Provided by: netpbm_10.97.00-2_amd64 
NAME
pamarith - perform arithmetic on two Netpbm images
SYNOPSIS
pamarith -add | -subtract | -multiply | -divide | -difference | -minimum | -maximum |
-mean | -equal | -compare | -and | -or | -nand | -nor | -xor | -shiftleft | -shiftright
[-closeness=N] pamfile1 pamfile2 ...
All options can be abbreviated to their shortest unique prefix. You may use two hyphens
instead of one. You may separate an option name and its value with white space instead of
an equals sign.
DESCRIPTION
This program is part of Netpbm(1).
pamarith reads two or more PBM, PGM, PPM, or PAM images as input. It performs the
specified binary arithmetic operation on their sample values and produces an output of a
format which is the more general of the two input formats. The two input images must be
of the same width and height. The arithmetic is performed on each pair of identically
located tuples to generate the identically located tuple of the output.
For functions that are commutative and associative, pamarith applies
the binary function repetitively on as many input images as you supply. For
example, for -add , the output is the sum of all the inputs. For
other functions (e.g. -subtract), the program fails if you supply
more than two input images. (Before Netpbm 10.93 (December 2020), the
program always failed with more than two input images).
For some other functions, pamarith could theoretically compute a
meaningful result for multiple arguments, but it fails nonetheless if you
give more than two input images. -mean and -equal are in that
category.
Most of what pamarith does is not meaningful for visual images. It
works toward Netpbm's secondary purpose of just manipulating arbitrary
matrices of numbers.
For the purpose of the calculation, it assumes any PBM, PGM, or PPM input image is the
equivalent PAM image of tuple type BLACKANDWHITE, GRAYSCALE, or RGB, respectively, and if
it produces a PBM, PGM, or PPM output, produces the equivalent of the PAM image which is
the result of the calculation.
The first pamfile argument identifies the "left" argument image; the second pamfile
argument identifies the "right" one.
If the output is PAM, the tuple type is the same as the tuple type of the left input
image.
pamarith performs the arithmetic on each pair of identically located tuples in the two
input images.
The arithmetic operation is in all cases fundamentally a function from two integers to an
integer (but see below - the functions are defined in ways that you can effectively e.g.
add real numbers). The operation is performed on two tuples as follows. The two input
images must have the same depth, or one of them must have depth one. pamarith fails if
one of these is not the case.
If they have the same depth, pamarith simply carries out the arithmetic one sample at a
time. I.e. if at a particular position the left input image contains the tuple
(s1,s2,...,sN) and the right input image contains the tuple (t1,t2,...tN), and the
function is f, then the output image contains the tuple (f(s1,t1),f(s2,t2),...,f(sN,tN)).
If one of the images has depth 1, the arithmetic is performed between the one sample in
that image and each of the samples in the other. I.e. if at a particular position the
left input image contains the tuple (s) and the right input image contains the tuple
(t1,t2,...tN), and the function is f, then the output image contains the tuple
(f(s,t1),f(s,t2),...,f(s,tN)).
PBM Oddness
If you're familiar with the PBM format, you may find pamarith's operation on PBM images to
be nonintuitive. Because in PBM black is represented as 1 and white as 0, you might be
expecting black minus black to be white.
But the PBM format is irrelevant, because pamarith operates on the numbers found in the
PAM equivalent (see above). In a PAM black and white image, black is 0 and white is 1.
So black minus black is black.
Maxval
The meanings of the samples with respect to the maxval varies according to the function
you select.
In PAM images in general, the most usual meaning of a sample (the one that applies when a
PAM image represents a visual image), is that it represents a fraction of some maximum.
The maxval of the image corresponds to some maximum value (in the case of a visual image,
it corresponds to "full intensity."), and a sample value divided by the maxval gives the
fraction.
For pamarith, this interpretation applies to the regular arithmetic functions: -add,
-subtract, -multiply, -divide, -difference, -minimum, -maximum, -mean, -equal, and
-compare. For those, you should think of the arguments and result as numbers in the range
[0,1). For example, if the maxval of the left argument image is 100 and the maxval of the
right argument image is 200 and the maxval of the output image is 200, and the left sample
value in an -add calculation is 50 and the right sample is 60, the actual calculation is
50/100 + 60/200 = 160/200, and the output sample value is 160.
For these functions, pamarith makes the output image's maxval the maximum of the two input
maxvals, except with -equal and -compare. For -equal, the output maxval is always 1.
For -compare, it is always 2. (Before Netpbm 10.14 (February 2003), there was no
exception for -compare; in 10.14, the exception was just that the maxval was at least 2,
and sometime between 10.18 and 10.26 (January 2005), it changed to being exactly 2).
If the result of a calculation falls outside the range [0, 1), pamarith clips it -- i.e.
considers it to be zero or 1-.
In many cases, where both your input maxvals are the same, you can just think of the
operation as taking place between the sample values directly, with no consideration of the
maxval except for the clipping. E.g. an -add of sample value 5 to sample value 8 yields
sample value 13.
But with -multiply, this doesn't work. Say your two input images have maxval 255, which
means the output image also has maxval 255. Consider a location in the image where the
input sample values are 5 and 10. You might think the multiplicative product of those
would yield 50 in the output. But pamarith carries out the arithmetic on the fractions
5/255 and 10/255. It multiplies those together and then rescales to the output maxval,
giving a sample value in the output PAM of 50/255 rounded to the nearest integer: 0.
