Provided by: photopc_3.07-2_amd64 bug

NAME

       photopc - utility to control digital cameras based on Sierra Imaging firmware

SYNOPSIS

       photopc  [-h] [-V] [-v[v]] [-q] [-z] [-t] [-f timeformat] [-s <speed>] [-S <pseudo-speed>]
       [-l <device>] [command [params] ] ...

DESCRIPTION

       This is a command line tool to manipulate digital still cameras that use  certain  control
       protocol,  namely  Agfa  ePhoto  line,  Epson PhotoPC line, Olympus D-xxxL line, Sanyo and
       Nikon (at least CoolPix 9xx) cameras.  It can set camera parameters,  download  and  erase
       pictures,  e.t.c.   It was originally developed for Epson PhotoPC 500, now the author uses
       it with Olympus D-600L, results with other models may vary.

OPTIONS

       -h   This option produces a help screen of all options and commands.

       -V   This option prints software revision information.

       -v   This option enables verbose output. Using two  -v  options  increases  the  level  of
            verbosity. This is primarily meant for debugging.

       -q   This  option  sets quiet mode.  If it is not specified, the program will show running
            download progress indicator.

       -z   This option sets no time-zone processing mode.  Use this option if the camera's clock
            is (should be) set up shifted by the local timezone offset.

       -s speed
            This  option permits setting the data rate to use when communicating with the camera.
            Valid rates are 9600, 19200, 38400, 57600 and 115200 (the default).

       -S speed
            On some UNIX systems with some serial hardware/driver combinations you need to  "lie"
            to  the  driver  about  the  communication  speed that you want to use at startup and
            during the session.  Physical startup speed is always 19200.  E.g., if on your system
            speeds up to 19200 are translated one to one, but in order to use 57600 baud you have
            to specify 50 baud, and you want to run at 57600,  you'll  need  to  specify  photopc
            -s57600 -S19200,50 <commands ...>

            Another  example:  if  your  driver will use physical speed four times as high as you
            told it to set, and you want to run at default 115200 physical speed, specify photopc
            -S4800,28800 <commands ...>

       -t   Set timestamp of generated files to the time of snapshot.

       -f timeformat
            This  option  permits  specifying  the  format for automatically generated image file
            names; the value is used as the format string for strftime(3) function.  By  default,
            names  of  the format "MMDD_NNN.jpg" are generated, where MM is a month, DD is a day,
            and NNN is a count starting from 001.  A good starting point for the timeformat value
            could  be  "%Y_%m_%d-%H_%M_%S.jpg".   If  the format string contains context "%%XXXd"
            where XXX are digits, it is taken for the count, i.e. if the file with such  name  is
            present,  next  count is tried.  If the format string does not contain "%%XXXd" part,
            the count field, if necessary, is appended at the end of the name.

            A few single-character formats are used as shortcuts.  "x" makes the name of  seconds
            since  the  epoch  in  hexadecimal  format (8 characters + ".jpg"), "d" - the same in
            decimal format (10 characters), "1" stands for default format  "%m%d_%%03d.jpg",  "2"
            stands for "%y%m%d%%02d.jpg", "3" stands for "%Y_%m_%d-%H_%M_%S.jpg" and 4 stands for
            "%Y/%m/%d/%H_%M_%S.jpg".  The program attempts to create intermediate directories  if
            necessary (and possible).

       -l device
            This  allows  specifying  the serial device to use for communicating with the camera.
            The default is /dev/photopc (which is typically created as a (symbolic) link  to  the
            real  device,  e.g. /dev/ttyS0) in UNIX, and COM1: in DOS and Windows.  Note that the
            program does not use UUCP style locks so  you  need  to  be  certain  that  no  other
            program,  such  as  uugetty,  uucico  or  mouse manager, is trying to access the same
            device.  Another note: on some systems (notably Linux)  terminal  settings  are  kept
            across usage of the serial port by different programs.  photopc may have troubles if,
            say, hardware flow control was kept turned on.  Try "stty -F /dev/ttyXX sane" if  you
            suspect that you are bitten by this.

COMMANDS

       After the options, one or more commands can be given in the command line.

       Some  commands  accept frame-list as a parameter.  Frame list is a comma-separated list of
       tokens (no whitespace allowed), each of the tokens being a word all, or a  single  number,
       or  two  numbers  separated  by a dash (-), or a number followed by a dash and a word last
       (without whitespace).

       query
            Display all current camera settings.

       count
            Output the number of pictures stored in the camera.  This  is  intended  for  use  in
            shell scripts.

       list List  information  about  frames  stored  in the camera.  Fields displayed are: frame
            number, size of image file, protection state, resolution mode, timestamp and filename
            if available.  Faster than llist but may not work with some (older) models.

