Provided by: buildah_1.23.1+ds1-2_amd64 
NAME
buildah-run - Run a command inside of the container.
SYNOPSIS
buildah run [options] [--] container command
DESCRIPTION
Launches a container and runs the specified command in that container using the
container's root filesystem as a root filesystem, using configuration settings inherited
from the container's image or as specified using previous calls to the buildah config
command. To execute buildah run within an interactive shell, specify the --tty option.
OPTIONS
--add-history
Add an entry to the history which will note what command is being invoked. Defaults to
false.
Note: You can also override the default value of --add-history by setting the
BUILDAH_HISTORY environment variable. export BUILDAH_HISTORY=true
--cap-add=CAP_xxx
Add the specified capability to the set of capabilities which will be granted to the
specified command. Certain capabilities are granted by default; this option can be used
to add more beyond the defaults, which may have been modified by --cap-add and --cap-drop
options used with the buildah from invocation which created the container.
--cap-drop=CAP_xxx
Add the specified capability from the set of capabilities which will be granted to the
specified command. The CAP_AUDIT_WRITE, CAP_CHOWN, CAP_DAC_OVERRIDE, CAP_FOWNER,
CAP_FSETID, CAP_KILL, CAP_MKNOD, CAP_NET_BIND_SERVICE, CAP_SETFCAP, CAP_SETGID,
CAP_SETPCAP, CAP_SETUID, and CAP_SYS_CHROOT capabilities are granted by default; this
option can be used to remove them from the defaults, which may have been modified by
--cap-add and --cap-drop options used with the buildah from invocation which created the
container.
If a capability is specified to both the --cap-add and --cap-drop options, it will be
dropped, regardless of the order in which the options were given.
--cni-config-dir=directory
Location of CNI configuration files which will dictate which plugins will be used to
configure network interfaces and routing inside the running container, if the container
will be run in its own network namespace, and networking is not disabled.
--cni-plugin-path=directory[:directory[:directory[...]]]
List of directories in which the CNI plugins which will be used for configuring network
namespaces can be found.
--env, -e env=value
Temporarily add a value (e.g. env=value) to the environment for the running process.
Unlike buildah config --env, the environment will not persist to later calls to buildah
run or to the built image. Can be used multiple times.
--hostname
Set the hostname inside of the running container.
--ipc how
Sets the configuration for the IPC namespaces for the container. The configured value can
be "" (the empty string) or "private" to indicate that a new IPC namespace should be
created, or it can be "host" to indicate that the IPC namespace in which buildah itself is
being run should be reused, or it can be the path to an IPC namespace which is already in
use by another process.
--isolation type
Controls what type of isolation is used for running the process. Recognized types include
oci (OCI-compatible runtime, the default), rootless (OCI-compatible runtime invoked using
a modified configuration, with --no-new-keyring added to its create invocation, reusing
the host's network and UTS namespaces, and creating private IPC, PID, mount, and user
namespaces; the default for unprivileged users), and chroot (an internal wrapper that
leans more toward chroot(1) than container technology, reusing the host's control group,
network, IPC, and PID namespaces, and creating private mount and UTS namespaces, and
creating user namespaces only when they're required for ID mapping).
Note: You can also override the default isolation type by setting the BUILDAH_ISOLATION
environment variable. export BUILDAH_ISOLATION=oci
--mount=type=TYPE,TYPE-SPECIFIC-OPTION[,...]
Attach a filesystem mount to the container
Current supported mount TYPES are bind, and tmpfs. [1] ⟨#Footnote1⟩
e.g.
type=bind,source=/path/on/host,destination=/path/in/container
type=tmpfs,tmpfs-size=512M,destination=/path/in/container
Common Options:
· src, source: mount source spec for bind and volume. Mandatory for bind.
· dst, destination, target: mount destination spec.
· ro, read-only: true or false (default).
Options specific to bind:
· bind-propagation: shared, slave, private, rshared, rslave, or rprivate(default). See also mount(2).
. bind-nonrecursive: do not setup a recursive bind mount. By default it is recursive.
Options specific to tmpfs:
· tmpfs-size: Size of the tmpfs mount in bytes. Unlimited by default in Linux.
· tmpfs-mode: File mode of the tmpfs in octal. (e.g. 700 or 0700.) Defaults to 1777 in Linux.
--network, --net=mode
Sets the configuration for the network namespace for the container.
• none: no networking;
• host: use the host network stack. Note: the host mode gives the container full
access to local system services such as D-bus and is therefore considered
insecure;
• ns:path: path to a network namespace to join;
• private: create a new namespace for the container (default)
--pid how
Sets the configuration for the PID namespace for the container. The configured value can
be "" (the empty string) or "private" to indicate that a new PID namespace should be
created, or it can be "host" to indicate that the PID namespace in which buildah itself is
being run should be reused, or it can be the path to a PID namespace which is already in
use by another process.
--runtime path
The path to an alternate OCI-compatible runtime. Default is runc, or crun when machine is
configured to use cgroups V2.
Note: You can also override the default runtime by setting the BUILDAH_RUNTIME environment
variable. export BUILDAH_RUNTIME=/usr/bin/crun
--runtime-flag flag
Adds global flags for the container runtime. To list the supported flags, please consult
the manpages of the selected container runtime. Note: Do not pass the leading -- to the
flag. To pass the runc flag --log-format json to buildah run, the option given would be
--runtime-flag log-format=json.
--no-pivot
Do not use pivot root to jail process inside rootfs. This should be used whenever the
rootfs is on top of a ramdisk.
