Provided by: medusa_2.2-7build1_amd64 bug

NAME

       MEDUSA - Parallel Network Login Auditor

SYNOPSIS

       medusa  [-h  host|-H file] [-u username|-U file] [-p password|-P file] [-C file] -M module
       [OPTIONS]

DESCRIPTION

       Medusa is intended to be a speedy, massively parallel, modular, login  brute-forcer.   The
       goal  is  to  support  as many services which allow remote authentication as possible. The
       author considers following items to some of the key features of this application:

       *Thread-based parallel testing. Brute-force testing  can  be  performed  against  multiple
       hosts, users or passwords concurrently.

       *Flexible  user  input.  Target  information  (host/user/password)  can  be specified in a
       variety of ways. For example, each item can be either a single entry or a file  containing
       multiple  entries. Additionally, a combination file format allows the user to refine their
       target listing.

       *Modular design. Each service module exists as an independent .mod file. This  means  that
       no  modifications  are  necessary to the core application in order to extend the supported
       list of services for brute-forcing.

OPTIONS

       -h [TARGET]
              Target hostname or IP address.

       -H [FILE]
              Reads target specifications from the file specified rather than  from  the  command
              line.  The file should contain a list separated by newlines.

       -u [TARGET]
              Target username.

       -U [FILE]
              Reads  target  usernames from the file specified rather than from the command line.
              The file should contain a list separated by newlines.

       -p [TARGET]
              Target password.

       -P [FILE]
              Reads target passwords from the file specified rather than from the  command  line.
              The file should contain a list separated by newlines.

       -C [FILE]
              File containing combo entries. Combo files are colon separated and in the following
              format: host:user:password. If  any  of  the  three  fields  are  left  empty,  the
              respective  information  should be provided either as a single global value or as a
              list in a file.

              The following combinations are possible in the  combo  file:  1.)  foo:bar:fud  2.)
              foo:bar: 3.) foo:: 4.) :bar:fud 5.) :bar: 6.) ::fud 7.) foo::fud

              Medusa  also supports using PwDump files as a combo file. The format of these files
              should be user:id:lm:ntlm:::. We look for ':::' at the end of  the  first  line  to
              determine if the file contains PwDump output.

       -O [FILE]
              File  to  append log information to. Medusa will log all accounts credentials found
              to be valid or cause an unknown error. It will also log the start and stop times of
              an audit, along with the calling parameters.

       -e [n/s/ns]
              Additional  password  checks  ([n]  No  Password, [s] Password = Username). If both
              options are being used, they should be specified together  ("-e  ns").  If  only  a
              single option is being called use either "-e n" or "-e s".

       -M [TEXT]
              Name of the module to execute (without the .mod extension).

       -m [TEXT]
              Parameter to pass to the module. This can be passed multiple times with a different
              parameter each time and they will all be sent to the module  (i.e.   -m  Param1  -m
              Param2, etc.)

       -d     Dump all known modules.

       -n [NUM]
              Use for non-default TCP port number.

       -s     Enable SSL.

       -g [NUM]
              Give up after trying to connect for NUM seconds (default 3).

       -r [NUM]
              Sleep NUM seconds between retry attempts (default 3).

       -R [NUM]
              Attempt NUM retries before giving up. The total number of attempts will be NUM + 1.

       -c [NUM]
              Set  the  number  of  usec that are waited during a test of the established network
              socket. Some services (e.g. FTP, IMAP, POP3, and SMTP) may be  configured  to  drop
              connections after an arbitrary number of failed logon attempts. We try to reuse the
              established connection  to  send  authentication  attempts  until  this  disconnect
              occurs,  at  which  point  the  connection is reestablished. To accomplish this, we
              check the socket to see if it's still alive  before  authenticating  within  select
              modules. The default is perform a 1 usec check. It may be necessary to specify much
              larger values. For example, a 1000 usec was needed against our test vsftp server to
              avoid issues with its built-in anti-bruteforce mechanisms.

       -t [NUM]
              Total number of logins to be tested concurrently. It should be noted that roughly t
              x T threads could be running at any one time. 381 appears to be  the  limit  on  my
              fairly boring Gentoo Linux host.

       -T [NUM]
              Total number of hosts to be tested concurrently.

       -L     Parallelize  logins  using  one  username per thread. The default is to process the
              entire username before proceeding.

       -f     Stop scanning host after first valid username/password found.

       -F     Stop audit after first valid username/password found on any host.

       -b     Suppress startup banner

       -q     Display module's usage information. This should be used  in  conjunction  with  the
              "-M" option. For example, "medusa -M smbnt -q".

       -v [NUM]
              Verbose  level [0 - 6 (more)]. All messages at or below the specified level will be
              displayed. The default level is 5.

              The following is the breakdown of the verbose  levels:  0)    EXIT  APPLICATION  1)
              MESSAGE  WITHOUT  TAG  2)    LOG  MESSAGE  WITHOUT  TAG  3)    IMPORTANT MESSAGE 4)
              ACCOUNT FOUND 5)   ACCOUNT CHECK 6)   GENERAL MESSAGE

       -w [NUM]
              Error debug level [0 - 10 (more)]. All messages at or  below  the  specified  level
              will be displayed. The default level is 5.

              The  following  is  the  breakdown  of  the  error levels: 0)   FATAL 1)   ALERT 2)
              CRITICAL 3)   ERROR 4)   WARNING 5)   NOTICE 6)   INFO  7)    DEBUG  8)    DEBUG  -
              AUDIT 9)   DEBUG - SERVER 10)  DEBUG - MODULE

       -V     Display version

       -Z [TEXT]
              Allows  basic  resuming  of a previous scan. The supplied parameter describes which
              hosts were completed, which were partially tested and which had not  been  started.
              When  Medusa  receives a SIGINT, it will calculate and display a "resume map". This
              map can then be supplied to the next run. For example, "medusa [OPTIONS  PREVIOUSLY
              USED]  -Z  h6u1u2h8.". In this particular example, hosts 1-5 were completed, host 6
              was partially done (user 1 was partially completed and user 2 and  beyond  had  not
              been  started),  host  7  was completed and host 8 and beyond had not been started.
              Medusa will parse this map and skip hosts and users accordingly. It should be noted
              that only host and user-level, not password-level, resuming is supported. If a user
              had been previously started, but was not completed, it  will  be  tested  from  the
              start of its respective password list.

AUTHOR

       JoMo-Kun <jmk@foofus.net> fizzgig <fizzgig@foofus.net>

BUGS

       Found a bug? Feel free to send in a patch.

                                                                                        MEDUSA(1)