Provided by: genometools_1.6.2+ds-2_amd64 bug

NAME

       gt-hop - Cognate sequence-based homopolymer error correction.

SYNOPSIS

       gt hop -<mode> -c <encseq> -map <sam/bam> -reads <fastq> [options...]

DESCRIPTION

       -c [string]
           cognate sequence (encoded using gt encseq encode)

       -map [string]
           mapping of reads to the cognate sequence it must be in SAM/BAM format, and sorted by
           coordinate (can be prepared e.g. using: samtools sort)

       -sam [yes|no]
           mapping file is SAM default: BAM

       -aggressive [yes|no]
           correct as much as possible

       -moderate [yes|no]
           mediate between sensitivity and precision

       -conservative [yes|no]
           correct only most likely errors

       -expert [yes|no]
           manually select correction criteria

       -reads
           uncorrected read file(s) in FastQ format; the corrected reads are output in the
           currect working directory in files which are named as the input files, each prepended
           by a prefix (see -outprefix option) -reads allows one to output the reads in the same
           order as in the input and is mandatory if the SAM contains more than a single primary
           alignment for each read (e.g. output of bwasw) see also -o option as an alternative

       -outprefix [string]
           prefix for output filenames (corrected reads)when -reads is specified the prefix is
           prepended to each input filename (default: hop_)

       -o [string]
           output file for corrected reads (see also -reads/-outprefix) if -o is used, reads are
           output in a single file in the order they are found in the SAM file (which usually
           differ from the original order) this will only work if the reads were aligned with a
           software which only includes 1 alignment for each read (e.g. bwa) (default: undefined)

       -hmin [value]
           minimal homopolymer length in cognate sequence (default: 3)

       -read-hmin [value]
           minimal homopolymer length in reads (default: 2)

       -qmax [value]
           maximal average quality of homopolymer in a read (default: 120)

       -altmax [value]
           max support of alternate homopol. length; e.g. 0.8 means: do not correct any read if
           homop. length in more than 80%% of the reads has the same value, different from the
           cognate if altmax is set to 1.0 reads are always corrected (default: 0.800000)

       -cogmin [value]
           min support of cognate sequence homopol. length; e.g. 0.1 means: do not correct any
           read if cognate homop. length is not present in at least 10%% of the reads if cogmin
           is set to 0.0 reads are always corrected

       -mapqmin [value]
           minimal mapping quality (default: 21)

       -covmin [value]
           minimal coverage; e.g. 5 means: do not correct any read if coverage (number of reads
           mapped over whole homopolymer) is less than 5 if covmin is set to 1 reads are always
           corrected (default: 1)

       -allow-muliple [yes|no]
           allow multiple corrections in a read (default: no)

       -clenmax [value]
           maximal correction length default: unlimited

       -ann [string]
           annotation of cognate sequence it must be sorted by coordinates on the cognate
           sequence (this can be e.g. done using: gt gff3 -sort) if -ann is used, corrections
           will be limited to homopolymers startingor ending inside the feature type indicated by
           -ft optionformat: sorted GFF3 (default: undefined)

       -ft [string]
           feature type to use when -ann option is specified (default: CDS)

       -v [yes|no]
           be verbose (default: no)

       -help
           display help for basic options and exit

       -help+
           display help for all options and exit

       -version
           display version information and exit

       Correction mode:

       One of the options -aggressive, -moderate, -conservative or -expert must be selected.

       The -aggressive, -moderate and -conservative modes are presets of the criteria by which it
       is decided if an observed discrepancy in homopolymer length between cognate sequence and a
       read shall be corrected or not. A description of the single criteria is provided by using
       the -help+' option. The presets are equivalent to the following settings:

                               -aggressive    -moderate      -conservative
           -hmin               3              3              3
           -read-hmin          1              1              2
           -altmax             1.00           0.99           0.80
           -refmin             0.00           0.00           0.10
           -mapqmin            0              10             21
           -covmin             1              1              1
           -clenmax            unlimited      unlimited      unlimited
           -allow-multiple     yes            yes            no

       The aggressive mode tries to maximize the sensitivity, the conservative mode to minimize
       the false positives. An even more conservative set of corrections can be achieved using
       the -ann option (see -help+).

       The -expert mode allows one to manually set each parameter; the default values are the
       same as in the -conservative mode.

       (Finally, for evaluation purposes only, the -state-of-truth mode can be used: this mode
       assumes that the sequenced genome has been specified as cognate sequence and outputs an
       ideal list of corrections.)

REPORTING BUGS

       Report bugs to https://github.com/genometools/genometools/issues.