Provided by: openvswitch-common_3.0.0-0ubuntu1_amd64 bug

NAME

       ovsdb-server - Open vSwitch database server

SYNOPSIS

       ovsdb-server     [database]...      [relay:schema_name:remote]...     [--remote=remote]...
       [--run=command]

       Daemon options:
              [--pidfile[=pidfile]]      [--overwrite-pidfile]      [--detach]       [--no-chdir]
              [--no-self-confinement]

       Service options:
              [--service] [--service-monitor]

       Logging options:
              [-v[module[:destination[:level]]]]...
              [--verbose[=module[:destination[:level]]]]...
              [--log-file[=file]]

       Active-backup options:
              [--sync-from=server] [--sync-exclude-tables=db:table[,db:table]...]  [--active]

       Public key infrastructure options:
              [--private-key=privkey.pem]
              [--certificate=cert.pem]
              [--ca-cert=cacert.pem]
              [--bootstrap-ca-cert=cacert.pem]
              [--peer-ca-cert=peer-cacert.pem]

       SSL connection options:
              [--ssl-protocols=protocols]
              [--ssl-ciphers=ciphers]

       Runtime management options:
              --unixctl=socket

       Replay options:
              [--record[=directory]] [--replay[=directory]]

       Common options:
              [-h | --help] [-V | --version]

DESCRIPTION

       The  ovsdb-server  program  provides  RPC interfaces to one or more Open vSwitch databases
       (OVSDBs).  It supports JSON-RPC client connections over active or passive TCP/IP  or  Unix
       domain  sockets.  For an introduction to OVSDB and its implementation in Open vSwitch, see
       ovsdb(7).

       Each OVSDB file may be specified on the command line as database.  Relay databases may  be
       specified  on the command line as relay:schema_name:remote.  For a detailed description of
       relay database argument, see ovsdb(7).  If none of database files or  relay  databases  is
       specified,  the default is /etc/openvswitch/conf.db.  The database files must already have
       been created and initialized using, for example, ovsdb-tool's create,  create-cluster,  or
       join-cluster command.

       This OVSDB implementation supports standalone, active-backup, relay and clustered database
       service models, as well as database  replication.   See  the  Service  Models  section  of
       ovsdb(7) for more information.

       For  clustered  databases, when the --detach option is used, ovsdb-server detaches without
       waiting for the server to successfully join a cluster (if the  database  file  is  freshly
       created  with ovsdb-tool join-cluster) or connect to a cluster that it has already joined.
       Use ovsdb-client wait (see ovsdb-client(1)) to wait  until  the  server  has  successfully
       joined  and  connected to a cluster.  The same is true for relay databases.  Same commands
       could be used to wait for a relay database to connect to the relay source (remote).

       In addition to user-specified databases, ovsdb-server version 2.9 and  later  also  always
       hosts  a built-in database named _Server.  Please see ovsdb-server(5) for documentation on
       this database's schema.

OPTIONS

       --remote=remote
              Adds remote as a connection method used by ovsdb-server.   The  remote  may  be  an
              OVSDB  active  or  passive  connection  method,  e.g.  pssl:6640,  as  described in
              ovsdb(7).  The following additional form is also supported:

              db:db,table,column
                     Reads additional connection methods from column in all of the rows in  table
                     within  db.   As  the contents of column changes, ovsdb-server also adds and
                     drops connection methods accordingly.

                     If column's type is string or set of strings, then  the  connection  methods
                     are  taken  directly  from the column.  The connection methods in the column
                     must have one of the forms described above.

                     If column's type is UUID or set of UUIDs and references a table,  then  each
                     UUID  is  looked  up in the referenced table to obtain a row.  The following
                     columns in the row,  if  present  and  of  the  correct  type,  configure  a
                     connection method.  Any additional columns are ignored.

                     target (string)
                            Connection  method, in one of the forms described above.  This column
                            is mandatory: if it is missing or empty then no connection method can
                            be configured.

                     max_backoff (integer)
                            Maximum number of milliseconds to wait between connection attempts.

                     inactivity_probe (integer)
                            Maximum  number  of milliseconds of idle time on connection to client
                            before sending an inactivity probe message.

                     read_only (boolean)
                            If true, only read-only transactions are allowed on this connection.

