Provided by: genisoimage_1.1.11-3.4_amd64 bug

NAME

       devdump,  isoinfo,  isovfy,  isodump  - Utility programs for dumping and verifying iso9660
       images.

SYNOPSIS

       devdump isoimage

       isodump isoimage

       isoinfo [ -d ] [ -h ] [ -R ] [ -J ] [ -j charset ] [ -f ] [ -l ] [ -p ] [ -T sector ] [ -N
       sector ] [ -i isoimage ] [ -x path ]

       isovfy isoimage

DESCRIPTION

       devdump  is  a crude utility to interactively display the contents of device or filesystem
       images.  The initial screen is a display of the first 256 bytes of  the  first  2048  byte
       sector.  The commands are the same as with isodump.

       isodump  is  a  crude  utility  to interactively display the contents of iso9660 images in
       order to verify directory integrity.  The initial screen is a display of the first part of
       the root directory, and the prompt shows you the extent number and offset in the extent.

              You  can  use  the  'a'  and 'b' commands to move backwards and forwards within the
              image. The 'g' command allows you to goto an arbitrary extent, and the 'f'  command
              specifies a search string to be used. The '+' command searches forward for the next
              instance of the search string, and the 'q' command exits devdump or isodump.

       isoinfo is a utility to perform directory like listings of iso9660 images.

       isovfy is a utility to verify the integrity of an iso9660 image.  Most  of  the  tests  in
       isovfy  were  added after bugs were discovered in early versions of genisoimage.  It isn't
       all that clear how useful this is anymore, but it doesn't hurt to have this around.

OPTIONS

       The options common to all programs are -help,-h,-version,  i=name,dev=name.   The  isoinfo
       program has additional command line options. The options are:

       -help

       -h     print a summary of all options.

       -d     Print  information  from  the primary volume descriptor (PVD) of the iso9660 image.
              This includes information about Rock Ridge, Joliet  extensions  and  Eltorito  boot
              information if present.

       -f     generate  output as if a 'find . -print' command had been run on the iso9660 image.
              You should not use the -l image with the -f option.

       -i iso_image
              Specifies the path of the iso9660 image that we wish to examine.   The  options  -i
              and dev=target are mutual exclusive.

       dev=target
              Sets   the  SCSI  target  for  the  drive,  see  notes  above.   A  typical  device
              specification is dev=6,0 .  If a  filename  must  be  provided  together  with  the
              numerical  target  specification,  the  filename  is  implementation specific.  The
              correct filename in this case can be found in the system specific  manuals  of  the
              target  operating system.  On a FreeBSD system without CAM support, you need to use
              the control device (e.g.  /dev/rcd0.ctl).  A correct device specification  in  this
              case may be dev=/dev/rcd0.ctl:@ .

              On  Linux, drives connected to a parallel port adapter are mapped to a virtual SCSI
              bus. Different adapters are mapped to different targets on this virtual SCSI bus.

              If no dev option is present, the program will  try  to  get  the  device  from  the
              CDR_DEVICE environment.

              If the argument to the dev= option does not contain the characters ',', '/', '@' or
              ':',  it  is  interpreted  as  an  label  name  that  may  be  found  in  the  file
              /etc/wodim.conf (see FILES section).

              The options -i and dev=target are mutual exclusive.

       -l     generate  output  as  if a 'ls -lR' command had been run on the iso9660 image.  You
              should not use the -f image with the -l option.

       -N sector
              Quick hack to help examine single session disc files that are to be  written  to  a
              multi-session  disc.  The sector number specified is the sector number at which the
              iso9660 image should be written when send to the cd-writer. Not used for the  first
              session on the disc.

       -p     Print path table information.

       -R     Extract  information  from Rock Ridge extensions (if present) for permissions, file
              names and ownerships.

       -J     Extract information from Joliet extensions (if present) for file names.

       -j charset
              Convert Joliet file names (if present) to the supplied charset. See  genisoimage(8)
              for details.

       -T sector
              Quick  hack to help examine multi-session images that have already been burned to a
              multi-session disc. The sector number specified is the sector number for the  start
              of the session we wish to display.

       -x pathname
              Extract specified file to stdout.

