Introduced --install-boards and --install-library. --pref options are now not saved to the preferences file, just like --board and --port, unless --save-prefs is specified. A path passed to --preferences-file, or set in the build.path, preferences.path or settings.path is now interpreted relative to the current directory instead of the location of the arduino command itself.
Web site: http://www.arduino.cc/ Help on projects and programming: http://forum.arduino.cc/ Report bugs: http://github.com/arduino/Arduino/issues IDE and framework development mailing list: https://groups.google.com/a/arduino.cc/forum/#!forum/developers 12/27/2021 ARDUINO(1)