Provided by: libjpeg-tools_0.0~git20220615.842c7ba-2_amd64 
NAME
jpeg - jpeg compressor
SYNOPSIS
jpeg [options] source target
DESCRIPTION
jpeg Copyright (C) 2012-2018 Thomas Richter, University of Stuttgart and Accusoft
For license conditions, see README.license for details.
default is to decode the jpeg input and write a ppm output use -q [1..100] or -p to
enforce encoding
-q quality : selects the encoding mode and defines the quality of the base image
-Q quality : defines the quality for the extension layer
-quality q : use a profile and part specific weighting between base and extension
layer quality
-r : enable the residual codestream for HDR and lossless
coding, requires -q and -Q to define base and enhancement layer quality.
-r12 : use a 12 bit residual image instead of an 8 bit residual
image.
-rl : enforce a int-to-int lossless DCT in the residual domain
for lossless coding enabled by -Q 100
-ro : disable the DCT in the residual domain, quantize spatially for
near-lossless coding
-ldr file : specifies a separate file containing the base layer
for encoding.
-R bits : specify refinement bits for the base images.
This works like -r but in the DCT domain.
-rR bits : specify refinement bits for the residual image.
-N : enable noise shaping of the prediction residual
-U : disable automatic upsampling
-l : enable lossless coding without a residual image by an
int-to-int DCT, also requires -c and -q 100 for true lossless
-p : JPEG lossless (predictive) mode
also requires -c for true lossless
-c : disable the RGB to YCbCr decorrelation transformation
-xyz : indicates that the HDR image is in the XYZ colorspace
note that the image is not *converted* to this space, but is assumed to be encoded
in this space.
-cxyz : similar to the above, but uses the dedicated C transformation
to implement a XYZ colorspace conversion.
-sp : use separate LUTs for each component.
-md : use the median instead of the center of mass
for constructing the inverse TMO of ISO/IEC 18477-7 profile C.
-ct : use the center of mass instead of the median
for constructing the inverse TMO of ISO/IEC 18477-7 profile C.
-sm iter : use <iter> iterations to smooth out the histogram for
inverse-TMO based algorithms. Default is not to smooth the histogram.
-ncl : disable clamping of out-of-gamut colors.
this is automatically enabled for lossless.
-m maxerr : defines a maximum pixel error for JPEG LS coding
-h : optimize the Huffman tables
-a : use arithmetic coding instead of Huffman coding
available for all coding schemes (-p,-v,-l and default)
-bl : force encoding in the baseline process, default is extended sequential
-v : use progressive instead of sequential encoding
available for all coding schemes (-r,-a,-l and default)
-qv : use a simplified scan pattern for progressive that only
separates AC from DC bands and may improve the performance
-d : encode the DC band only (requires -p)
-y levels : hierarchical JPEG coding with the given number of decomposition
levels. If levels is zero, then a lossless coding mode for hierarchical is used in
which the second lossless scan encodes the DCT residuals of the first scan. For
that, -c is suggested for true lossless. If levels is one, then the lossy initial
scan is downscaled by a power of two.
-g gamma : define the exponent for the gamma for the LDR domain, or rather, for
mapping HDR to LDR. A suggested value is 2.4 for mapping scRGB to sRBG. This
option controls the base-nonlinearity that generates the HDR pre-cursor image from
the LDR image. It is also used in the absence of -ldr (i.e. no LDR image) to
tonemap the HDR input image. Use -g 0 to use an approximate inverse TMO as
base-nonlinearity, and for tonemapping with the Reinhard operator if the LDR image
is missing.
-gf file : define the inverse one-point L-nonlinearity on decoding from a file
this file contains one (ASCII encoded) digit per line, 256*2^h lines in total,
where h is the number of refinement bits. Each line contains an (integer) output
value the corresponding input is mapped to.
