Provided by: ir-keytable_1.22.1-4_amd64 bug

NAME

       ir-keytable - a swiss-knife tool to handle Remote Controllers.

SYNOPSIS

       ir-keytable [OPTION]...

DESCRIPTION

       ir-keytable  is  a  tool  that  lists  Remote  Controller devices, loads rc keymaps, tests
       events, and adjusts other Remote Controller options.

       Rather than loading a rc keymap, it is also possible to set protocol decoders and  set  rc
       scancode to keycode mappings directly.

       Note: You need to have read permissions on /dev/input for most of the options to work.

OPTIONS

       -a, --auto-load=CFGFILE
              Auto-load keymaps, based on a configuration file. Only works with --sysdev.

       -c, --clear
              Clears the scancode to keycode mappings.

       -D, --delay=DELAY
              Sets the delay before repeating a keystroke.

       -k, --set-key=SCANKEY
              Set scancode to keycode mapping.

       -p, --protocol=PROTOCOL
              Comma  separated  list  of  kernel  protocols  or BPF protocol to enable. All other
              protocols are disabled.

       -e, --parameter=PARAMETER
              Comma separated list of parameters for the BPF protocol.

       -P, --period=PERIOD
              Sets the period to repeat a keystroke.

       -r, --read
              Read and show the current scancode to keycode mapping.

       -s, --sysdev=SYSDEV
              rc device to control, defaults to rc0 if not specified.

       -t, --test
              test if the rc device is generating events

       -v, --verbose
              Enables debug messages.

       -w, --write=KEYMAP
              Reads the protocols and scancode to keycode  mapping  from  the  KEYMAP  file,  and
              enables those on the rc device.

       -?, --help
              Prints the help message

       --usage
              Give a short usage message

       -V, --version
              print the v4l2-utils version

       Mandatory  or  optional  arguments  to long options are also mandatory or optional for any
       corresponding short options. Options can be combined together.

   The options arguments are:
       SYSDEV the rc device as found at /sys/class/rc

       KEYMAP a toml keymap file with a list of protocols and scancodes to keycode mappings.  The
              format is described in rc_keymap(5).

       SCANKEY
              a set of scancode1=keycode1,scancode2=keycode2.. value pairs

       PROTOCOL
              Comma  separated  list  of  kernel  protocols  to  be  enabled  (case insensitive).
              Supported kernel protocols are: nec, rc-5, rc-6, jvc, sony, sanyo, rc-5-sz,  sharp,
              mce-kbd,  xmp,  imon,  rc-mm,  other,  all.  It  can  also  be a BPF protocol, e.g.
              manchester, pulse_distance, pulse_length.  If it does not match any of these, it is
              taken to be the path of BPF decoder to be loaded.

       PARAMETERS
              Comma separated list of parameters for the BPF protocol being loaded. They have the
              format of name=value, where value is an number.

       DELAY  Delay before repeating a keystroke

       PERIOD Period to repeat a keystroke

       CFGFILE
              configuration file that associates a driver/keymap name with a keymap file

EXIT STATUS

       On success, it returns 0. Otherwise, it will return the error code.

EXAMPLES

       To list all connected Remote Controller devices:
            ir-keytable

       To clean the keycode mapping and use a newer one:
            ir-keytable -c -w /etc/rc_keymaps/nec_terratec_cinergy_xs.toml

       To append more codes to the existing table:
            ir-keytable -w /etc/rc_keymaps/nec_terratec_cinergy_xs.toml

       To read the current scancode to keycode mapping on the second remote controller:
            ir-keytable -s rc1 -r

       To enable NEC protocol and load a BPF protocol, with a parameter for the BPF protocol:
            ir-keytable -p nec,pulse_distance -e pulse_header=9000

       If you do not know what protocol a remote uses, it can be helpful to first  try  with  all
       kernel  decoders  enabled.  The  decoded  protocol  and scancodes will be displayed in the
       output:
            ir-keytable -c -p all -t

BUGS

       Report bugs to Linux Media Mailing List <linux-media@vger.kernel.org>

COPYRIGHT

       Copyright (c) 2010-2014 by Mauro Carvalho Chehab.

       License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>.
       This is free software: you are free to change and redistribute it.  There is NO  WARRANTY,
       to the extent permitted by law.

SEE ALSO

       The keymap format is described in rc_keymap(5).

       To transmit IR or receive raw IR, see ir-ctl(1).