                     It is an error for column to have another type.

              To connect or listen on multiple connection methods, use multiple --remote options.

       --run=command]
              Ordinarily ovsdb-server runs forever, or until it is  told  to  exit  (see  RUNTIME
              MANAGEMENT  COMMANDS below).  With this option, ovsdb-server instead starts a shell
              subprocess running command.  When  the  subprocess  terminates,  ovsdb-server  also
              exits  gracefully.   If  the  subprocess  exits  normally  with  exit  code 0, then
              ovsdb-server exits with exit code 0 also; otherwise, it exits with exit code 1.

              This option can be useful where a database server is needed only to  run  a  single
              command,   e.g.:   ovsdb-server   --remote=punix:socket   --run='ovsdb-client  dump
              unix:socket Open_vSwitch'

              This option is not supported on Windows platform.

   Daemon Options
       The following options are valid on POSIX based platforms.

       --pidfile[=pidfile]
              Causes a file (by default, ovsdb-server.pid) to be created indicating  the  PID  of
              the  running  process.  If the pidfile argument is not specified, or if it does not
              begin with /, then it is created in /var/run/openvswitch.

              If --pidfile is not specified, no pidfile is created.

       --overwrite-pidfile
              By default, when --pidfile is specified and the specified  pidfile  already  exists
              and  is  locked  by  a  running  process,  ovsdb-server  refuses to start.  Specify
              --overwrite-pidfile to cause it to instead overwrite the pidfile.

              When --pidfile is not specified, this option has no effect.

       --detach
              Runs ovsdb-server as a background process.  The process forks, and in the child  it
              starts  a  new  session,  closes  the standard file descriptors (which has the side
              effect of disabling logging to the console), and changes its current  directory  to
              the  root  (unless  --no-chdir  is  specified).   After  the  child  completes  its
              initialization, the parent exits.   ovsdb-server  detaches  only  after  it  starts
              listening  on  all  configured  remotes.  At this point, all standalone and active-
              backup databases are ready for use.  Clustered databases only become ready for  use
              after  they  finish  joining  their  clusters (which could have already happened in
              previous runs of ovsdb-server).

       --monitor
              Creates an additional process to monitor the ovsdb-server daemon.   If  the  daemon
              dies  due to a signal that indicates a programming error (SIGABRT, SIGALRM, SIGBUS,
              SIGFPE, SIGILL, SIGPIPE, SIGSEGV, SIGXCPU, or SIGXFSZ)  then  the  monitor  process
              starts  a  new  copy  of  it.   If the daemon dies or exits for another reason, the
              monitor process exits.

              This option is normally used with --detach, but it also functions without it.

       --no-chdir
              By default, when --detach is specified, ovsdb-server changes  its  current  working
              directory   to   the   root  directory  after  it  detaches.   Otherwise,  invoking
              ovsdb-server from a carelessly chosen directory  would  prevent  the  administrator
              from unmounting the file system that holds that directory.

              Specifying  --no-chdir  suppresses  this  behavior,  preventing  ovsdb-server  from
              changing its current working directory.  This may be  useful  for  collecting  core
              files,  since  it  is  common behavior to write core dumps into the current working
              directory and the root directory is not a good directory to use.

              This option has no effect when --detach is not specified.

       --no-self-confinement
              By default daemon will try to self-confine itself to work with  files  under  well-
              known directories determined during build.  It is better to stick with this default
              behavior and not to use this flag unless some  other  Access  Control  is  used  to
              confine daemon.  Note that in contrast to other access control implementations that
              are typically enforced from kernel-space (e.g. DAC  or  MAC),  self-confinement  is
              imposed  from  the user-space daemon itself and hence should not be considered as a
              full confinement strategy, but instead should be viewed as an additional  layer  of
              security.

       --user Causes  ovsdb-server  to  run  as  a different user specified in "user:group", thus
              dropping most of the root privileges. Short forms  "user"  and  ":group"  are  also
              allowed,  with current user or group are assumed respectively. Only daemons started
              by the root user accepts this argument.

