Ubuntu Manpage: openssl-genpkey - generate a private key

Provided by: openssl_3.0.5-2ubuntu1_amd64

NAME

       openssl-genpkey - generate a private key

SYNOPSIS

       openssl genpkey [-help] [-out filename] [-outform DER|PEM] [-quiet] [-pass arg] [-cipher]
       [-paramfile file] [-algorithm alg] [-pkeyopt opt:value] [-genparam] [-text] [-engine id]
       [-provider name] [-provider-path path] [-propquery propq] [-config configfile]

DESCRIPTION

       This command generates a private key.

OPTIONS

       -help
           Print out a usage message.

       -out filename
           Output the key to the specified file. If this argument is not specified then standard
           output is used.

       -outform DER|PEM
           The output format, except when -genparam is given; the default is PEM.  See
           openssl-format-options(1) for details.

           When -genparam is given, -outform is ignored.

       -quiet
           Do not output "status dots" while generating keys.

       -pass arg
           The output file password source. For more information about the format of arg see
           openssl-passphrase-options(1).

       -cipher
           This option encrypts the private key with the supplied cipher. Any algorithm name
           accepted by EVP_get_cipherbyname() is acceptable such as des3.

       -algorithm alg
           Public key algorithm to use such as RSA, DSA, DH or DHX. If used this option must
           precede any -pkeyopt options. The options -paramfile and -algorithm are mutually
           exclusive. Engines may add algorithms in addition to the standard built-in ones.

           Valid built-in algorithm names for private key generation are RSA, RSA-PSS, EC,
           X25519, X448, ED25519 and ED448.

           Valid built-in algorithm names for parameter generation (see the -genparam option) are
           DH, DSA and EC.

           Note that the algorithm name X9.42 DH may be used as a synonym for DHX keys and PKCS#3
           refers to DH Keys. Some options are not shared between DH and DHX keys.

       -pkeyopt opt:value
           Set the public key algorithm option opt to value. The precise set of options supported
           depends on the public key algorithm used and its implementation. See "KEY GENERATION
           OPTIONS" and "PARAMETER GENERATION OPTIONS" below for more details.

       -genparam
           Generate a set of parameters instead of a private key. If used this option must
           precede any -algorithm, -paramfile or -pkeyopt options.

       -paramfile filename
           Some public key algorithms generate a private key based on a set of parameters.  They
           can be supplied using this option. If this option is used the public key algorithm
           used is determined by the parameters. If used this option must precede any -pkeyopt
           options. The options -paramfile and -algorithm are mutually exclusive.

       -text
           Print an (unencrypted) text representation of private and public keys and parameters
           along with the PEM or DER structure.

       -engine id
           See "Engine Options" in openssl(1).  This option is deprecated.

       -provider name
       -provider-path path
       -propquery propq
           See "Provider Options" in openssl(1), provider(7), and property(7).

       -config configfile
           See "Configuration Option" in openssl(1).

KEY GENERATION OPTIONS

The options supported by each algorithm and indeed each implementation of an algorithm can
vary. The options for the OpenSSL implementations are detailed below. There are no key
generation options defined for the X25519, X448, ED25519 or ED448 algorithms.

RSA Key Generation Options
rsa_keygen_bits:numbits
The number of bits in the generated key. If not specified 2048 is used.

rsa_keygen_primes:numprimes
The number of primes in the generated key. If not specified 2 is used.

rsa_keygen_pubexp:value
The RSA public exponent value. This can be a large decimal or hexadecimal value if
preceded by "0x". Default value is 65537.

RSA-PSS Key Generation Options
Note: by default an RSA-PSS key has no parameter restrictions.

rsa_keygen_bits:numbits, rsa_keygen_primes:numprimes, rsa_keygen_pubexp:value
These options have the same meaning as the RSA algorithm.

rsa_pss_keygen_md:digest
If set the key is restricted and can only use digest for signing.

rsa_pss_keygen_mgf1_md:digest
If set the key is restricted and can only use digest as it's MGF1 parameter.

rsa_pss_keygen_saltlen:len
If set the key is restricted and len specifies the minimum salt length.

EC Key Generation Options
The EC key generation options can also be used for parameter generation.

ec_paramgen_curve:curve
The EC curve to use. OpenSSL supports NIST curve names such as "P-256".

ec_param_enc:encoding
The encoding to use for parameters. The encoding parameter must be either named_curve
or explicit. The default value is named_curve.

DH Key Generation Options
group:name
The paramfile option is not required if a named group is used here. See the "DH
Parameter Generation Options" section below.

