Provided by: openfortivpn_1.17.3-1_amd64 
NAME
openfortivpn - Client for PPP+SSL VPN tunnel services
SYNOPSIS
openfortivpn [<host>[:<port>]] [-u <user>] [-p <pass>] [--pinentry=<name>] [--otp=<otp>]
[--otp-prompt=<prompt>] [--otp-delay=<delay>] [--no-ftm-push] [--realm=<realm>]
[--ifname=<interface>] [--set-routes=<bool>] [--no-routes] [--set-dns=<bool>] [--no-dns]
[--half-internet-routes=<bool>] [--ca-file=<file>] [--user-cert=<file>] [--user-
cert=pkcs11:] [--user-key=<file>] [--use-syslog] [--trusted-cert=<digest>]
[--insecure-ssl] [--cipher-list=<ciphers>] [--min-tls=<version>] [--seclevel-1]
[--pppd-use-peerdns=<bool>] [--pppd-no-peerdns] [--pppd-log=<file>] [--pppd-plugin=<file>]
[--pppd-ipparam=<string>] [--pppd-ifname=<string>] [--pppd-call=<name>]
[--ppp-system=<string>] [--use-resolvconf=<bool>] [--persistent=<interval>] [-c <file>]
[-v|-q]
openfortivpn --help
openfortivpn --version
DESCRIPTION
openfortivpn connects to a VPN by setting up a tunnel to the gateway at <host>:<port>.
OPTIONS
--help Show the help message and exit.
--version
Show version and exit.
-c <file>, --config=<file>
Specify a custom configuration file (default: /etc/openfortivpn/config).
-u <user>, --username=<user>
VPN account username.
-p <pass>, --password=<pass>
VPN account password in plain text. For a secure alternative, use pinentry or let
openfortivpn prompt for the password.
--pinentry=<name>
The pinentry program to use. Allows supplying the password in a secure manner. For
example: pinentry-gnome3 on Linux, or pinentry-mac on macOS.
-o <otp>, --otp=<otp>
One-Time-Password.
--otp-prompt=<prompt>
Search for the OTP password prompt starting with the string <prompt>.
--otp-delay=<delay>
Set the amount of time to wait before sending the One-Time-Password. The delay
time must be specified in seconds, where 0 means no wait (this is the default).
--no-ftm-push
Do not use FTM push if the server provides the option. The server may be
configured to allow two factor authentication through a push notification to the
mobile application. If this option is provided, authentication based on OTP will be
used instead.
--realm=<realm>
Connect to the specified authentication realm. Defaults to empty, which is usually
what you want.
--ifname=<interface>
Bind the connection to the specified network interface.
--set-routes=<bool>, --no-routes
Set if openfortivpn should try to configure IP routes through the VPN when tunnel
is up. If used multiple times, the last one takes priority.
--no-routes is the same as --set-routes=0.
--half-internet-routes=<bool>
Set if openfortivpn should add two 0.0.0.0/1 and 128.0.0.0/1 routes with higher
priority instead of replacing the default route.
--set-dns=<bool>, --no-dns
Set if openfortivpn should add DNS name servers in /etc/resolv.conf when tunnel is
up. Also a dns-suffix may be received from the peer and added to /etc/resolv.conf
in the turn of adding the name servers. resolvconf is instructed to do the update
of the resolv.conf file if it is installed and --use-resolvconf is activated,
otherwise openfortivpn prepends its changes to the existing content of the
resolv.conf file. Note that there may be other mechanisms to update
/etc/resolv.conf, e.g., --pppd-use-peerdns in conjunction with an ip-up-script,
which may require that openfortivpn is called with --no-dns. --no-dns is the same
as --set-dns=0.
--use-resolvconf=<bool>
Set if openfortivpn should use resolvconf to add DNS name servers in
/etc/resolv.conf. If it is set to false, the builtin fallback mechanism is used
even if resolvconf is available.
--ca-file=<file>
Use specified PEM-encoded certificate bundle instead of system-wide store to verify
the gateway certificate.
--user-cert=<file>
Use specified PEM-encoded certificate if the server requires authentication with a
certificate.
--user-cert=pkcs11:
Use at least the string pkcs11: for using a smartcard. It takes the full or a
partial PKCS11-URI (p11tool --list-token-urls)
--user-cert = pkcs11:
--user-cert = pkcs11:token=someuser
--user-cert =
pkcs11:model=PKCS%2315%20emulated;manufacturer=piv_II;serial=012345678;token=someuser
This feature requires the OpenSSL PKCS engine!
--user-key=<file>
Use specified PEM-encoded key if the server requires authentication with a
certificate.
--pem-passphrase=<pass>
Pass phrase for the PEM-encoded key.
--use-syslog
Log to syslog instead of terminal.
--trusted-cert=<digest>
Trust a given gateway. If classical SSL certificate validation fails, the gateway
certificate will be matched against this value. <digest> is the X509 certificate's
sha256 sum. The certificate has to be encoded in DER form. This option can be used
multiple times to trust several certificates.
--insecure-ssl
Do not disable insecure SSL protocols/ciphers. If your server requires a specific
cipher, consider using --cipher-list instead.
--cipher-list=<ciphers>
OpenSSL ciphers to use. If default does not work, you can try alternatives such as
HIGH:!MD5:!RC4 or as suggested by the Cipher: line in the output of openssl(1)
(e.g. AES256-GCM-SHA384):
$ openssl s_client -connect <host:port>
(default: HIGH:!aNULL:!kRSA:!PSK:!SRP:!MD5:!RC4)
Applies to TLS v1.2 or lower only, not to be used with TLS v1.3 ciphers.
