Ubuntu Manpage: llvm-ar - LLVM archiver

NAME

       llvm-ar - LLVM archiver

SYNOPSIS

       llvm-ar [-]{dmpqrstx}[abcDilLNoOPsSTuUvV] [relpos] [count] archive [files…]

DESCRIPTION

The llvm-ar command is similar to the common Unix utility, ar. It archives several files,
such as objects and LLVM bitcode files into a single archive library that can be linked
into a program. However, the archive can contain any kind of file. By default, llvm-ar
generates a symbol table that makes linking faster because only the symbol table needs to
be consulted, not each individual file member of the archive.

The llvm-ar command can be used to read archive files in SVR4, GNU, BSD and Darwin format,
and write in the GNU, BSD, and Darwin style archive files. If an SVR4 format archive is
used with the r (replace), d (delete), m (move) or q (quick update) operations, the
archive will be reconstructed in the format defined by --format.

Here’s where llvm-ar departs from previous ar implementations:

The following option is not supported
[f] - truncate inserted filenames

The following options are ignored for compatibility
–plugin=<string> - load a plugin which adds support for other file formats

[l] - ignored in ar

Symbol Table
Since llvm-ar supports bitcode files, the symbol table it creates includes both native
and bitcode symbols.

Deterministic Archives
By default, llvm-ar always uses zero for timestamps and UIDs/GIDs to write archives in
a deterministic mode. This is equivalent to the D modifier being enabled by default. If
you wish to maintain compatibility with other ar implementations, you can pass the U
modifier to write actual timestamps and UIDs/GIDs.

Windows Paths
When on Windows llvm-ar treats the names of archived files in the same case sensitive
manner as the operating system. When on a non-Windows machine llvm-ar does not consider
character case.

OPTIONS

llvm-ar operations are compatible with other ar implementations. However, there are a few
modifiers (L) that are not found in other ar implementations. The options for llvm-ar
specify a single basic Operation to perform on the archive, a variety of Modifiers for
that Operation, the name of the archive file, and an optional list of file names. If the
files option is not specified, it generally means either “none” or “all” members,
depending on the operation. The Options, Operations and Modifiers are explained in the
sections below.

The minimal set of options is at least one operator and the name of the archive.

Operations
d [NT] Delete files from the archive. The N and T modifiers apply to this operation. The
files options specify which members should be removed from the archive. It is not
an error if a specified file does not appear in the archive. If no files are
specified, the archive is not modified.

m [abi]
Move files from one location in the archive to another. The a, b, and i modifiers
apply to this operation. The files will all be moved to the location given by the
modifiers. If no modifiers are used, the files will be moved to the end of the
archive. If no files are specified, the archive is not modified.

p [v] Print files to the standard output stream. If no files are specified, the entire
archive is printed. With the v modifier, llvm-ar also prints out the name of the
file being output. Printing binary files is ill-advised as they might confuse your
terminal settings. The p operation never modifies the archive.

q [LT] Quickly append files to the end of the archive without removing duplicates. If no
files are specified, the archive is not modified. The behavior when appending one
archive to another depends upon whether the L and T modifiers are used:

• Appending a regular archive to a regular archive will append the archive file. If
the L modifier is specified the members will be appended instead.

• Appending a regular archive to a thin archive requires the T modifier and will
append the archive file. The L modifier is not supported.

• Appending a thin archive to a regular archive will append the archive file. If
the L modifier is specified the members will be appended instead.

• Appending a thin archive to a thin archive will always quick append its members.

r [abTu]
Replace existing files or insert them at the end of the archive if they do not
exist. The a, b, T and u modifiers apply to this operation. If no files are
specified, the archive is not modified.

t[v] .. option:: t [vO]
Print the table of contents. Without any modifiers, this operation just prints the
names of the members to the standard output stream. With the v modifier, llvm-ar also
prints out the file type (B=bitcode, S=symbol table, blank=regular file), the
permission mode, the owner and group, are ignored when extracting files and set to
placeholder values when adding size, and the date. With the O modifier, display member
offsets. If any files are specified, the listing is only for those files. If no files
are specified, the table of contents for the whole archive is printed.

V A synonym for the --version option.

x [oP] Extract archive members back to files. The o modifier applies to this operation.
This operation retrieves the indicated files from the archive and writes them back
to the operating system’s file system. If no files are specified, the entire
archive is extracted.

