Provided by: plc-utils-extra_0.0.6+git20211210.358dfcf-2_amd64 
NAME
pev - Qualcomm Atheros Plug-in Electric Vehicle Emulator
SYNOPSIS
pev [options]
DESCRIPTION
Emulate the PEV part of the HomePlug AV Signal Level Attentuation Characterization (SLAC)
protocol where a PEV is a "Plug-in Electric Vehicle" and an EVSE is an "Electric Vehicle
Supply Equipment" or charging station. This program will remain active until it detects
and connects to an available EVSE-HLE on the powerline network. Once connected, it
charges a virtual vehicle for about 10 seconds then disconnects and terminates. See the
HomePlug Green PHY Specification Release Version 1.1 for more information on this
protocol.
Signal Level Attenuation Characterization (SLAC) enables a station to measure the signal
level of its transmission at other stations in the network. It is designed for automotive
applications where there are multiple plug-in vehicle (PEVs) and electric vehicle supply
equipment (EVSE) on the network. The PEV signal level is measured at multiple EVSEs to
determine which EVSE the PEV is actually plugged into. The process leading to this
determination is called "Green PHY PEV-EVSE Association" (GreenPPEA).
This program is part of the Qualcomm Atheros Powerline Toolkit. See the plc man page for
an overview and installation instructions.
OPTIONS
-c Print the PEV-HLE configuration profile on stdout. The configuration profile
specifies program defaults in a format that you, as a user, can edit and save. Use
options -p and -s to read named profiles and sections.
-C Compare confirmation counter and warn (or exit - if -x is givenv) if a mismatch is
detected.
-d Print the contents of the PEV-HLE session variable on stdout. The session variable
is an program data structure that stores information passed between the PEV-HLE and
EVSE-HLE during SLAC association. This option is used to inspect and veriify
information relevant to the process.
If the program was compiled with variable SLAC_DEBUG defined then this option also
prints MME message fields before messages are sent or after they are received.
Interested parties can follow along in the source code.
-i Select the host Ethernet interface. All requests are sent via this host interface
and only reponses received via this host interface are recognized. The default
interface is eth1 because most people use eth0 as their principle network
connection; however, if environment string "PLC" is defined then it takes
precedence over the default interface. This option then takes precedence over
either default.
-K Skip the step which sets the Network Membership Key and focus on sounding only.
-l Normally, this tool exits after one run. Use this parameter to loop indefinitely.
Note, that this parameter has inverse logic compared to evse tool.
-p profile
The PEV-HLE configuration profile name. The program will supply default values for
missing profile elements. See the example profile shown below. The default
profile name is "pev.ini".
-q Enter quiet mode. Progress messages are suppressed.
-s section
The configuration profile section name. The program will supply default values for
missing configuration profile elements. See the example profile shown below. The
default section name is "default".
-v Enter verbose mode. All Ethernet frames sent or received by the program are
displayed on stdout.
-x Exit on error.
-?, --help
Print program help summary on stdout. This option takes precedence over other
options on the command line.
-!, --version
Print program version information on stdout. This option takes precedence over
other options on the command line. Use this option when sending screen dumps to
Atheros Technical Support so that they know exactly which version of the Linux
Toolkit you are using.
PROFILES
The default configuration profile for this program is "pev.ini". The default profile
section is "default". Users may create additional profiles and reference them with option
-p or add additional sections to an existing profiles and reference them with option -s.
Attenuation Theshold
The average attenuation above which the PEV will not connect to an EVSE. The
default value is 10db.
MSound Pause
The time in milliseconds between each MSound sent by the PEV-HLE to the EVSE-HLE.
Sending MSounds too frequently overloads the EVSE-PLC. Sending them too
infrequently wastes time. This value is derived and does not appear in the HPGP
specification. The default pause is 10 milliseconds.
Vehicle Identifier
Vehicle identification. The 17-byte Vehicle Identification Number to be placed in
CM_MNBC_SOUND.IND.SenderID. This value is not used but is can be changed here so
that the field is easy to spot within network message traces.
Network Membership Key
The 16-byte Network Memberhip Key (NMK) for the PEV-PLC device. This program uses
CM_SET_KEY to sets the PEV-PLC NMK to this value after disconnecting. The default
value is the key for Network Password "HomePlugAV".
Network Identifier
The 7-byte Network Identifier (NID) for the PEV-PLC device. This program uses
CM_SET_KEY to sets the PEV-PLC NID to this value after disconnecting. The default
value is the same as that for Network Password "HomePlugAV".
REFERENCES
See the Qualcomm Atheros AR7420, QCA6410 IEEE 1901, HomePlug AV and QCA7000 HomePlug Green
PHY PLC Chipset Programmer's Guide or the HomePlug Green PHY Specification Release Version
1.1 for more information on this protocol.
EXAMPLES
The following example starts a PEV session on interface eth0 and wait up to 2000
milliseconds (or 2 seconds) for the EVSE to respond during any given exchange.
# pev -ieth0 -w2000
The default PEV-HLE configuration profile, "pev.ini", looks something like this but it can
be changed using a normal text editor. Use option -P to produce a template profile, if
one is needed.
# file: pev.ini
# ========================================================
# PEV-HLE initialization;
# --------------------------------------------------------
[default]
attenuation threshold = 10
msound pause = 10
vehicle identifier = AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
network membership key = 50D3E4933F855B7040784DF815AA8DB7
network identifier = B0F2E695666B03
SEE ALSO
plc(1), evse(1)
CREDITS
Charles Maier