Provided by: pcp_5.3.7-1_amd64 
NAME
pcp-ss - report socket statistics
SYNOPSIS
pcp [pcp options] ss [ss options]
DESCRIPTION
pcp-ss reports socket statistics collected by the pmdasockets(1) PMDA agent. The command
is intended to be reasonably compatible with many of the ss(8) command line options and
reporting formats, but also offer the advantages of local or remote monitoring (in live
mode) and also historical replay from a previously recorded PCP archive. Note that since
ss(1) has many command line options, many of which are the same as standard PCP command
line options as described in PCPIntro(1), the pcp-ss tool should always be invoked by
users using the pcp front-end. This allows standard PCP commandline options such as -h,
-a, -S, -T, -O, -z, etc to be passed without conflict with ss(1) options. See the
EXAMPLES sections below for typical usage and command lines.
Live mode uses the pcp -h host option and requires the pmdasockets(1) PMDA to be installed
and enabled on the target host (local or remote), see pmdasockets(1) for details on how to
enable the sockets PMDA on a particular host. The default source is live metrics
collected on localhost, if neither of the -h or -a options are given.
Historical/archive replay uses the pcp -a archive option, where archive is the basename of
a previously recorded PCP archive. The archive replay feature is particularly useful
because socket statistics can be reported for a designated time using the pcp --origin
option (which defaults to the start time of the archive).
EXAMPLES
pcp ss
Display default basic socket information for the local host. This includes Netid
(tcp, udp, etc), State (ESTAB, TIME_WAIT, etc), Recv-Q and Send-Q queue lengths and
the local and peer address and port for each socket.
pcp -h somehost ss -noemitauO
Display the same basic socket information as above for the host somehost, which may
be the default localhost. The additional command line arguments (-noemitauO) display
one line per socket (-O), numeric (-n) service names (default), timer information
(-o), extended socket details (-e), socket memory usage (-m), internal TCP
information (-i), both udp (-u) and tcp sockets (-t) and both listening and non-
listening sockets (-a).
pcp -a somearchive -S'@Wed 16 Jun 2021 12:57:21' ss -noemitauO
Display the same information as the above example, but for the archive somearchive
starting at the given time Wed 16 Jun 2021 12:57:21. Note the literal @ prefix is
required for an absolute time, see PCPIntro(1) for details. The archive must of
course contain data for the requested time. You can use pmdumplog -l somearchive to
examine the time bounds of somearchive.
pcp -a somearchive -O-0 ss -noemitauO
As above, but with an offset of zero seconds (-O-0) before the current end of
somearchive, i.e. the most recently logged data. Note that somearchive may be
curently growing (i.e. being logged with pmlogger(1)).
OPTIONS
Due to the large number of options supported by pcp-ss, the pcp(1) command should always
be used to invoke pcp-ss in order to specify options such as the metrics source (host or
archive) and also (in archive mode), the requested start time or offset, and timezone
using the following options:
-h, --host
The remote hostname to connect to in live mode.
-a, --archive
The archive file to use for historical sampling
-O, --origin
The time offset to use within an archive (implies -a)
-S, --start
The start time (e.g. in ctime(3) format) to use when replaying an archive.
-Z, --timezone
Use a specific timezone. Since pcp-ss doesn't report timestamps, this only affects
the interpretation of an absolute starting time (-S) or offset (-O).
-z, --hostzone
In archive mode, use the timezone of the archive rather than the timezone on the
local machine running pcp-ss. The timezone, start and finish times of the archive
may be examined using pmdumplog(1) with the -L option.
The above pcp options become indirectly available to the pcp-ss command via environment
variables - refer to PCPIntro(1) for a complete description of these options.
The additional command line options available for pcp-ss itself are:
-h, --help
show help message and exit
-V, --version
output version information
-n, --numeric
don't resolve service names
-r, --resolve
resolve host names
-a, --all
display all sockets
-l, --listening
display listening sockets
-o, --options
show timer information
-e, --extended
show detailed socket information
-m, --memory
show socket memory usage
-p, --processes
show process using socket
-i, --info
show internal TCP information
-s, --summary
show socket usage summary
-b, --bpf
show bpf filter socket information
-E, --events
continually display sockets as they are destroyed
-Z, --context
display process SELinux security contexts
-z, --contexts
display process and socket SELinux security contexts
-N, --net
switch to the specified network namespace name
-4, --ipv4
display only IP version 4 sockets
-6, --ipv6
display only IP version 6 sockets
-0, --packet
display PACKET sockets
-t, --tcp
display only TCP sockets
-M, --mptcp
display only MPTCP sockets
-S, --sctp
display only SCTP sockets
-u, --udp
display only UDP sockets
-d, --dccp
display only DCCP sockets
-w, --raw
display only RAW sockets
-x, --unix
display only Unix domain sockets
-H, --noheader
Suppress header line
-O, --oneline
socket's data printed on a single line
REPORT
The columns in the pcp-ss report vary according to the command line options and have the
same interpretation as described in ss(8).
One difference with pcp-ss is that the first line in the report begins with '# Timestamp'
followed by the timestamp (in the requested timezone, see -z and -Z above) of the sample
data from the host or archive source. Following the timestamp is the currently active
filter string for the metrics source. In archive mode, the active filter can be changed
dynamically, even whilst the archive is being recorded. This is different to ss(8) where
the filter is optionally specified on the command line of the tool and is always 'live',
i.e. ss(8) does not support retrospective replay. With pcp-ss, the filter is stored in
the back-end PMDA, see pmdasockets(1), in the metric network.persocket.filter. The
default filter is state connected, which can be changed by storing a new string value in
the network.persocket.filter metric using pmstore(1), e.g. pmstore
network.persocket.filter "state established". This will override the persistent default
filter, which is stored in a PMDA configuration file and loaded each time the sockets PMDA
is started. See pmdasockets(1) for further details and see ss(8) for details of the
filter syntax and examples.
PCP ENVIRONMENT
Environment variables with the prefix PCP_ are used to parameterize the file and directory
names used by PCP. On each installation, the file /etc/pcp.conf contains the local values
for these variables. The $PCP_CONF variable may be used to specify an alternative
configuration file, as described in pcp.conf(5).
For environment variables affecting PCP tools, see pmGetOptions(3).
SEE ALSO
PCPIntro(1), pcp(1), pmdasockets(1), pmlogger(1), pcp.conf(5) and ss(8).