PARAMETER GENERATION OPTIONS

The options supported by each algorithm and indeed each implementation of an algorithm can
vary. The options for the OpenSSL implementations are detailed below.

DSA Parameter Generation Options
dsa_paramgen_bits:numbits
The number of bits in the generated prime. If not specified 2048 is used.

dsa_paramgen_q_bits:numbits
qbits:numbits
The number of bits in the q parameter. Must be one of 160, 224 or 256. If not
specified 224 is used.

dsa_paramgen_md:digest
digest:digest
The digest to use during parameter generation. Must be one of sha1, sha224 or sha256.
If set, then the number of bits in q will match the output size of the specified
digest and the dsa_paramgen_q_bits parameter will be ignored. If not set, then a
digest will be used that gives an output matching the number of bits in q, i.e. sha1
if q length is 160, sha224 if it 224 or sha256 if it is 256.

properties:query
The digest property query string to use when fetching a digest from a provider.

type:type
The type of generation to use. Set this to 1 to use legacy FIPS186-2 parameter
generation. The default of 0 uses FIPS186-4 parameter generation.

gindex:index
The index to use for canonical generation and verification of the generator g. Set
this to a positive value ranging from 0..255 to use this mode. Larger values will only
use the bottom byte. This index must then be reused during key validation to verify
the value of g. If this value is not set then g is not verifiable. The default value
is -1.

hexseed:seed
The seed seed data to use instead of generating a random seed internally. This should
be used for testing purposes only. This will either produced fixed values for the
generated parameters OR it will fail if the seed did not generate valid primes.

DH Parameter Generation Options
For most use cases it is recommended to use the group option rather than the type options.
Note that the group option is not used by default if no parameter generation options are
specified.

group:name
dh_param:name
Use a named DH group to select constant values for the DH parameters. All other
options will be ignored if this value is set.

Valid values that are associated with the algorithm of "DH" are: "ffdhe2048",
"ffdhe3072", "ffdhe4096", "ffdhe6144", "ffdhe8192", "modp_1536", "modp_2048",
"modp_3072", "modp_4096", "modp_6144", "modp_8192".

Valid values that are associated with the algorithm of "DHX" are the RFC5114 names
"dh_1024_160", "dh_2048_224", "dh_2048_256".

dh_rfc5114:num
If this option is set, then the appropriate RFC5114 parameters are used instead of
generating new parameters. The value num can be one of 1, 2 or 3 that are equivalant
to using the option group with one of "dh_1024_160", "dh_2048_224" or "dh_2048_256".
All other options will be ignored if this value is set.

pbits:numbits
dh_paramgen_prime_len:numbits
The number of bits in the prime parameter p. The default is 2048.

qbits:numbits
dh_paramgen_subprime_len:numbits
The number of bits in the sub prime parameter q. The default is 224. Only relevant if
used in conjunction with the dh_paramgen_type option to generate DHX parameters.

safeprime-generator:value
dh_paramgen_generator:value
The value to use for the generator g. The default is 2. The algorithm option must be
"DH" for this parameter to be used.

type:string
The type name of DH parameters to generate. Valid values are:

"generator"
Use a safe prime generator with the option safeprime_generator The algorithm
option must be "DH".

"fips186_4"
FIPS186-4 parameter generation. The algorithm option must be "DHX".

"fips186_2"
FIPS186-4 parameter generation. The algorithm option must be "DHX".

"group"
Can be used with the option pbits to select one of "ffdhe2048", "ffdhe3072",
"ffdhe4096", "ffdhe6144" or "ffdhe8192". The algorithm option must be "DH".

"default"
Selects a default type based on the algorithm. This is used by the OpenSSL default
provider to set the type for backwards compatability. If algorithm is "DH" then
"generator" is used. If algorithm is "DHX" then "fips186_2" is used.

dh_paramgen_type:value
The type of DH parameters to generate. Valid values are 0, 1, 2 or 3 which correspond
to setting the option type to "generator", "fips186_2", "fips186_4" or "group".

digest:digest
The digest to use during parameter generation. Must be one of sha1, sha224 or sha256.
If set, then the number of bits in qbits will match the output size of the specified
digest and the qbits parameter will be ignored. If not set, then a digest will be used
that gives an output matching the number of bits in q, i.e. sha1 if q length is 160,
sha224 if it is 224 or sha256 if it is 256. This is only used by "fips186_4" and
"fips186_2" key generation.

properties:query
The digest property query string to use when fetching a digest from a provider. This
is only used by "fips186_4" and "fips186_2" key generation.

EC Parameter Generation Options
The EC parameter generation options are the same as for key generation. See "EC Key
Generation Options" above.

