Provided by: libfyaml-utils_0.7.12-1_amd64 
NAME
fy-tool - fy-tool documentation
SYNOPSIS
fy-tool [OPTIONS] [<file> ...]
fy-dump [OPTIONS] [<file> ...]
fy-testsuite [OPTIONS] <file>
fy-filter [OPTIONS] [-f*FILE*] [<path> ...]
fy-join [OPTIONS] [-T*PATH*] [-F*PATH*] [-t*PATH*] [<file> ...]
fy-ypath [OPTIONS] <ypath-expression> [<*file> ...]
fy-compose [OPTIONS] [<file> ...]
DESCRIPTION
fy-tool is a general YAML/JSON manipulation tool using libfyaml. Its operation is
different depending on how it's called, either via aliases named fy-dump, fy-testsuite,
fy-filter, fy-join, or via the --dump, --testsuite, --filter, --join, --ypath and
--compose options.
• In dump mode it will parse YAML/JSON input files and output YAML/JSON according to the
output format options.
• In testsuite mode it will parse a single YAML input file and output yaml testsuite
reference output.
• In filter mode it will parse YAML/JSON files and output YAML/JSON output filtered
according to the given option.
• In join mode it will parse YAML/JSON files and join them into a single YAML/JSON
document according to the given command line options.
• In ypath mode it will parse YAML/JSON files and execute a ypath query which will output
a document stream according to the results. This is an experimental mode under
development, where the syntax is not yet decided completely.
• In compose mode, it operates similarly to dump, but the document tree is created using
the built-in composer API.
OPTIONS
A number of options are common for all the different modes of operation and they are as
follows: Common options.INDENT 0.0
-q, --quiet
Quiet operation, does not output informational messages at all.
-h, --help
Display usage information.
-v, --version
Display version information.
-I DIR, --include=DIR
Add the DIR directory to the search path which will be used to locate a YAML/JSON
file. The default path is set to ""
-d LEVEL, --debug-level=LEVEL
Set the minimum numeric debug level value of the library to LEVEL. The numeric
value must be in the range of 0 to 4 and their meaning is as follows:
• 0 (DEBUG)
Internal library debugging messages. No output is produced when the library was
compiled with --disable-debug
• 1 (INFO)
Informational messages about the internal operation of the library.
• 2 (NOTICE)
Messsages that could require attention.
• 3 (WARNING)
A warning message, something is wrong, but operation can continue. This is the
default value.
• 4 (ERROR)
A fatal error occured, it is impossible to continue.
The default level is 3 (WARNING), which means that messages with level 3 and higher
will be displayed.
Parser Options.INDENT 0.0
-j JSONOPT, --json=JSONOPT
Marks the input files as JSON or YAML accordingly to:
• no
The input files are always in YAML mode.
• force
The input files are always set to JSON mode.
• auto
The input files are set to JSON mode automatically when the file's extension is
.json. This is the default.
JSON support is complete so all valid JSON files are parsed according to JSON
rules, even where those differ with YAML rules.
--yaml-1.1
Force YAML 1.1 rules, when input does not specify a version via a directive.
--yaml-1.2
Force YAML 1.2 rules, when input does not specify a version via a directive.
--yaml-1.3
Force YAML 1.3 rules, when input does not specify a version via a directive. This
option is experimental since the 1.3 spec is not yet released.
--disable-accel
Disable use of acceleration features; use less memory but potentially more CPU.
--disable-buffering
Disable use stdio bufferring, reads will be performed via unix fd reads. This may
reduce latency when reading from a network file descriptor, or similar.
--disable-depth-limit
Disable the object depth limit, which is usually set to a value near 60. Using
this option is is possible to process even pathological inputs when using the
default non-recursive build mode.
--prefer-recursive
Prefer recursive build methods, instead of iterative. This field is merely here for
evaluation purposes and will be removed in a future version.
--sloppy-flow-indentation
Use sloppy flow indentation, where indentation is not taken into account in flow
mode, even when the input is invalid YAML according to the spec.
--ypath-aliases
Process aliases using ypaths. Experimental option.
--streaming
Only valid when in dump mode, enables streaming mode. This means that no in-memory
graph tree is constructed, so indefinite and arbitrary large YAML input streams can
be processed.
Note that in streaming mode:
• Key duplication checks are disabled.
• No reording of key order is possible when emitting (i.e. --sort is not
available).
• Alias resolution is not available (i.e. --resolve).
Resolver Options.INDENT 0.0
-r, --resolve
Perform anchor and merge key resolution. By default this option is disabled.
-l, --follow
Follow aliases when performing path traversal. By default this option is disabled.
Testsuite Options.INDENT 0.0
--disable-flow-markers
Do not output flow-markers for the testsuite output.