              On Linux, daemons will be granted  CAP_IPC_LOCK  and  CAP_NET_BIND_SERVICES  before
              dropping   root  privileges.  Daemons  that  interact  with  a  datapath,  such  as
              ovs-vswitchd, will be granted three additional capabilities, namely  CAP_NET_ADMIN,
              CAP_NET_BROADCAST  and  CAP_NET_RAW.   The capability change will apply even if the
              new user is root.

              On  Windows,  this  option  is  not  currently  supported.  For  security  reasons,
              specifying this option will cause the daemon process not to start.

   Service Options
       The following options are valid only on Windows platform.

       --service
              Causes  ovsdb-server  to  run  as  a  service in the background. The service should
              already have been created through external tools like SC.exe.

       --service-monitor
              Causes the ovsdb-server service  to  be  automatically  restarted  by  the  Windows
              services manager if the service dies or exits for unexpected reasons.

              When --service is not specified, this option has no effect.

   Logging Options
       -v[spec]
       --verbose=[spec]
              Sets  logging  levels.   Without  any spec, sets the log level for every module and
              destination to dbg.  Otherwise, spec is a list of  words  separated  by  spaces  or
              commas or colons, up to one from each category below:

              •      A valid module name, as displayed by the vlog/list command on ovs-appctl(8),
                     limits the log level change to the specified module.

              •      syslog, console, or file, to limit the log  level  change  to  only  to  the
                     system  log,  to  the  console, or to a file, respectively.  (If --detach is
                     specified, ovsdb-server closes its standard file descriptors, so logging  to
                     the console will have no effect.)

                     On  Windows  platform, syslog is accepted as a word and is only useful along
                     with the --syslog-target option (the word has no effect otherwise).

              •      off, emer, err, warn, info, or dbg, to control the log level.   Messages  of
                     the  given severity or higher will be logged, and messages of lower severity
                     will be filtered out.  off filters out all messages.  See ovs-appctl(8)  for
                     a definition of each log level.

              Case is not significant within spec.

              Regardless  of  the  log levels set for file, logging to a file will not take place
              unless --log-file is also specified (see below).

              For compatibility with older versions of OVS, any is accepted as a word but has  no
              effect.

       -v
       --verbose
              Sets the maximum logging verbosity level, equivalent to --verbose=dbg.

       -vPATTERN:destination:pattern
       --verbose=PATTERN:destination:pattern
              Sets  the  log  pattern  for  destination to pattern.  Refer to ovs-appctl(8) for a
              description of the valid syntax for pattern.

       -vFACILITY:facility
       --verbose=FACILITY:facility
              Sets the RFC5424 facility of the log message. facility can be one  of  kern,  user,
              mail, daemon, auth, syslog, lpr, news, uucp, clock, ftp, ntp, audit, alert, clock2,
              local0, local1, local2, local3, local4, local5, local6 or local7. If this option is
              not specified, daemon is used as the default for the local system syslog and local0
              is used while sending a message to the  target  provided  via  the  --syslog-target
              option.

       --log-file[=file]
              Enables logging to a file.  If file is specified, then it is used as the exact name
              for the log  file.   The  default  log  file  name  used  if  file  is  omitted  is
              /var/log/openvswitch/ovsdb-server.log.

       --syslog-target=host:port
              Send  syslog  messages  to UDP port on host, in addition to the system syslog.  The
              host must be a numerical IP address, not a hostname.

       --syslog-method=method
              Specify method how syslog messages should be  sent  to  syslog  daemon.   Following
              forms are supported:

              •      libc,  use  libc  syslog() function.  Downside of using this options is that
                     libc adds fixed prefix to every message before it is actually  sent  to  the
                     syslog daemon over /dev/log UNIX domain socket.

              •      unix:file,  use  UNIX  domain  socket  directly.   It is possible to specify
                     arbitrary message format with this option.  However, rsyslogd 8.9 and  older
                     versions  use  hard  coded  parser  function  anyway that limits UNIX domain
                     socket use.  If you want to use arbitrary message format with older rsyslogd
                     versions, then use UDP socket to localhost IP address instead.