Note: You can make this option the default by setting the BUILDAH_NOPIVOT environment
variable. export BUILDAH_NOPIVOT=true
-t, --tty, --terminal
By default a pseudo-TTY is allocated only when buildah's standard input is attached to a
pseudo-TTY. Setting the --tty option to true will cause a pseudo-TTY to be allocated
inside the container connecting the user's "terminal" with the stdin and stdout stream of
the container. Setting the --tty option to false will prevent the pseudo-TTY from being
allocated.
--user user[:group]
Set the user to be used for running the command in the container. The user can be
specified as a user name or UID, optionally followed by a group name or GID, separated by
a colon (':'). If names are used, the container should include entries for those names in
its /etc/passwd and /etc/group files.
--uts how
Sets the configuration for the UTS namespace for the container. The configured value can
be "" (the empty string) or "private" to indicate that a new UTS namespace should be
created, or it can be "host" to indicate that the UTS namespace in which buildah itself is
being run should be reused, or it can be the path to a UTS namespace which is already in
use by another process.
--volume, -v source:destination:options
Create a bind mount. If you specify, -v /HOST-DIR:/CONTAINER-DIR, Buildah bind mounts
/HOST-DIR in the host to /CONTAINER-DIR in the Buildah container. The OPTIONS are a comma
delimited list and can be: [1] ⟨#Footnote1⟩
• [rw|ro]
• [U]
• [z|Z]
• [[r]shared|[r]slave|[r]private]
The CONTAINER-DIR must be an absolute path such as /src/docs. The HOST-DIR must be an
absolute path as well. Buildah bind-mounts the HOST-DIR to the path you specify. For
example, if you supply /foo as the host path, Buildah copies the contents of /foo to the
container filesystem on the host and bind mounts that into the container.
You can specify multiple -v options to mount one or more mounts to a container.
Write Protected Volume Mounts
You can add the :ro or :rw suffix to a volume to mount it read-only or read-write mode,
respectively. By default, the volumes are mounted read-write. See examples.
Chowning Volume Mounts
By default, Buildah does not change the owner and group of source volume directories
mounted into containers. If a container is created in a new user namespace, the UID and
GID in the container may correspond to another UID and GID on the host.
The :U suffix tells Buildah to use the correct host UID and GID based on the UID and GID
within the container, to change the owner and group of the source volume.
Labeling Volume Mounts
Labeling systems like SELinux require that proper labels are placed on volume content
mounted into a container. Without a label, the security system might prevent the processes
running inside the container from using the content. By default, Buildah does not change
the labels set by the OS.
To change a label in the container context, you can add either of two suffixes :z or :Z to
the volume mount. These suffixes tell Buildah to relabel file objects on the shared
volumes. The z option tells Buildah that two containers share the volume content. As a
result, Buildah labels the content with a shared content label. Shared volume labels allow
all containers to read/write content. The Z option tells Buildah to label the content
with a private unshared label. Only the current container can use a private volume.
By default bind mounted volumes are private. That means any mounts done inside container
will not be visible on the host and vice versa. This behavior can be changed by specifying
a volume mount propagation property.
When the mount propagation policy is set to shared, any mounts completed inside the
container on that volume will be visible to both the host and container. When the mount
propagation policy is set to slave, one way mount propagation is enabled and any mounts
completed on the host for that volume will be visible only inside of the container. To
control the mount propagation property of the volume use the :[r]shared, :[r]slave or
:[r]private propagation flag. The propagation property can be specified only for bind
mounted volumes and not for internal volumes or named volumes. For mount propagation to
work on the source mount point (the mount point where source dir is mounted on) it has to
have the right propagation properties. For shared volumes, the source mount point has to
be shared. And for slave volumes, the source mount has to be either shared or slave. [1]
⟨#Footnote1⟩
Use df <source-dir> to determine the source mount and then use findmnt -o
TARGET,PROPAGATION <source-mount-dir> to determine propagation properties of source mount,
if findmnt utility is not available, the source mount point can be determined by looking
at the mount entry in /proc/self/mountinfo. Look at optional fields and see if any
propagation properties are specified. shared:X means the mount is shared, master:X means
the mount is slave and if nothing is there that means the mount is private. [1]
⟨#Footnote1⟩
To change propagation properties of a mount point use the mount command. For example, to
bind mount the source directory /foo do mount --bind /foo /foo and mount --make-private
--make-shared /foo. This will convert /foo into a shared mount point. The propagation
properties of the source mount can be changed directly. For instance if / is the source
mount for /foo, then use mount --make-shared / to convert / into a shared mount.
--workingdir directory
Temporarily set the working directory for the running process. Unlike buildah config
--workingdir, the workingdir will not persist to later calls to buildah run or the built
image.
NOTE: End parsing of options with the -- option, so that other options can be passed to
the command inside of the container.
EXAMPLE
buildah run containerID -- ps -auxw
buildah run --hostname myhost containerID -- ps -auxw
buildah run containerID -- sh -c 'echo $PATH'
buildah run --runtime-flag log-format=json containerID /bin/bash
buildah run --runtime-flag debug containerID /bin/bash
buildah run --tty containerID /bin/bash
buildah run --tty=false containerID ls /
buildah run --volume /path/on/host:/path/in/container:ro,z containerID sh
buildah run -v /path/on/host:/path/in/container:z,U containerID sh
buildah run --mount type=bind,src=/tmp/on:host,dst=/in:container,ro containerID sh
SEE ALSO
buildah(1), buildah-from(1), buildah-config(1), namespaces(7), pid_namespaces(7), crun(1),
runc(8)
FOOTNOTES
1: The Buildah project is committed to inclusivity, a core value of open source. The
master and slave mount propagation terminology used here is problematic and divisive, and
should be changed. However, these terms are currently used within the Linux kernel and
must be used as-is at this time. When the kernel maintainers rectify this usage, Buildah
will follow suit immediately.