-z mcus : define the restart interval size, zero disables it
-n : indicate the image height by a DNL marker
-s WxH,... : define subsampling factors for all components
note that these are NOT MCU sizes Default is 1x1,1x1,1x1 (444 subsampling)
1x1,2x2,2x2 is the 420 subsampling often used
-sr WxH,...: define subsampling in the residual domain
-rs : encode the residual image in sequential (rather than the modified residual)
coding mode
-rv : encode the residual image in progressive coding mode
-ol : open loop encoding, residuals are based on original, not reconstructed
-dz : improved deadzone quantizer, may help to improve the R/D performance
-oz : optimize quantizer, may help to improve the R/D performance
-dr : include the optional de-ringing (Gibbs Phenomenon) filter on encoding
-qt n : define the quantization table. The following tables are currently defined:
n = 0 the example tables from Rec. ITU-T T.81 | ISO/IEC 10918-1 (default) n = 1 a
completely flat table that should be PSNR-optimal n = 2 a MS-SSIM optimized table n
= 3 the table suggested by ImageMagick n = 4 a HSV-PSNR optimized table n = 5 the
table from Klein, Silverstein and Carney:
Relevance of human vision to JPEG-DCT compression (1992)
n = 6 the table from Watson, Taylor, Borthwick:
DCTune perceptual optimization of compressed dental X-Rays (1997)
n = 7 the table from Ahumada, Watson, Peterson:
A visual detection model for DCT coefficient quantization (1993)
n = 8 the table from Peterson, Ahumada and Watson:
An improved detection model for DCT coefficient quantization (1993)
-qtf file : read the quantization steps from a file, 64*2 integers (luma & chroma)
-rqt n : defines the quantization table for the residual stream in the same way
-rqtf file : read the residual quantization steps from a file
-al file : specifies a one-component pgm/pfm file that contains an alpha component
or the code will write the alpha component to. This demo code DOES NOT implement
compositing of alpha and background
-am mode : specifes the mode of the alpha: 1 (regular) 2 (premultiplied) 3
(matte-removal)
-ab r,g,b : specifies the matte (background) color for mode 3 as RGB triple
-ar : enable residual coding for the alpha channel, required if the
alpha channel is larger than 8bpp
-ar12 : use a 12 bit residual for the alpha channel
-aR bits : set refinement bits in the alpha base codestream
-arR bits : set refinement bits in the residual alpha codestream
-aol : enable open loop coding for the alpha channel
-adz : enable the deadzone quantizer for the alpha channel
-aoz : enable the quantization optimization for the alpha channel
-adr : include the de-ringing filter for the alpha channel
-all : enable lossless DCT for alpha coding
-alo : disable the DCT in the residual alpha channel, quantize spatially.
-aq qu : specify a quality for the alpha base channel (usually the only one)
-aQ qu : specify a quality for the alpha extension layer
-aqt n : specify the quantization table for the alpha channel
-aqtf file : read the alpha quantization tables from a file
-arqt n : specify the quantization table for residual alpha
-arqtf file: read the residual alpha quantization tables from a file
-aquality q: specify a combined quality for both
-ra : enable arithmetic coding for residual image (*NOT SPECIFIED*)
-ls mode : encode in JPEG LS mode, where 0 is scan-interleaved,
1 is line interleaved and 2 is sample interleaved. NOTE THAT THIS IS NOT
CONFORMING TO REC. ITU-T T.81 | ISO/IEC 10918 BUT COMPLIANT TO REC. ITU-T T.87 |
ISO/IEC 14495-1 (JPEG-LS) WHICH IS A DIFFERENT STANDARD. Use -c to bypass the
YCbCr color transformation for true lossless, also use -c for decoding images
encoded by the UBC reference software as it does not write an indicator marker to
disable the transformation itself. Note that the UBC implementation will not able
to decode streams created by this software due to a limitation of the UBC code -
the streams are nevertheless fully conforming.
-cls : Use a JPEG LS part-2 conforming pseudo-RCT color transformation.
Note that this transformation is only CONFORMING TO REC. ITU-T T.870 | ISO/IEC
14495-2 AND NOT CONFORMING TO REC. ITU-T T.81 | ISO/IEC 10918-1. Works for
near-lossless JPEG LS DO NOT USE FOR LOSSY JPEG, it will also create artifacts.
EXAMPLES
Standard JPEG compression, with 444 (aka "no") subsampling:
$ jpeg -q <quality> infile.ppm outfile.jpg
Standard JPEG compression, with 422 subsampling:
$ jpeg -q <quality> -s 1x1,2x2,2x2 infile.ppm outfile.jpg
Intermediate dynamic range compression, i.e. compression of images of a bit-depth between
8 and 16 bits:
$ jpeg -r -q <base-quality> -Q <extension-quality> -h -r12 infile.ppm outfile.jpg
This type of encoding uses a technology known as "residual scans" which increase the bit-
depths in the spatial domain which is enabled by the -r command line switch. The -Q
parameter sets the quality of the residual image. To improve the precision in the
frequency domain, "refinement scans" can be used. The following encodes a 12-bit image
with four additional refinement scans, enabled by the "-R 4" parameter.
$ jpeg -q <quality> -R 4 -h infile.ppm outfile.jpg
Both technologies can be combined, and the precision of the residual scan can also be
enlarged by using residual refinement scans with the -rR option. The following command
line with use a 12-bit residual scan with four refinement scans:
$ jpeg -r -q <base-quality> -Q <extension-quality> -h -rR 4 infile.ppm outfile.jpg
High-dynamic range compression allows three different profiles of varying complexity and
performance. The profiles are denoted by "-profile <X>" where <X> is a,b or c. The
following encodes an HDR image in profile C:
$ jpeg -r -q <base-quality> -Q <extension-quality> -h -profile c -rR 4 infile.pfm
outfile.jpg
HDR images here have to be fed into the command line in "pfm" format. exr or hdr is not
supported as input format and requires conversion to pfm first. pfm is the floating-point
equivalent of ppm and encodes each pixel by three 32-bit floating point numbers.
Encoding in profiles a and b works likewise, though it is generally advisable to use "open
loop" rather than "closed loop" coding for these two profiles by additionally providing
the "-ol" parameter. This also works for profile C:
$ jpeg -ol -r -profile a -q <base-quality> -Q <extension-quality> -h infile.pfm out.jpg
similar for profile B.