              •      udp:ip:port,  use  UDP  socket.   With  this  method  it  is possible to use
                     arbitrary message format also with  older  rsyslogd.   When  sending  syslog
                     messages  over  UDP  socket extra precaution needs to be taken into account,
                     for example, syslog daemon needs to be configured to listen on the specified
                     UDP  port,  accidental iptables rules could be interfering with local syslog
                     traffic and there  are  some  security  considerations  that  apply  to  UDP
                     sockets, but do not apply to UNIX domain sockets.

              •      null, discards all messages logged to syslog.

              The  default  is  taken  from  the OVS_SYSLOG_METHOD environment variable; if it is
              unset, the default is libc.

   Active-Backup Options
       These  options  support  the  ovsdb-server  active-backup  service  model   and   database
       replication.   These options apply only to databases in the format used for standalone and
       active-backup databases, which is the database format created by  ovsdb-tool  create.   By
       default,  when  it  serves  a  database  in this format, ovsdb-server runs as a standalone
       server.  These options can configure it for active-backup use:

       •      Use --sync-from=server to start the server in the  backup  role,  replicating  data
              from  server.   When  ovsdb-server  is  running  as a backup server, it rejects all
              transactions that can modify the database content, including  lock  commands.   The
              same form can be used to configure the local database as a replica of server.

       •      Use  --sync-from=server  --active  to  start  the  server  in  the active role, but
              prepared to switch to the backup role in which it would replicate data from server.
              When  ovsdb-server runs in active mode, it allows all transactions, including those
              that modify the database.

       At runtime, management commands can change a server's role and  otherwise  manage  active-
       backup features.  See Active-Backup Commands, below, for more information.

       --sync-from=server
              Sets  up  ovsdb-server  to  synchronize its databases with the databases in server,
              which must be an active connection  method  in  one  of  the  forms  documented  in
              ovsdb-client(1).   Every  transaction  committed  by  server  will be replicated to
              ovsdb-server.  This option  makes  ovsdb-server  start  as  a  backup  server;  add
              --active to make it start as an active server.

       --sync-exclude-tables=db:table[,db:table]...
              Causes the specified tables to be excluded from replication.

       --active
              By  default,  --sync-from makes ovsdb-server start up as a backup for server.  With
              --active, however, ovsdb-server starts as an active server.   Use  this  option  to
              allow the syncing options to be specified using command line options, yet start the
              server, as the default, active server.  To switch  the  running  server  to  backup
              mode,  use  ovs-appctl(1)  to  execute the ovsdb-server/connect-active-ovsdb-server
              command.

   Public Key Infrastructure Options
       The options described below for configuring the SSL public  key  infrastructure  accept  a
       special  syntax  for  obtaining  their  configuration  from the database.  If any of these
       options is given db:db,table,column as its argument, then the actual  file  name  is  read
       from  the  specified  column  in  table within the db database.  The column must have type
       string or set of strings.  The first nonempty string in the table is  taken  as  the  file
       name.  (This means that ordinarily there should be at most one row in table.)

       -p privkey.pem
       --private-key=privkey.pem
              Specifies a PEM file containing the private key used as ovsdb-server's identity for
              outgoing SSL connections.

       -c cert.pem
       --certificate=cert.pem
              Specifies a PEM file containing  a  certificate  that  certifies  the  private  key
              specified on -p or --private-key to be trustworthy.  The certificate must be signed
              by the certificate authority (CA) that the peer in  SSL  connections  will  use  to
              verify it.

       -C cacert.pem
       --ca-cert=cacert.pem
              Specifies  a PEM file containing the CA certificate that ovsdb-server should use to
              verify certificates  presented  to  it  by  SSL  peers.   (This  may  be  the  same
              certificate  that  SSL  peers  use  to  verify  the  certificate specified on -c or
              --certificate, or it may be a different one, depending on the PKI design in use.)

       -C none
       --ca-cert=none
              Disables verification of certificates presented by SSL peers.   This  introduces  a
              security risk, because it means that certificates cannot be verified to be those of
              known trusted hosts.