With the bit string operations, the maxval has a whole different meaning. The operations
in question are: -and, -or, -nand, -nor, -xor, and -shiftleft, -shiftright.
With these, each sample value in one or both input images, and in the output image,
represents a bit string, not a number. The maxval tells how wide the bit string is. The
maxval must be a full binary count (a power of two minus one, such as 0xff) and the number
of ones in it is the width of the bit string. For the dyadic bit string operations
(that's everything but the shift functions), the maxvals of the input images must be the
same and pamarith makes the maxval of the output image the same.
For the bit shift operations, the output maxval is the same as the left input maxval. The
right input image (which contains the shift counts) can have any maxval and the maxval is
irrelevant to the interpretation of the samples. The sample value is the actual shift
count. But it's still required that no sample value exceed the maxval.
NOTE: UNARY FUNCTIONS
pamarith applies only binary functions. If you want to apply a unary function, e.g.
"halve", to a single image, use pamfunc.
OPTIONS
In addition to the options common to all programs based on libnetpbm (most notably -quiet,
see
Common Options ⟨index.html#commonoptions⟩ ), pamarith recognizes the following command
line options:
The Function
These options select the function that pamarith applies.
You must specify one of these, and cannot specify more than one.
-add Adds the two values. If the result is larger than maxval, it is clipped.
-subtract
Subtracts a value in the right input image from a value in the left input image.
-minimum
Chooses the smaller value of the two.
-maximum
Chooses the larger value of the two.
-difference
Calculates the absolute value of the difference.
-multiply
Does an ordinary arithmetic multiplication, but tends to produce nonobvious results
because of the way pamarith interprets sample values. See Maxval ⟨#maxval⟩ .
-divide
Divides a value in the left input image by the value in the right input image. But
like -multiply, it tends to produce nonobvious results. Note that pamarith
clipping behavior makes this of little use when the left argument (dividend) is
greater than the right argument (divisor) -- the result in that case is always the
maxval. If the divisor is 0, the result is the maxval.
-divide was new in Netpbm 10.30 (October 2005).
-equal Produces maxval when the values in the two images are equal and zero when they are
not. Note that the output maxval is always 1 for -equal.
If the maxvals of the input images are not identical, pamarith may claim two values
are not equal when in fact they are, because of the precision with which it does
the arithmetic. However, it will never say A is greater than B if A is less than
B.
You can make the equality test approximate with the -closeness option. This gives
the percentage of maxval by which the samples can differ and still be considered
equal.
-equal was new in Netpbm 10.93 (December 2020).
-compare
Produces the value 0 when the value in the left input image is less than the value
in the right input image, 1 when the values are equal, and 2 when the left is
greater than the right.
If the maxvals of the input images are not identical, pamarith may claim two values
are not equal when in fact they are, because of the precision with which it does
the arithmetic. However, it will never say A is greater than B if A is less than
B.
-compare was new in Netpbm 10.13 (December 2002).
-and, -nand, -or, -nor, -xor
These consider the input and output images to contain bit strings; they compute
bitwise logic operations. Note that if the maxval is 1, you can also look at these
as logic operations on boolean input values. See section Maxval ⟨#maxval⟩ for the
special meaning of maxval with respect to bit string operations such as these.
-shiftleft, -shiftright
These consider the left input image and output image to contain bit strings. They
compute a bit shift operation, with bits falling off the left or right end and
zeroes shifting in, as opposed to bits off one end to the other. The right input
image sample value is the number of bit positions to shift.
Note that the maxval (see Maxval ⟨#maxval⟩ ) determines the width of the frame
within which you are shifting.
Other
-closeness
This changes the meaning of -equal. It is not valid with any other function. See
the description of -equal.
SEE ALSO
pamfunc(1), pamsummcol(1), pamsumm(1), pnminvert(1), pambrighten(1), ppmdim(1),
pnmconvol(1), pamdepth(1), pnmpsnr(1), pnm(1), pam(1)
HISTORY
pamarith replaced pnmarith in Netpbm 10.3 (June 2002).
In Netpbm 10.3 through 10.8, though, pamarith was not backward compatible because it
required the input images to be of the same depth, so you could not multiply a PBM by a
PPM as is often done for masking. (It was not intended at the time that pnmarith would be
removed from Netpbm -- the plan was just to rewrite it to use pamarith; it was removed by
mistake).
But starting with Netpbm 10.9 (September 2002), pamarith allows the images to have
different depths as long as one of them has depth 1, and that made it backward compatible
with pnmarith.
The original pnmarith did not have the -mean option.
The -compare option was added in Netpbm 10.13 (December 2002).
The bit string operations were added in Netpbm 10.27 (March 2005).
The -divide option was added in Netpbm 10.30 (October 2005).
The ability to have more than one input (operand) was added in Netpbm 10.93 (December
2020).
The -equal option was added in Netpbm 10.93 (December 2020).
DOCUMENT SOURCE
This manual page was generated by the Netpbm tool 'makeman' from HTML source. The master
documentation is at
http://netpbm.sourceforge.net/doc/pamarith.html