--min-tls=<version>
Use minimum TLS version instead of system default. Valid values are 1.0, 1.1, 1.2,
1.3.
--seclevel-1
If --cipher-list is not specified, add @SECLEVEL=1 to the list of ciphers. This
lowers limits on dh key.
Applies to TLS v1.2 or lower only.
--use-peer-dns=<bool>, --pppd-no-peerdns
Whether to ask peer ppp server for DNS server addresses and let pppd rewrite
/etc/resolv.conf. There is no mechanism to tell the dns-suffix to pppd. If the DNS
server addresses are requested, also --set-dns=1 may race with the mechanisms in
pppd.
--pppd-no-peerdns is the same as --pppd-use-peerdns=0.
--pppd-log=<file>
Set pppd in debug mode and save its logs into <file>.
--pppd-plugin=<file>
Use specified pppd plugin instead of configuring the resolver and routes directly.
--pppd-ipparam=<string>
Provides an extra parameter to the ip-up, ip-pre-up and ip-down scripts. See man
pppd(8) for further details
--pppd-ifname=<string>
Set the ppp interface name. Only if supported by pppd. Patched versions of pppd
implement this option but may not be available on your platform.
--pppd-call=<name>
Drop usual arguments from pppd command line and add `call <name>' instead. This
can be useful on Debian and Ubuntu, where unprivileged users in group `dip' can
invoke `pppd call <name>' to make pppd read and apply options from
/etc/ppp/peers/<name> (including privileged ones).
--ppp-system=<string>
Only available if compiled for ppp user space client (e.g. on FreeBSD). Connect to
the specified system as defined in /etc/ppp/ppp.conf
--persistent=<interval>
Run the VPN persistently in an endless loop and try to reconnect forever. The
reconnect interval may be specified in seconds, where 0 means no reconnect is done
(this is the default).
-v Increase verbosity. Can be used multiple times to be even more verbose.
-q Decrease verbosity. Can be used multiple times to be even less verbose.
ENVIRONMENT and proxy support
openfortivpn can be run behind an HTTP proxy that supports the HTTP connect command. It
checks if one of the environment variables https_proxy HTTPS_PROXY all_proxy ALL_PROXY is
set which are supposed to contain a string of the format
http://[host]:[port]
where [host] is the ip or the fully qualified host name of the proxy server [port] is the
TCP port number where the proxy is listening for incoming connections. If one of these
variables is defined, openfortivpn tries to first establish a TCP connection to this proxy
(plain HTTP, not encrypted), and then makes a request to connect to the VPN host as given
on the command line or in the configuration file. The proxy is supposed to forward any
subsequent packets transparently to the VPN host, so that the TLS layer of the connection
effectively is established between the client and the VPN host, and the proxy just acts as
a forwarding instance on the lower level of the TCP connection.
The following environment variables are set by openfortivpn and pppd(8) or its scripts can
obtain information this way:
VPN_GATEWAY the ip of the gateway host
and for each route three variables are set up, where an integer number is appended to the
variable names, denoting the number of the current route:
VPN_ROUTE_DEST_... the destination network of the route
VPN_ROUTE_MASK_... the network mask for this route
VPN_ROUTE_GATEWAY_... the gateway for the current route entry
If not compiled for pppd the pppd options and features that rely on them are not
available. On FreeBSD --ppp-system is available instead.
CONFIGURATION
Options can be taken from a configuration file. Options passed in the command line will
override those from the configuration file, though. The default configuration file is
/etc/openfortivpn/config, but this can be set using the -c option. An empty template for
the configuration file is installed to /usr/share/openfortivpn/config.template
A configuration file looks like:
# this is a comment
host = vpn-gateway
port = 443
username = foo
# Password in plain text.
# For a secure alternative, use pinentry or let openfortivpn prompt for the
password.
# password = bar
# The pinentry program to use. Allows supplying the password in a secure manner.
# pinentry = pinentry-mac
# realm = some-realm
# useful for a gui that passes a configuration file to openfortivpn
# otp = 123456
# otp-delay = 0
# otp-prompt = Please
# This would disable FTM push notification support, and use OTP instead
# no-ftm-push = 1
user-cert = /etc/openfortivpn/user-cert.pem
# user-cert = pkcs1: # use smartcard as client certificate
user-key = /etc/openfortivpn/user-key.pem
pem-passphrase = baz
# the sha256 digest of the trusted host certs obtained by
# openssl dgst -sha256 server-cert.crt:
trusted-cert = certificatedigest4daa8c5fe6c...
trusted-cert = othercertificatedigest6631bf...
# This would specify a ca bundle instead of system-wide store
# ca-file = /etc/openfortivpn/ca-bundle.pem
set-dns = 0
use-resolvconf = 1
set-routes = 1
half-internet-routes = 0
pppd-use-peerdns = 1
# alternatively, use a specific pppd plugin instead
# pppd-plugin = /usr/lib/pppd/default/some-plugin.so
# for debugging pppd write logs here
# pppd-log = /var/log/pppd.log
# pass ppp interface name to pppd (if supported by a patched pppd)
# pppd-ifname = ppp1
# pass an ipparam string to pppd, e.g. the device name (a similar use case)
# pppd-ipparam = 'device=$DEVICE'
# instruct pppd to call a script instead of passing arguments (if pppd supports it)
# pppd-call = script
# use-syslog = 0
insecure-ssl = 0
cipher-list = HIGH:!aNULL:!kRSA:!PSK:!SRP:!MD5:!RC4
persistent = 0
seclevel-1 = 0
SEE ALSO
The openfortivpn home page (https://github.com/adrienverge/openfortivpn) provides a short
introduction in the README file and additional information under the Wiki tab.
May 4, 2020 OPENFORTIVPN(1)