       --bootstrap-ca-cert=cacert.pem
              When cacert.pem exists, this option has the same effect as -C or --ca-cert.  If  it
              does  not  exist,  then ovsdb-server will attempt to obtain the CA certificate from
              the SSL peer on its first SSL connection and save it to the named PEM file.  If  it
              is successful, it will immediately drop the connection and reconnect, and from then
              on all SSL connections must be authenticated by a  certificate  signed  by  the  CA
              certificate thus obtained.

              This  option exposes the SSL connection to a man-in-the-middle attack obtaining the
              initial CA certificate, but it may be useful for bootstrapping.

              This option is only useful if the SSL peer sends its CA certificate as part of  the
              SSL certificate chain.  The SSL protocol does not require the server to send the CA
              certificate.

              This option is mutually exclusive with -C and --ca-cert.

       --peer-ca-cert=peer-cacert.pem
              Specifies a PEM file that contains one or more additional certificates to  send  to
              SSL   peers.    peer-cacert.pem   should   be  the  CA  certificate  used  to  sign
              ovsdb-server's own certificate,  that  is,  the  certificate  specified  on  -c  or
              --certificate.   If  ovsdb-server's  certificate is self-signed, then --certificate
              and --peer-ca-cert should specify the same file.

              This option is not useful in normal operation, because the SSL  peer  must  already
              have  the  CA  certificate  for  the  peer to have any confidence in ovsdb-server's
              identity.  However, this offers a way for a new installation to  bootstrap  the  CA
              certificate on its first SSL connection.

   SSL Connection Options
       --ssl-protocols=protocols
              Specifies, in a comma- or space-delimited list, the SSL protocols ovsdb-server will
              enable for SSL  connections.   Supported  protocols  include  TLSv1,  TLSv1.1,  and
              TLSv1.2.  Regardless of order, the highest protocol supported by both sides will be
              chosen when making the connection.  The default when  this  option  is  omitted  is
              TLSv1,TLSv1.1,TLSv1.2.

       --ssl-ciphers=ciphers
              Specifies,  in  OpenSSL cipher string format, the ciphers ovsdb-server will support
              for SSL connections.  The default when this option is omitted is HIGH:!aNULL:!MD5.

   Other Options
       --unixctl=socket
              Sets the name of the control socket  on  which  ovsdb-server  listens  for  runtime
              management  commands  (see RUNTIME MANAGEMENT COMMANDS, below).  If socket does not
              begin with /, it is interpreted as relative to /var/run/openvswitch.  If  --unixctl
              is       not       used      at      all,      the      default      socket      is
              /var/run/openvswitch/ovsdb-server.pid.ctl, where pid is ovsdb-server's process ID.

              On Windows a local named pipe is used to listen for runtime management commands.  A
              file  is  created  in the absolute path as pointed by socket or if --unixctl is not
              used at all, a file is created as ovsdb-server.ctl  in  the  configured  OVS_RUNDIR
              directory.  The file exists just to mimic the behavior of a Unix domain socket.

              Specifying none for socket disables the control socket feature.

       --record[=directory]
              Sets  the process in "recording" mode, in which it will record all the connections,
              data from streams (Unix domain  and  network  sockets)  and  some  other  important
              necessary bits, so they could be replayed later.  Recorded data is stored in replay
              files in  specified  directory.   If  directory  does  not  begin  with  /,  it  is
              interpreted  as  relative  to /var/run/openvswitch.  If directory is not specified,
              /var/run/openvswitch will be used.

       --replay[=directory]
              Sets the process in  "replay"  mode,  in  which  it  will  read  information  about
              connections,  data  from  streams  (Unix domain and network sockets) and some other
              necessary bits directly from replay files instead of using  real  sockets.   Replay
              files  from  the directory will be used.  If directory does not begin with /, it is
              interpreted as relative to /var/run/openvswitch.  If directory  is  not  specified,
              /var/run/openvswitch will be used.

       -h
       --help Prints a brief help message to the console.

       -V
       --version
              Prints version information to the console.