NOTES

       The use of the genpkey program is encouraged over the algorithm specific utilities because
       additional algorithm options and ENGINE provided algorithms can be used.

EXAMPLES

       Generate an RSA private key using default parameters:

        openssl genpkey -algorithm RSA -out key.pem

       Encrypt output private key using 128 bit AES and the passphrase "hello":

        openssl genpkey -algorithm RSA -out key.pem -aes-128-cbc -pass pass:hello

       Generate a 2048 bit RSA key using 3 as the public exponent:

        openssl genpkey -algorithm RSA -out key.pem \
            -pkeyopt rsa_keygen_bits:2048 -pkeyopt rsa_keygen_pubexp:3

       Generate 2048 bit DSA parameters that can be validated: The output values for gindex and
       seed are required for key validation purposes and are not saved to the output pem file).

        openssl genpkey -genparam -algorithm DSA -out dsap.pem -pkeyopt pbits:2048 \
            -pkeyopt qbits:224 -pkeyopt digest:SHA256 -pkeyopt gindex:1 -text

       Generate DSA key from parameters:

        openssl genpkey -paramfile dsap.pem -out dsakey.pem

       Generate 4096 bit DH Key using safe prime group ffdhe4096:

        openssl genpkey -algorithm DH -out dhkey.pem -pkeyopt group:ffdhe4096

       Generate 2048 bit X9.42 DH key with 256 bit subgroup using RFC5114 group3:

        openssl genpkey -algorithm DHX -out dhkey.pem -pkeyopt dh_rfc5114:3

       Generate a DH key using a DH parameters file:

        openssl genpkey -paramfile dhp.pem -out dhkey.pem

       Output DH parameters for safe prime group ffdhe2048:

        openssl genpkey -genparam -algorithm DH -out dhp.pem -pkeyopt group:ffdhe2048

       Output 2048 bit X9.42 DH parameters with 224 bit subgroup using RFC5114 group2:

        openssl genpkey -genparam -algorithm DHX -out dhp.pem -pkeyopt dh_rfc5114:2

       Output 2048 bit X9.42 DH parameters with 224 bit subgroup using FIP186-4 keygen:

        openssl genpkey -genparam -algorithm DHX -out dhp.pem -text \
            -pkeyopt pbits:2048 -pkeyopt qbits:224 -pkeyopt digest:SHA256 \
            -pkeyopt gindex:1 -pkeyopt dh_paramgen_type:2

       Output 1024 bit X9.42 DH parameters with 160 bit subgroup using FIP186-2 keygen:

        openssl genpkey -genparam -algorithm DHX -out dhp.pem -text \
            -pkeyopt pbits:1024 -pkeyopt qbits:160 -pkeyopt digest:SHA1 \
            -pkeyopt gindex:1 -pkeyopt dh_paramgen_type:1

       Output 2048 bit DH parameters:

        openssl genpkey -genparam -algorithm DH -out dhp.pem \
            -pkeyopt dh_paramgen_prime_len:2048

       Output 2048 bit DH parameters using a generator:

        openssl genpkey -genparam -algorithm DH -out dhpx.pem \
            -pkeyopt dh_paramgen_prime_len:2048 \
            -pkeyopt dh_paramgen_type:1

       Generate EC parameters:

        openssl genpkey -genparam -algorithm EC -out ecp.pem \
               -pkeyopt ec_paramgen_curve:secp384r1 \
               -pkeyopt ec_param_enc:named_curve

       Generate EC key from parameters:

        openssl genpkey -paramfile ecp.pem -out eckey.pem

       Generate EC key directly:

        openssl genpkey -algorithm EC -out eckey.pem \
               -pkeyopt ec_paramgen_curve:P-384 \
               -pkeyopt ec_param_enc:named_curve

       Generate an X25519 private key:

        openssl genpkey -algorithm X25519 -out xkey.pem

       Generate an ED448 private key:

        openssl genpkey -algorithm ED448 -out xkey.pem

HISTORY

       The ability to use NIST curve names, and to generate an EC key directly, were added in
       OpenSSL 1.0.2.  The ability to generate X25519 keys was added in OpenSSL 1.1.0.  The
       ability to generate X448, ED25519 and ED448 keys was added in OpenSSL 1.1.1.

       The -engine option was deprecated in OpenSSL 3.0.

COPYRIGHT

       Copyright 2006-2021 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the Apache License 2.0 (the "License").  You may not use this file except
       in compliance with the License.  You can obtain a copy in the file LICENSE in the source
       distribution or at <https://www.openssl.org/source/license.html>.