Modifiers (operation specific)
The modifiers below are specific to certain operations. See the Operations section to
determine which modifiers are applicable to which operations.

a When inserting or moving member files, this option specifies the destination of the
new files as being after the relpos member. If relpos is not found, the files are
placed at the end of the archive. relpos cannot be consumed without either a, b or
i.

b When inserting or moving member files, this option specifies the destination of the
new files as being before the relpos member. If relpos is not found, the files are
placed at the end of the archive. relpos cannot be consumed without either a, b or
i. This modifier is identical to the i modifier.

i A synonym for the b option.

L When quick appending an archive, instead quick append its members. This is a
feature for llvm-ar that is not found in gnu-ar.

N When extracting or deleting a member that shares its name with another member, the
count parameter allows you to supply a positive whole number that selects the
instance of the given name, with “1” indicating the first instance. If N is not
specified the first member of that name will be selected. If count is not supplied,
the operation fails.*count* cannot be

o When extracting files, use the modification times of any files as they appear in
the archive. By default files extracted from the archive use the time of
extraction.

O Display member offsets inside the archive.

T When creating or modifying an archive, this option specifies that the archive will
be thin. By default, archives are not created as thin archives and when modifying a
thin archive, it will be converted to a regular archive.

v When printing files or the archive table of contents, this modifier instructs
llvm-ar to include additional information in the output.

Modifiers (generic)
The modifiers below may be applied to any operation.

c For the r (replace)and q (quick update) operations, llvm-ar will always create the
archive if it doesn’t exist. Normally, llvm-ar will print a warning message
indicating that the archive is being created. Using this modifier turns off that
warning.

D Use zero for timestamps and UIDs/GIDs. This is set by default.

P Use full paths when matching member names rather than just the file name. This can
be useful when manipulating an archive generated by another archiver, as some allow
paths as member names. This is the default behavior for thin archives.

s This modifier requests that an archive index (or symbol table) be added to the
archive, as if using ranlib. The symbol table will contain all the externally
visible functions and global variables defined by all the bitcode files in the
archive. By default llvm-ar generates symbol tables in archives. This can also be
used as an operation.

S This modifier is the opposite of the s modifier. It instructs llvm-ar to not build
the symbol table. If both s and S are used, the last modifier to occur in the
options will prevail.

u Only update archive members with files that have more recent timestamps.

U Use actual timestamps and UIDs/GIDs.

Other
--format=<type>
This option allows for default, gnu, darwin or bsd <type> to be selected. When
creating an archive, <type> will default to that of the host machine.

-h, --help
Print a summary of command-line options and their meanings.

-M This option allows for MRI scripts to be read through the standard input stream. No
other options are compatible with this option.

--rsp-quoting=<type>

This option selects the quoting style ``<type>`` for response files, either

``posix`` or ``windows``. The default when on Windows is ``windows``, otherwise the

default is ``posix``.

--version
Display the version of the llvm-ar executable.

@<FILE>
Read command-line options and commands from response file <FILE>.

MRI SCRIPTS

llvm-ar understands a subset of the MRI scripting interface commonly supported by
archivers following in the ar tradition. An MRI script contains a sequence of commands to
be executed by the archiver. The -M option allows for an MRI script to be passed to
llvm-ar through the standard input stream.

Note that llvm-ar has known limitations regarding the use of MRI scripts:

• Each script can only create one archive.

• Existing archives can not be modified.

MRI Script Commands
Each command begins with the command’s name and must appear on its own line. Some
commands have arguments, which must be separated from the name by whitespace. An MRI
script should begin with either a CREATE or CREATETHIN command and will typically end with
a SAVE command. Any text after either ‘*’ or ‘;’ is treated as a comment.

CREATE archive
Begin creation of a regular archive with the specified name. Subsequent commands
act upon this archive.

CREATETHIN archive
Begin creation of a thin archive with the specified name. Subsequent commands act
upon this archive.

ADDLIB archive
Append the contents of archive to the current archive.

ADDMOD <file>
Append <file> to the current archive.

DELETE <file>
Delete the member of the current archive whose file name, excluding directory
components, matches <file>.

SAVE Write the current archive to the path specified in the previous CREATE/CREATETHIN
command.

END Ends the MRI script (optional).

EXIT STATUS

       If  llvm-ar  succeeds,  it  will exit with 0.  Otherwise, if an error occurs, it will exit
       with a non-zero value.

AUTHOR

       Maintained by the LLVM Team (https://llvm.org/).

COPYRIGHT

       2003-2022, LLVM Project