RUNTIME MANAGEMENT COMMANDS

       ovs-appctl(8)  can  send  commands  to  a  running  ovsdb-server  process.   The currently
       supported commands are described below.

   ovsdb-server Commands
       These commands are specific to ovsdb-server.

       exit   Causes ovsdb-server to gracefully terminate.

       ovsdb-server/compact [db]
              Compacts database db in-place.  If db is not specified, compacts every database in-
              place.   A database is also compacted automatically when a transaction is logged if
              it is over 2 times as large as its previous compacted size (and at  least  10  MB),
              but  not  before  100  commits have been added or 10 minutes have elapsed since the
              last compaction. It will also be compacted automatically after 24 hours  since  the
              last compaction if 100 commits were added regardless of its size.

       ovsdb-server/memory-trim-on-compaction on|off
              If  this option is on, ovsdb-server will try to reclaim all unused heap memory back
              to the system after each  successful  database  compaction  to  reduce  the  memory
              consumption of the process.  off by default.

       ovsdb-server/reconnect
              Makes  ovsdb-server  drop  all  of the JSON-RPC connections to database clients and
              reconnect.

              This command might be useful for debugging issues with database clients.

       ovsdb-server/add-remote remote
              Adds a remote, as if --remote=remote had been specified on the ovsdb-server command
              line.   (If  remote is already a remote, this command succeeds without changing the
              configuration.)

       ovsdb-server/remove-remote remote
              Removes the specified remote from the  configuration,  failing  with  an  error  if
              remote  is  not  configured as a remote.  This command only works with remotes that
              were named on --remote or ovsdb-server/add-remote, that  is,  it  will  not  remove
              remotes  added indirectly because they were read from the database by configuring a
              db:db,table,column   remote.    (You   can   remove   a   database   source    with
              ovsdb-server/remove-remote  db:db,table,column,  but  not  individual remotes found
              indirectly through the database.)

       ovsdb-server/list-remotes
              Outputs  a  list  of  the  currently  configured  remotes  named  on  --remote   or
              ovsdb-server/add-remote, that is, it does not list remotes added indirectly because
              they were read from the database by configuring a db:db,table,column remote.

       ovsdb-server/add-db database
              Adds the database to the running ovsdb-server.  database could be a  database  file
              or  a  relay  description  in  the following format: relay:schema_name:remote.  The
              database file must already have been created and initialized  using,  for  example,
              ovsdb-tool create.

       ovsdb-server/remove-db database
              Removes  database  from the running ovsdb-server.  database must be a database name
              as listed by ovsdb-server/list-dbs.

              If a remote has been  configured  that  points  to  the  specified  database  (e.g.
              --remote=db:database,...  on  the  command  line),  then  it will be disabled until
              another database with the same name is added again (with ovsdb-server/add-db).

              Any public  key  infrastructure  options  specified  through  this  database  (e.g.
              --private-key=db:database,...  on  the command line) will be disabled until another
              database with the same name is added again (with ovsdb-server/add-db).

       ovsdb-server/list-dbs
              Outputs a list of the currently  configured  databases  added  either  through  the
              command line or through the ovsdb-server/add-db command.

       ovsdb-server/tlog-set database:table on|off
              Enables  or  disables  logging of all operations executed on the specified database
              and table.  Logs are generated at INFO level and are rate limtied.

       ovsdb-server/tlog-list
              Displays the logging state for all currently configured databases and tables.

   Active-Backup Commands
       These commands query and update the role of ovsdb-server within an active-backup  pair  of
       servers.   See  Active-Backup  Options, above, and Active-Backup Database Service Model in
       ovsdb(7) for more information.

       ovsdb-server/set-active-ovsdb-server server
              Sets    the   active   server   from   which    ovsdb-server    connects    through
              ovsdb-server/connect-active-ovsdb-server.   This overrides the --sync-from command-
              line option.

       ovsdb-server/get-active-ovsdb-server
              Gets the active server from  which  ovsdb-server  is  currently  synchronizing  its
              databases.

       ovsdb-server/connect-active-ovsdb-server
              Switches  the  server  to  a  backup  role.   The  server  starts synchronizing its
              databases with the active server specified by  ovsdb-server/set-active-ovsdb-server
              (or   the   --sync-from   command-line  option)  and  closes  all  existing  client
              connections, which requires clients to reconnect.

       ovsdb-server/disconnect-active-ovsdb-server
              Switches the server  to  an  active  role.   The  server  stops  synchronizing  its
              databases  with  an active server and closes all existing client connections, which
              requires clients to reconnect.