AUTHOR

       The   author   of   the   original   sources   (1993   ...   1998)   is   Eric   Youngdale
       <ericy@gnu.ai.mit.edu> or <eric@andante.jic.com> is  to  blame  for  these  shoddy  hacks.
       Joerg  Schilling wrote the SCSI transport library and its adaptation layer to the programs
       and newer parts (starting from 1999) of the  utilities,  this  makes  them  Copyright  (C)
       1999-2004 Joerg Schilling.  Patches to improve general usability would be gladly accepted.

       This  manpage  describes  the  program  implementation of isoinfo as shipped by the cdrkit
       distribution. See http://alioth.debian.org/projects/debburn/ for details. It is a  spinoff
       from  the  original program distributed in the cdrtools package [1]. However, the cdrtools
       developers are not involved in the development of this spinoff and therefore shall not  be
       made  responsible for any problem caused by it. Do not try to get support for this program
       by contacting the original author(s).

       If you have support questions, send them to

       debburn-devel@lists.alioth.debian.org

       If you have definitely found a bug, send a mail to this list or to

       submit@bugs.debian.org

       writing at least a short description into the Subject and "Package: cdrkit" into the first
       line of the mail body.

BUGS

       The user interface really sucks.

FUTURE IMPROVEMENTS

       These  utilities  are  really quick hacks, which are very useful for debugging problems in
       genisoimage or in an iso9660 filesystem. In the long run, it  would  be  nice  to  have  a
       daemon that would NFS export a iso9660 image.

       The isoinfo program is probably the program that is of the most use to the general user.

AVAILABILITY

       These  utilities  come  with  the  cdrkit  package,  and  the  primary  download  site  is
       http://debburn.alioth.debian.org/ and FTP mirrors of distributions.  Despite the name, the
       software is not beta.

ENVIRONMENT

       CDR_DEVICE
              This  may  either hold a device identifier that is suitable to the open call of the
              SCSI transport library or a label in the file /etc/wodim.conf.

       RSH    If the RSH environment is present, the remote connection will not  be  created  via
              rcmd(3)  but  by calling the program pointed to by RSH.  Use e.g.  RSH=/usr/bin/ssh
              to create a secure shell connection.

              Note that this forces the program to create  a  pipe  to  the  rsh(1)  program  and
              disallows  the  program to directly access the network socket to the remote server.
              This makes it impossible to set  up  performance  parameters  and  slows  down  the
              connection compared to a root initiated rcmd(3) connection.

       RSCSI  If the RSCSI environment is present, the remote SCSI server will not be the program
              /opt/schily/sbin/rscsi but the program pointed to by RSCSI.  Note that  the  remote
              SCSI  server  program  name will be ignored if you log in using an account that has
              been created with a remote SCSI server program as login shell.

FILES

       /etc/wodim.conf
              Default values can be set for the following options in /etc/wodim.conf.

              CDR_DEVICE
                     This may either hold a device identifier that is suitable to the  open  call
                     of  the  SCSI  transport library or a label in the file /etc/wodim.conf that
                     allows to identify a specific drive on the system.

              Any other label
                     is an identifier for a specific drive on the system.  Such an identifier may
                     not contain the characters ',', '/', '@' or ':'.

                     Each  line  that  follows  a  label  contains a TAB separated list of items.
                     Currently, four items are recognized: the SCSI ID of the drive, the  default
                     speed  that should be used for this drive, the default FIFO size that should
                     be used for this drive and drive specific options. The values for speed  and
                     fifosize  may  be  set to -1 to tell the program to use the global defaults.
                     The value for driveropts may be set to "" if  no  driveropts  are  used.   A
                     typical line may look this way:

                     teac1= 0,5,0   4    8m   ""

                     yamaha= 1,6,0  -1   -1   burnfree

                     This  tells  the program that a drive named teac1 is at scsibus 0, target 5,
                     lun 0 and should be used with speed 4 and a FIFO size of  8  MB.   A  second
                     drive  may be found at scsibus 1, target 6, lun 0 and uses the default speed
                     and the default FIFO size.

SEE ALSO

       genisoimage(1), wodim(1), readcd(1), ssh(1).

SOURCES

       [1] Cdrtools 2.01.01a08 from May 2006, http://cdrecord.berlios.de