-i INDENT, --indent=INDENT
Sets the emitter indent (in spaces). Default is 2.
-w WIDTH, --width=WIDTH
Sets the preferred output width of the emitter. It is generally impossible to
strictly adhere to this limit so this is treated as a hint at best. It not valid
in any oneline output modes (i.e. flow-oneline or json-oneline). Default value is
80.
-m MODE, --mode=MODE
Sets the output mode of the YAML emitted. Possible values are:
• original
The original formatting used in the input. This is default mode.
• block
The output is forced to be in block mode. All flow constructs will be converted
to block mode.
• flow
The output is forced to be in flow mode. All block constructs will be converted
to flow mode.
• flow-oneline
The output is forced to be in flow mode, but no newlines will be emitted; the
output is going to be a (potentially very) long line.
• json
The output is forced to be in JSON mode. Note that it is impossible to output an
arbitrary YAML file as JSON, so this may fail.
• json-oneline
The output is forced to be in JSON mode and in a single line.
• dejson
Output is in block YAML mode but with special care to convert JSON quoted strings
in as non-idiomatic YAML as possible. For example { foo: "this is a test" } will
be emitted as foo: this is a test. YAML can handle scalars without using
excessive quoting.
-C MODE, --color=MODE
It is possible to colorize output using ANSI color escape sequences, and the mode
can be one of:
• off
Never colorize output.
• on
Always colorize output.
• auto
Automatically colorize output when the output is a terminal. This is the
default.
-V, --visible
Make all whitespace (spaces, unicode spaces and linebreaks) visible. Note that
this is performed using UTF8 characters so it will not work on non-UTF8 terminals,
or a non-UTF8 complete font.
-s, --sort
Sort keys on output. This option is disabled by default.
-c, --comment
Experimental output comments option. Enabled output while preserving comments.
Disabled by default.
--strip-labels
Strip labels on output. Disabled by default.
--strip-tags
Strip tags on output. Disabled by default.
--strip-doc
Strip document indicators on output. Disabled by default.
--null-output
Do not generate any output, useful for profiling the parser.
YPATH options.INDENT 0.0
--dump-pathexpr
Dump the produced path expression for debugging.
--no-exec
Do not execute the expression. Useful when used with --dump-pathexpr
Compose options.INDENT 0.0
--dump-path
Dump the path while composing.
--dump Select dump mode of operation. This is the default. This mode is also enabled when
the called binary is aliased to fy-dump.
In this mode, all files provided in the command line will be dumped in one
continuous stream, to the standard output, using document start indicators to mark
the start of end new file.
If the file provided is - then the input is the standard input.
--testsuite
Select testsuite mode of operation. This mode is also enabled when the called
binary is aliased to fy-testsuite.
In this mode, a single YAML file is read and an event stream is generated which is
the format used for yaml-testsuite compliance.
If the file provided is - then the input is the standard input.
--filter
Select filter mode of operation. This mode is also enabled when the called binary
is aliased to fy-filter.
In this mode, a single YAML file is read from the standard input for each path that
is provided in the command line a document will be produced to the standard output.
To use file instead of standard input use the -f/--file option.
If the file provided is - then the input is the standard input.
-f FILE, --file=FILE
Use the given file as input instead of standard input.
If first character of FILE is > the the input is the content of the option
that follows. For example --file ">foo: bar" is as --file file.yaml with
file.yaml "foo: bar"
--join Select join mode of operation. This mode is also enabled when the called binary is
aliased to fy-join.
In this mode, multiple YAML files are joined into a single document, emitted to the
standard output.
If the file provided is - then the input is the standard input.
-T PATH, --to=PATH
The target path of the join. By default this is the root /.
If first character of FILE is > the the input is the content of the option
that follows.
-F PATH, --from=PATH
The origin path of the join (for each input). By default this is the root /.
If first character of FILE is > the the input is the content of the option
that follows.
-t PATH, --trim=PATH
Trim path of the output of the join. By default this is the root /.
If first character of FILE is > the the input is the content of the option
that follows.
--ypath
Process files and output query results using ypath.
--compose
Use the composer API to build the document instead of direct events.
