Provided by: can-utils_2020.11.0-1_amd64 bug

NAME

       isotpsend - manual page for isotpsend 2020.11.0-1

SYNOPSIS

       isotpsend [options] <CAN interface>

OPTIONS

       -s <can_id>
              (source can_id. Use 8 digits for extended IDs)

       -d <can_id>
              (destination can_id. Use 8 digits for extended IDs)

       -x <addr>[:<rxaddr>]
              (extended addressing / opt. separate rxaddr)

       -p [tx]:[rx]
              (set and enable tx/rx padding bytes)

       -P <mode>
              (check rx padding for (l)ength (c)ontent (a)ll)

       -t <time ns>
              (frame transmit time (N_As) in nanosecs)

       -f <time ns>
              (ignore FC and force local tx stmin value in nanosecs)

       -D <len>
              (send a fixed PDU with len bytes - no STDIN data)

       -b     (block until the PDU transmission is completed)

       -L <mtu>:<tx_dl>:<tx_flags>
              (link layer options for CAN FD)

       CAN  IDs  and  addresses  are  given  and expected in hexadecimal values.  The pdu data is
       expected on STDIN in space separated ASCII hex values.