Provided by: ipv6toolkit_2.0+ds.1-2_amd64 bug

NAME

       path6 - A versatile IPv6-based traceroute tool

SYNOPSIS

       path6  [-d]  [-i  INTERFACE] [-s SRC_ADDR[/LEN]] [-S LINK_SRC_ADDR] [-D LINK_DST_ADDR] [-y
       FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-r  LIMIT]
       [-p PROBE_TYPE] [-P PAYLOAD_SIZE] [-a DST_PORT] [-X TCP_FLAGS] [-v] [-h]

DESCRIPTION

       path6 is an IPv6 traceroute tool, with full support for IPv6 Extension Headers. It is part
       of the SI6 Networks' IPv6 Toolkit: a security assessment suite for the IPv6 protocols.

OPTIONS

       path6 takes its parameters as command-line options. Each of the options can  be  specified
       with a short name (one character preceded with the hyphen character, as e.g. "-i") or with
       a long name (a string preceded with two hyphen characters, as e.g. "--interface").

       Most of probe packet details can be specified by means of the available options. When  TCP
       or  UDP probe packets are employed, the Source Port of the probe packets is used to encode
       the probe packet number.

       The current version of the tool will only  print  IPv6  addresses  and  will  not  try  to
       reverse-map such IPv6 addresses into hostnames.

       -i interface, --interface interface

              This option specifies the network interface to be used by the path6 tool. It can be
              used for overriding the output interface selected based on the local routing table.

       -s SRC_ADDR, --src-address SRC_ADDR

              This option specifies the IPv6 source address (or IPv6 prefix) to be used  for  the
              Source  Address of the attack packets. If a prefix is specified, the Source Address
              is randomly selected from that prefix.

       -d DST_ADDR, --dst-address DST_ADDR

              This option specifies the IPv6 Destination Address of the target.

       -S SRC_LINK_ADDR, --src-link-address SRC_LINK_ADDR

              This option can be used to override the link-layer Source Address of the packets.

       -D DST_LINK_ADDR, --dst-link-address DST_LINK_ADDR

              This option can be used to override  the  link-layer  Destination  Address  of  the
              outgoing packets.

       -y SIZE, --frag-hdr SIZE

              This  option specifies that the probe packets must be fragmented. The fragment size
              must be specified as an argument to this option.

       -u HDR_SIZE, --dst-opt-hdr HDR_SIZE

              This option specifies that a Destination Options header is to be  included  in  the
              outgoing  packet(s).  The extension header size must be specified as an argument to
              this option (the header is  filled  with  padding  options).  Multiple  Destination
              Options headers may be specified by means of multiple "-u" options.

       -U HDR_SIZE, --dst-opt-u-hdr HDR_SIZE

              This  option  specifies  a  Destination  Options  header  to  be  included  in  the
              "unfragmentable part" of the outgoing packet(s). The header size must be  specified
              as an argument to this option (the header is filled with padding options). Multiple
              Destination Options headers may be specified by means of multiple "-U" options.

       -H HDR_SIZE, --hbh-opt-hdr HDR_SIZE

              This option specifies that a Hop-by-Hop Options header is to  be  included  in  the
              outgoing packet(s). The header size must be specified as an argument to this option
              (the header is filled with padding options). Multiple  Hop-by-Hop  Options  headers
              may be specified by means of multiple "-H" options.

       -p PROBE_TYPE, --probe-type PROBE_TYPE

              This  option  specifies  the  protocol  to  be used for the probe packets. Possible
              arguments are: "icmp" (for ICMPv6 Echo Request), "tcp" (for TCP),  and  "udp"  (for
              UDP). If left unspecified, the probe packets default to ICMPv6 Echo Request.

       -P PAYLOAD_SIZE, --payload-size PAYLOAD_SIZE

              This option specifies the payload size of the probe packets.

       -o SRC_PORT, --src-port SRC_PORT

              This option specifies the TCP/UDP Source Port. If left unspecified, the Source Port
              is randomized from the range 1024-65535.

       -a DST_PORT, --dst-port DST_PORT

              This option specifies the  TCP/UDP  Destination  Port.  If  left  unspecified,  the
              Destination  Port  defaults  to 80 for the TCP case, and a randomized value (in the
              range 60000-65000) for the UDP case.

       -X TCP_FLAGS, --tcp-flags TCP_FLAGS

              This option is used to set specific the TCP flags. The flags are specified  as  "F"
              (FIN), "S" (SYN), "R" (RST), "P" (PSH), "A" (ACK), "U" (URG), "X" (no flags).

              If this option is left unspecified, the ACK bit is set on all probe packets.

       -v, --verbose

              This  option  selects  the  "verbosity"  of  the  tool.  If  this  option  is  left
              unspecified, only minimum information is printed.

       -h, --help

              Print help information for the path6 tool.

EXAMPLES

       The following sections illustrate typical use cases of the path6 tool.

       Example #1

       # scan6 -i eth0 -L -e -v

       Perform host scanning on the local network ("-L"  option)  using  interface  "eth0"  ("-i"
       option).  Use  both  ICMPv6  echo  requests and unrecognized IPv6 options of type 10xxxxxx
       (default). Print link-link layer addresses along with IPv6  addresses  ("-e"  option).  Be
       verbose ("-v" option).

       Example #2

       # scan6 -d 2001:db8::/64 --tgt-virtual-machines all --ipv4-host 10.10.10.0/24

       Scan  for  virtual  machines (both VirtualBox and vmware) in the prefix 2001:db8::/64. The
       additional information about the IPv4 prefix employed by the host system is  leveraged  to
       reduce the search space.

       Example #3

       # scan6 -d 2001:db8::/64 --tgt-ipv4-embedded ipv4-32 --ipv4-host 10.10.10.0/24

       Scan  for  IPv6  addresses  of  the  network  2001:db8::/64  that  embed  the  IPv4 prefix
       10.10.10.0/24 (with the 32-bit encoding).

       Example #4

       # scan6 -d 2001:db8:0-500:0-1000

       Scan for IPv6 addresses of the network 2001:db8::/64, varying the two lowest order  16-bit
       words of the addresses in the range 0-500 and 0-1000, respectively.

       Example #5

       # scan6 -d fc00::/64 --tgt-vendor 'Dell Inc' -p tcp

       Scan  for  network  devices manufactured by 'Dell Inc' in the target prefix fc00::/64. The
       tool will employ TCP segments as the probe packets (rather than the  default  ICMPv6  echo
       requests).

SEE ALSO

       ipv6toolkit.conf(5)

       draft-ietf-opsec-ipv6-host-scanning                     (eal-world>) for a  discussion aof
       <http://tools.ietf.org/html/draft-gont-v6ops-ipv6-ehs-in-
       support of IPv6 packets with extension headers in the IPv6 Internet.

AUTHOR

       The  path6  tool  and  the  corresponding  manual  pages  were  produced  by Fernando Gont
       <fgont@si6networks.com> for SI6 Networks <http://www.si6networks.com>.

COPYRIGHT

       Copyright (c) 2014-2015 Fernando Gont.

       Permission is granted to copy, distribute and/or modify this document under the  terms  of
       the GNU Free Documentation License, Version 1.3 or any later version published by the Free
       Software Foundation; with no Invariant Sections, no Front-Cover Texts, and  no  Back-Cover
       Texts.  A copy of the license is available at <http://www.gnu.org/licenses/fdl.html>.

                                                                                         PATH6(1)