       ovsdb-server/set-active-ovsdb-server-probe-interval probe interval
              Sets  the probe interval (in milli seconds) for the connection to active server.

       ovsdb-server/set-sync-exclude-tables db:table[,db:table]...
              Sets the table  within  db  that  will  be  excluded  from  synchronization.   This
              overrides the --sync-exclude-tables command-line option.

       ovsdb-server/get-sync-exclude-tables
              Gets  the  tables  that are currently excluded from synchronization.

       ovsdb-server/sync-status
              Prints  a  summary  of  replication  run time information. The state information is
              always provided, indicating whether the server is running  in  the  active  or  the
              backup mode.  When running in backup mode, replication connection status, which can
              be either connecting, replicating or error, are shown.  When the connection  is  in
              replicating   state,   further   output  shows  the  list  of  databases  currently
              replicating, and the tables that are excluded.

   Cluster Commands
       These commands support the ovsdb-server clustered  service  model.   They  apply  only  to
       databases in the format used for clustered databases, which is the database format created
       by ovsdb-tool create-cluster and ovsdb-tool join-cluster.

       cluster/cid db
              Prints the cluster ID for db, which is a UUID that identifies the cluster.   If  db
              is   a  database  newly  created  by  ovsdb-tool  cluster-join  that  has  not  yet
              successfully joined its cluster, and --cid was not specified  on  the  cluster-join
              command  line, then this command will report an error because the cluster ID is not
              yet known.

       cluster/sid db
              Prints the server ID for db, which is a UUID that identifies this server within the
              cluster.

       cluster/status db
              Prints this server's status within the cluster and the status of its connections to
              other servers in the cluster.

       cluster/leave db
              This command starts the server gracefully removing itself  from  its  cluster.   At
              least  one  server must remain, and the cluster must be healthy, that is, over half
              of the cluster's servers must be up.

              When the server successfully leaves  the  cluster,  it  stops  serving  db,  as  if
              ovsdb-server/remove-db db had been executed.

              Use  ovsdb-client  wait (see ovsdb-client(1)) to wait until the server has left the
              cluster.

              Once a server leaves a cluster, it may never rejoin  it.   Instead,  create  a  new
              server and join it to the cluster.

              Note  that  removing  the  server  from  the  cluster  alters the total size of the
              cluster. For example, if you remove two servers from a three server  cluster,  then
              the "cluster" becomes a single functioning server.  This does not result in a three
              server cluster that lacks quorum.

       cluster/kick db server
              Start graceful removal of server from db's  cluster,  like  cluster/leave  (without
              --force) except that it can remove any server, not just this one.

              server may be a server ID, as printed by cluster/sid, or the server's local network
              address as passed to ovsdb-tool's  create-cluster  or  join-cluster  command.   Use
              cluster/status to see a list of cluster members.

       cluster/change-election-timer db time
              Change the leader election timeout base value of the cluster, in milliseconds.

              Leader  election  will be initiated by a follower if there is no heartbeat received
              from the leader within this time plus a random time within 1 second.

              The default value is 1000, if not changed with this command.  This command  can  be
              used  to  adjust  the  value  when  necessary,  according  to the expected load and
              response time of the servers.

              This command must be executed on the  leader.   It  initiates  the  change  to  the
              cluster.  To see if the change takes effect (committed), use cluster/status to show
              the current setting.  Once a change is committed, it persists at server restarts.

       cluster/set-backlog-threshold db n_msgs n_bytes
              Sets the backlog limits for db's RAFT connections to a maximum of  n_msgs  messages
              or  n_bytes  bytes.  If the backlog on one of the connections reaches the limit, it
              will be disconnected (and re-established).  Values are checked only if the  backlog
              contains more than 50 messages.

   VLOG COMMANDS
       These commands manage ovsdb-server's logging settings.

       vlog/set [spec]
              Sets  logging  levels.   Without  any spec, sets the log level for every module and
              destination to dbg.  Otherwise, spec is a list of  words  separated  by  spaces  or
              commas or colons, up to one from each category below:

              •      A valid module name, as displayed by the vlog/list command on ovs-appctl(8),
                     limits the log level change to the specified module.

