Provided by: keynav_0.20180421~git6505bd0d-3_amd64 bug

NAME

       keynav - keyboard navigation tool

SYNOPSIS

       keynav [optional-startup-commands]

DESCRIPTION

       keynav is a utility for generally operating your mouse with your keyboard.  The main usage
       is to divide the screen into sections, selecting them until you end up at the point where
       you want to move the mouse, or click, etc.

       You can pass any valid keynav commands to keynav from the command-line. Make sure you
       quote things properly.

       For example, to load another config file or two:

        keynav "loadconfig ~/myconfigs/keynavrc,loadconfig ~/myconfig/anotherkeynavrc"

       Another example: daemonize on startup:
        keynav daemonize

CONFIGURATION

       keynav is configured by default from a config file in your home directory "~/.keynavrc"

       The default configuration can be found in the "DEFAULT CONFIGURATION" section.

       '#' will delimit comments. The configuration consists mostly of binding keys to keynav
       commands. The following to commands must appear on lines by themselves, not as key
       bindings.

       daemonize
           This will make keynav background itself after parsing the config file and setting up
           keybindings. If there are errors during keybinding, then keynav will not background
           and will exit with failure.

       clear
           This wil clear all existing keybindings. This is useful if, for example, you do not
           want any of the default keybindings that come with keynav.

       The rest of the configuration has this format

        keybinding keynav-command[,keynav-command,...]

       You can have multiple commands for a single keybinding.

       The way to start keynav's navigation is to use the 'start' command.  Additionally, any
       keys with 'start' as a command will be grabbed as global hotkeys. For example, this
       configuration:

        ctrl+semicolon start
        space click 1

       This will make keynav grab the ctrl + semicolon keybinding globally, but it will not grab
       space. The space keybinding will only be active while keynav is active (after you press a
       key sequence that invokes start.

       In case of a keyboard layout where semicolon is just reachable by pressing Shift, the
       activation key combination actually might not be ctrl+shift+[other character], but just
       ctrl+[other character], e.g. ctrl+comma instead of ctrl+shift+comma on Swiss-German or
       German-German layouts.

       If you aren't sure what the name of your key is, you can run xev(1) and press each key you
       want to learn about while the xev window has focus. The output will include the keysym
       name (like Shift_L, or Return, etc)

       Moving on, here are all the keynav commands you can use:

   CUTS AND MOVES
       Movements are bounded by screen edges. See "SCREEN EDGES" for edge and multiple screen
       handling.

       cut-up [value]
           This will cut the keynav window upwards. We will shrink from the bottom upwards. The
           default cut value, if not specified, is 0.5

           See "CUT AND MOVE VALUES" for what this value means.

       cut-down [value]
           This will cut the keynav window downwards. We will shrink from the top down. The
           default cut value, if not specified, is 0.5

           See "CUT AND MOVE VALUES" for what this value means.

       cut-left [value]
           This will cut the keynav window leftwards. We will shrink from the right to the left.
           The default cut value, if not specified, is 0.5

           See "CUT AND MOVE VALUES" for what this value means.

       cut-right [value]
           This will cut the keynav window rightwards. We will shrink from the left to the right.
           The default cut value, if not specified, is 0.5

           See "CUT AND MOVE VALUES" for what this value means.

       move-up [value]
           This will move the window up. The default value, if not specified, is 1.

           See "CUT AND MOVE VALUES" for what this value means.

       move-down [value]
           This will move the window down. The default value, if not specified, is 1.

           See "CUT AND MOVE VALUES" for what this value means.

       move-left [value]
           This will move the window left. The default value, if not specified, is 1.

           See "CUT AND MOVE VALUES" for what this value means.

       move-right [value]
           This will move the window right. The default value, if not specified, is 1.

           See "CUT AND MOVE VALUES" for what this value means.

       cursorzoom width height
           This command centers the keynav window on the mouse position and sets the window size
           to the given width and height (in pixels).

       windowzoom
           This command makes the keynav window fit the current application window. This is
           useful if you have your windows in a tiled arrangement.

   GRID COMMANDS
       grid [COLUMNSxROWS]
           The default 'grid' is 2x2. If you want more grid cells you can choose any number of
           columns and rows.

       grid-nav [on OR off OR toggle]
           Grid navigation is off by default. When turned on, every grid cell will have a two-
           letter label. To select a single cell, you simply type the two letters. The 'toggle'
           value will toggle grid-nav.

       cell-select [value]
           Cell selection is similar to grid-nav, but less visual. You would bind keys to select
           specific cells. With cell-select, there are no labels.

           The value can be one of two formats. First, the COLUMNxROW syntax. 'cell-select 3x1'
           will select column 3, row 1. The second format is simply a number. The number
           represents the counting of the cell, starting at the top left and working right.