What is common to profiles A and C is that you may optionally also specify the LDR image,
i.e. the image that a legacy JPEG decoder will show. By default, a simple tone mapping
algorithm ("global Reinhard") will be used to derive a suitable LDR image from the input
image:
$ jpeg -ldr infile.ppm -q <base-quality> -Q <extension-quality> -h -rR 4 infile.pfm
out.jpg
The profile is by default profile c, but it also works for profile a:
$ jpeg -ol profile a -ldr infile.ppm -q <base-quality> -Q <extension-quality> infile.pfm
out.jpg
It is in general advisable for profile c encoding to enable residual refinement scans,
profiles a or b do not require them.
The following options exist for lossless coding integer:
predictive Rec. ITU-T T.81 | ISO/IEC 10918-1 coding. Note, however, that not many
implementations are capable of decoding such stream, thus this is probably not a good
option for all-day purposes.
$ jpeg -p -c infile.ppm out.jpg
While the result is a valid Rec. ITU-T T.81 | ISO/IEC 10918-1 stream, most other
implementations will hick up and break, thus it is not advisable to use it.
A second option for lossless coding is residual coding within profile c:
$ jpeg -q <quality> -Q 100 -h -r infile.ppm out.jpg
This also works for floating point coding. Note that lossless coding is enabled by setting
the extension quality to 100.
$ jpeg -q <quality> -Q 100 -h -r infile.pfm out.jpg
However, this is only lossless for 16 bit input samples, i.e. there is a precision loss
due to down-converting the 32-bit input to 16 bit. If samples are out of the 601 gamut,
the problem also exists that clamping will happen. To avoid that, encode in the XYZ color
space (profile C only, currently):
$ jpeg -xyz -q <quality> -Q 100 -h -r infile.pfm out.jpg
A second option for lossless integer coding is to use a lossless 1-1 DCT process. This is
enabled with the -l command line option:
$ jpeg -l -q 100 -c infile.ppm out.jpg
Refinement scans can be used to increase the sample precision to up to 12 bits. The "-c"
command line option disables the lossy color transformation.
Additionally, this implementation also supports JPEG LS, which is outside of Rec. ITU-T
T.81 | ISO/IEC 10918-1 and ISO/IEC 18477. For that, use the command line option -ls:
$ jpeg -ls -c infile.ppm out.jpg
The "-c" command line switch is necessary to disable the color transformation as JPEG LS
typically encodes in RGB and not YCbCr space.
Optionally, you may specify the JPEG LS "near" parameter (maximum error) with the -m
command line switch:
$ jpeg -ls -m 2 -c infile.ppm out.jpg
JPEG LS also specifies a lossless color transformation that is enabled with -cls:
$ jpeg -ls -cls infile.ppm out.jpg
To encode images with an alpha channel, specify the source image that contains the alpha
channel with -al. The alpha channel is a one-component grey-scale image, either integer or
floating point. The quality of the alpha channel is specified with -aq, that of the
regular image with -q:
$ jpeg -al alpha.pgm -aq 80 -q 85 input.ppm output.jpg
Alpha channels can be larger than 8bpp or can be floating point. In both cases, residual
coding is required. To enable residual coding in the alpha channel, use the -ar command
line option. Similar to the regular image, where residual coding requires two parameters,
-q for the base quality and -Q for the extension quality, an alpha channel that uses
residual coding also requires a base and extension quality, the former is given by -aq,
the latter with -aQ:
$ jpeg -ar -al alphahigh.pgm -q 85 -Q 90 -aq 80 -aQ 90 input.ppm out.jpg
The alpha channel can be encoded without loss if desired. For that, enable residual coding
with -ar and specify an extension quality of 100:
$ jpeg -ar -al alphahigh.pgm -q 85 -Q 90 -aq 80 -aQ 100 input.ppm out.jpg
The alpha channel can use the same technology extensions as the image, namely refinement
scans in the base or extension image, or 12-bit residual images. The number of refinement
scans is selected with -aR and -arR for the base and residual image, a 12-bit residual
image is selected with -ar12.
--------------------------------------------------------------------------
Decoding is much simpler:
$ jpeg infile.jpg out.ppm
or, for floating point images:
$ jpeg infile.jpg out.pfm
If you want to decode a JPEG LS image, then you may want to tell the decoder explicitly to
disable the color transformation even though the corresponding marker signalling coding in
RGB space is typically missing for JPEG LS:
$ jpeg -c infile.jpg out.ppm
If an alpha channel is included in the image, the decoder does not reconstruct this
automatically, nor does it attempt to merge the alpha image into the file. Instead, it may
optionally be instructed to write the alpha channel into a separate 1-component (grey-
scale) file:
$ jpeg -al alpha.pgm infile.jpg outfile.ppm
The -al option for the decoder provides the target file for the alpha channel.
AUTHOR
This manual page was written by Mathieu Malaterre <malat@debian.org> for the Debian
GNU/Linux system (but may be used by others).