              •      syslog, console, or file, to limit the log  level  change  to  only  to  the
                     system log, to the console, or to a file, respectively.

                     On  Windows  platform, syslog is accepted as a word and is only useful along
                     with the --syslog-target option (the word has no effect otherwise).

              •      off, emer, err, warn, info, or dbg, to control the log level.   Messages  of
                     the  given severity or higher will be logged, and messages of lower severity
                     will be filtered out.  off filters out all messages.  See ovs-appctl(8)  for
                     a definition of each log level.

              Case is not significant within spec.

              Regardless  of  the  log levels set for file, logging to a file will not take place
              unless ovsdb-server was invoked with the --log-file option.

              For compatibility with older versions of OVS, any is accepted as a word but has  no
              effect.

       vlog/set PATTERN:destination:pattern
              Sets  the  log  pattern  for  destination to pattern.  Refer to ovs-appctl(8) for a
              description of the valid syntax for pattern.

       vlog/list
              Lists the supported logging modules and their current levels.

       vlog/list-pattern
              Lists logging patterns used for each destination.

       vlog/close
              Causes ovsdb-server to close its log file, if it  is  open.   (Use  vlog/reopen  to
              reopen it later.)

       vlog/reopen
              Causes  ovsdb-server  to  close  its  log  file, if it is open, and then reopen it.
              (This is useful after rotating log files, to cause a new log file to be used.)

              This has no effect unless ovsdb-server was invoked with the --log-file option.

       vlog/disable-rate-limit [module]...
       vlog/enable-rate-limit [module]...
              By default, ovsdb-server limits the rate at which certain messages can  be  logged.
              When a message would appear more frequently than the limit, it is suppressed.  This
              saves disk space,  makes  logs  easier  to  read,  and  speeds  up  execution,  but
              occasionally      troubleshooting     requires     more     detail.      Therefore,
              vlog/disable-rate-limit allows rate limits to  be  disabled  at  the  level  of  an
              individual  log  module.   Specify  one  or  more module names, as displayed by the
              vlog/list command.  Specifying either no module names at all  or  the  keyword  any
              disables rate limits for every log module.

              The    vlog/enable-rate-limit    command,    whose    syntax   is   the   same   as
              vlog/disable-rate-limit, can be used to re-enable a rate limit that was  previously
              disabled.

   MEMORY COMMANDS
       These commands report memory usage.

       memory/show
              Displays  some  basic  statistics  about ovsdb-server's memory usage.  ovsdb-server
              also logs this information soon  after  startup  and  periodically  as  its  memory
              consumption grows.

   COVERAGE COMMANDS
       These  commands  manage  ovsdb-server's  ``coverage  counters,'' which count the number of
       times particular events occur during a daemon's runtime.  In addition to  these  commands,
       ovsdb-server  automatically  logs  coverage counter values, at INFO level, when it detects
       that the daemon's main loop takes unusually long to run.

       Coverage counters are useful mainly for performance analysis and debugging.

       coverage/show
              Displays the averaged per-second rates for the last few seconds,  the  last  minute
              and the last hour, and the total counts of all of the coverage counters.

       coverage/read-counter counter
              Displays the total count for the given coverage counter.

BUGS

       In  Open  vSwitch  before  version 2.4, when ovsdb-server sent JSON-RPC error responses to
       some requests, it incorrectly formulated them with the result and error swapped,  so  that
       the  response  appeared  to  indicate  success  (with a nonsensical result) rather than an
       error.  The requests that suffered from this problem were:

       transact
       get_schema
              Only if the request names a nonexistent database.

       monitor
       lock
       unlock In all error cases.

       Of these cases, the only error that a well-written application is likely to  encounter  in
       practice  is  monitor  of  tables  or columns that do not exist, in an situation where the
       application has been upgraded but the old database schema is still temporarily in use.  To
       handle  this  situation  gracefully,  we  recommend  that  clients  should treat a monitor
       response with a result that contains an error key-value pair as an  error  (assuming  that
       the database being monitored does not contain a table named error).

SEE ALSO

       ovsdb(7), ovsdb-tool(1), ovsdb-server(5), ovsdb-server(7).