EXAMPLES
Example input files
We're going to be using a couple of YAML files in our examples.
invoice.yaml
# invoice.yaml
invoice: 34843
date : !!str 2001-01-23
bill-to: &id001
given : Chris
family : Dumars
address:
lines: |
458 Walkman Dr.
Suite #292
simple-anchors.yaml
# simple-anchors.yaml
foo: &label { bar: frooz }
baz: *label
mergekeyspec.yaml
---
- &CENTER { x: 1, y: 2 }
- &LEFT { x: 0, y: 2 }
- &BIG { r: 10 }
- &SMALL { r: 1 }
# All the following maps are equal:
- # Explicit keys
x: 1
y: 2
r: 10
label: center/big
- # Merge one map
<< : *CENTER
r: 10
label: center/big
- # Merge multiple maps
<< : [ *CENTER, *BIG ]
label: center/big
- # Override
<< : [ *BIG, *LEFT, *SMALL ]
x: 1
label: center/big
bomb.yaml
a: &a ["lol","lol","lol","lol","lol","lol","lol","lol","lol"]
b: &b [*a,*a,*a,*a,*a,*a,*a,*a,*a]
c: &c [*b,*b,*b,*b,*b,*b,*b,*b,*b]
d: &d [*c,*c,*c,*c,*c,*c,*c,*c,*c]
e: &e [*d,*d,*d,*d,*d,*d,*d,*d,*d]
f: &f [*e,*e,*e,*e,*e,*e,*e,*e,*e]
g: &g [*f,*f,*f,*f,*f,*f,*f,*f,*f]
fy-dump examples.
Parse and dump generated YAML document tree in the original YAML form
$ fy-dump invoice.yaml
invoice: 34843
date: !!str 2001-01-23
bill-to: &id001
given: Chris
family: Dumars
address:
lines: |
458 Walkman Dr.
Suite #292
Parse and dump generated YAML document tree in flow YAML form
$ fy-dump -mflow invoice.yaml
{
invoice: 34843,
date: !!str 2001-01-23,
bill-to: &id001 {
given: Chris,
family: Dumars,
address: {
lines: "458 Walkman Dr.\nSuite #292\n"
}
}
}
Parse and dump generated YAML document from the input string
$ fy-dump -mjson ">foo: bar"
{
"foo": "bar"
}
Using the resolve option on the simple-anchors.yaml
$ fy-dump -r simple-anchor.yaml
foo: &label {
bar: frooz
}
baz: {
bar: frooz
}
Stripping the labels too:
$ fy-dump -r --strip-label simple-anchor.yaml
foo: {
bar: frooz
}
baz: {
bar: frooz
}
Merge key support:
$ fy-dump -r --strip-label mergekeyspec.yaml
---
- {
x: 1,
y: 2
}
- {
x: 0,
y: 2
}
- {
r: 10
}
- {
r: 1
}
- x: 1
y: 2
r: 10
label: center/big
- y: 2
x: 1
r: 10
label: center/big
- r: 10
y: 2
x: 1
label: center/big
- y: 2
r: 10
x: 1
label: center/big
Sorting option:
$ fy-dump -s invoice.yaml
bill-to: &id001
address:
lines: |
458 Walkman Dr.
Suite #292
family: Dumars
given: Chris
date: !!str 2001-01-23
invoice: 34843
fy-testsuite example.
An example using the testsuite mode generates the following event stream from invoice.yaml
Parse and dump test-suite event format
$ fy-testsuite invoice.yaml
fy-filter examples.
Filter out from the /bill-to path of invoice.yaml
$ cat invoice.yaml | fy-filter /bill-to
&id001
given: Chris
family: Dumars
address:
lines: |
458 Walkman Dr.
Suite #292
Filter example with arrays (and use the --file option)
$ fy-filter --file=mergekeyspec.yaml /5
---
<<: *CENTER
r: 10
label: center/big
Follow anchors example
$ fy-filter --file=simple-anchors.yaml /baz/bar
frooz
Handle YAML bombs (if you can spare the memory and cpu time)
$ fy-filter --file=bomb.yaml -r / | wc -l
6726047
You don't have to, you can just follow links to retrieve data.
$ fy-filter --file=stuff/bomb.yaml -l --strip-label /g/0/1/2/3/4/5/6
"lol"
Following links works with merge keys too:
$ fy-filter --file=mergekeyspec.yaml -l --strip-label /5/x
--- 1
fy-join examples.
Joining two YAML files that have root mappings.
$ fy-join simple-anchors.yaml invoice.yaml
foo: &label {
bar: frooz
}
baz: *label
invoice: 34843
date: !!str 2001-01-23
bill-to: &id001
given: Chris
family: Dumars
address:
lines: |
458 Walkman Dr.
Suite #292
Join two files with sequences at root:
$ fy-join -mblock ">[ foo, bar ]" ">[ baz ]"
- foo
- bar
- baz
AUTHOR
Pantelis Antoniou <pantelis.antoniou@konsulko.com>
BUGS
• The only supported input and output character encoding is UTF8.
• Sorting does not respect language settings.
• There is no way for the user to specific a different coloring scheme.
SEE ALSO
libfyaml(1)
COPYRIGHT
2019, Pantelis Antoniou
Jan 14, 2022 FY-TOOL(1)