           A visual might help. With 'grid 3x3' the following is used with cell-select:

            +----------------------------------------------+
            |              |               |               |
            |     1x1      |      2x1      |      3x1      |
            |      1       |       2       |       3       |
            |              |               |               |
            |--------------+---------------+---------------|
            |              |               |               |
            |     1x2      |      2x2      |      3x2      |
            |      4       |       5       |       6       |
            |              |               |               |
            |--------------+---------------+---------------|
            |              |               |               |
            |     1x3      |      2x3      |      3x3      |
            |      7       |       8       |       9       |
            |              |               |               |
            |----------------------------------------------|

   MOUSE COMMANDS
       warp
           This command moves the mouse pointer to the center of the keynav window.

       click [button]
           This command will send a mouse click. It does not move the mouse, so the click will go
           wherever the mouse is positioned. The button values are this: 1 = left, 2 = middle, 3
           = right, 4 = wheel up, 5 = wheel down.

       doubleclick [button]
           Double clicks, but otherwise is the same as click.

       drag button [modifier-keys]
           Starts or ends dragging, depending on state (dragging or not). The button values are
           the same as for click. The modifier-keys value allows you to specify any keys to
           'hold' while dragging, such as alt or shift.

           Dragging sometimes doesn't work. I'm trying to make it more reliable. File a bug if
           you are interested in this feature working :)

   MISC COMMANDS
       record [file]
           Record actions for replay later. Very similar to vim's 'q' command. The first key you
           press after starting a new recording becomes the active key for that recording. You
           cannot record to keys that are already bound to other commands, but you can overwrite
           existing recordings. If you want to persist recordings across keynav processes (like
           system or keynav restarts, etc) you will want to specify a file, I use
           "~/.keynav_macros" but any path will do.

           For example, this config: 'q record'. Pressing 'q' then 'l' will start recording to
           the 'l' key assuming it's not already bound. Then, to stop recording, press 'q' again
           (the record key as configured). After that, to replay that recording, simply press
           playback and then 'l' while the keynav window is active.

       playback
           Replay a previously recorded sequence of keys. After invoking the command, keynav will
           wait for the key of a previously recorded session.

       sh command
           Run a command with /bin/sh -c <command>. This is slightly outside the scope of keynav,
           but executing arbitrary commands is very useful when combined with xdotool. For
           example, I use this to activate Google Chrome and focus the URL bar:

            g sh "xdotool search --name -- '- Google Chrome' windowactivate key --window 0 --clearmodifiers ctrl+l",end

       loadconfig path
           Load an additional config file. Paths like '~/foo/bar' are valid and the '~' will be
           replaced with your home directory (Value of $HOME in environment).

       start
           Start keynav. Any keys with this binding will operate as global bindings to activate
           keynav.

       end End keynav. This hides the keynav window and otherwise makes keynav inactive until the
           next 'start' command.

       history-back
           Go backwards in command history. All activity is tracked in history, so if you want to
           undo a movement, etc, simply use this command.

       quit
           Exit keynav. The process will shutdown.

       restart
           Restart keynav. Useful for reloading the configuration. SIGHUP and SIGUSR1 also invoke
           this command.

CUT AND MOVE VALUES

       The values for cuts and moves have two kinds values.

       Values in the range [0,1] are taken to mean a percentage of the window's width or height.
       Values > 1 are taken literally as pixel units.

       Some examples:

       cut-up 0.75
           This will cut and keep 75% of the window's height. That is, if the window is 1000
           pixels tall, then after this cut it will be 750 pixels tall.

       move-left 1
           The '1' here maeans 100% of the width. This will move the window to the left by the
           full width of the window.

       move-down 100
           The '100' here means 100 pixels. This will move the window down by 100 pixels.

SCREEN EDGES

       When moving the keynav window around, the window will not go outside of the screen
       boundaries. One exception is for multiple displays: a movement outside of the current
       screen can move the keynav window to the next screen if keynav things it's the right thing
       to do.

       If a move would take you beyond the screen borders, then the window will stop moving at
       the edge.

DEFAULT CONFIGURATION

        clear
        ctrl+semicolon start
        Escape end
        ctrl+bracketleft end
        q record ~/.keynav_macros
        shift+at playback
        a history-back
        h cut-left
        j cut-down
        k cut-up
        l cut-right
        shift+h move-left
        shift+j move-down
        shift+k move-up
        shift+l move-right
        space warp,click 1,end
        Return warp,click 1,end
        semicolon warp,end
        w warp
        t windowzoom
        c cursorzoom 300 300
        e end
        1 click 1
        2 click 2
        3 click 3
        ctrl+h cut-left
        ctrl+j cut-down
        ctrl+k cut-up
        ctrl+l cut-right
        y cut-left,cut-up
        u cut-right,cut-up
        b cut-left,cut-down
        n cut-right,cut-down
        shift+y move-left,move-up
        shift+u move-right,move-up
        shift+b move-left,move-down
        shift+n move-right,move-down
        ctrl+y cut-left,cut-up
        ctrl+u cut-right,cut-up
        ctrl+b cut-left,cut-down
        ctrl+n cut-right,cut-down

EXAMPLES

        # Make 'v' paste things:
        v sh "xdotool key shift+Insert",end

       See the author's keynavrc as an example, here:

       http://semicomplete.googlecode.com/svn/keynav/examples/keynavrc.jordan

SEE ALSO

       Related: xdotool(1)

       Project site: <http://www.semicomplete.com/projects/keynav>

       Google Code: <http://semicomplete.googlecode.com/>

CONTACT

       Please send questions and comments to keynav-users@googlegroups.com. File bugs and feature
       requests at the following URL:

       <http://code.google.com/p/semicomplete/issues/list>

       Alternately, if you really prefer email, feel free to file bugs by emailing the list. What
       works for you :)

AUTHOR

       keynav was written by Jordan Sissel.

                                            2021-01-17                                  KEYNAV(1)