            WARNING: this command changes current directory on models that support directory tree
            on the flash media.

       llist
            List more information about frames stored in the camera.  Fields displayed are: frame
            number,  protection  state,  size  of image file, resolution mode, flash, shutter and
            timestamp.  Slower than list and does not work with models that use Exif file format.

            WARNING: this command changes current directory on models that support directory tree
            on the flash media.

       cd <path>
            On  the  models  that support multiple directories on the flash media, change current
            directory as specified.

            The program chdir's to the first non-empty folder at the beginning.  So,  your  first
            cd  command  must specify full path starting with a slash. If it where unix you could
            also cd ../something but here we do not have a way to move up one level.

       protect <frame-list> On | Off
            Change "protected" status of frames. Frame numbering starts at 1.  The  command  will
            fail  if the frame number is omitted, not numeric, or does not correspond to a stored
            frame.  "Protected" frames cannot be erased with "erase" and "eraseall"  commands  or
            with the "erase" button on the camera.

       erase <frame-list>
            Erase  frames. Frame numbering starts at 1. The command will fail if the frame number
            is omitted, not numeric, or does not correspond to a stored frame.

            To avoid unexpected results, list of frames specified for this command is sorted  and
            processed in reverse order.

       eraseall
            Erase all stored frames.

       eraselast
            Erase most recently taken frame.

       snapshot
            Take a picture.

       off  Switch  off  the  camera.   This command only has this effect on some models (notably
            Olympus D-600L).  On  other  models,  it  just  terminates  the  session  immediately
            (otherwise  the  camera  would be active several seconds after the last command).  On
            models with big timeout, such as Photopc 600, it may be wise to always issue "off" at
            the end of command row, to decrease power consumption.

            All commands going after "off" are ignored.

       image <frame-list> <file-or-dir-name>
            Download  an  image  or  series of images from the camera to disk file(s) on the host
            computer.  Frame numbering starts at 1. The command will fail if the frame number  is
            omitted,  not numeric, or does not correspond to a stored frame.  Files are stored in
            JPEG (JFIF or Exif) format.  Image file also contains a thumbnail portion, and set of
            parameters  like  the  shutter speed, date and time, I.D. string and more.  Directory
            must be specified if frame list  is  requested.   If  directory  name  is  specified,
            downloaded  file(s)  will  get unique names starting with month and date of snapshot,
            unless -f option is used, in which case unique names according to -f option setting.

       thumbnail <frame-list> <file-or-dir-name>
            Download a thumbnail image or series of thumbnails from the camera to disk file(s) on
            the  host  computer.  Frame numbering starts at 1. The command will fail if the frame
            number is omitted, not numeric, or does not correspond to a stored frame.  Files  are
            stored  in  JPEG  (JFIF  or  Exif) format.  If the camera does not keep files in EXIF
            format, then the thumbnail file also contains a set of parameters  like  the  shutter
            speed,  date  and  time, I.D.  string and more.  Directory must be specified if frame
            list is requested.  If directory name  is  specified,  downloaded  file(s)  will  get
            unique names according to -f option setting.

       audio <frame-list> <file-or-dir-name>
            Download  an  audio notice file or series of files from the camera to disk file(s) on
            the host computer. Frame numbering starts at 1. The command will fail  if  the  frame
            number  is  omitted, not numeric, or does not correspond to a stored frame. Files are
            stored with ".wav" extension but the format is not RIFF WAV format.  It is compressed
            in  some way, probably with some variation of ADPCM.  The program stores the raw data
            as provided by the camera, it is not playable as a normal .wav file.  Directory  must
            be  specified if frame list is requested.  If directory name is specified, downloaded
            file(s) will get unique names according to -f option setting.

       preview <file-name>
            take a `preview' snapshot and save image as a <file-name>.  File is in JPEG (JFIF  or
            Exif)  format,  and  does  not  contain  any  additional  data,  just plain (very low
            resolution) image.

       upload <file-name>
            Upload image file into the camera.  This command is not enabled in LOWMEMORY  version
            (i.e. under MS/DOS).

            WARNING!  You cannot upload arbitrary JPEG file.  Depending on the camera model, such
            attempt may result in the image not uploaded, not viewable, or even the camera "hung"
            needing  to  remove  the batteries to make it work again.  File previously downloaded
            from the same camera model is always uploadable.  Otherwise, your  milage  may  vary.
            photopc  program  does  not perform any checks, so it's up to the user to provide the
            file in proper format.

       mode Record | Play | Thumbnail
            Set specified operation mode on certain models.

       resolution Hi | Lo | Ext | <number>
            Set the camera to high, low or extended resolution mode.  Exact meaning of the  modes
            is model-dependant and may specify different image dimensions and/or JPEG compression
            rate.

       clock
            Set the camera's internal real-time clock using the current date and  time  from  the
            host computer.  Time of taking a snapshot is included inside the JPEG files produced.
            Note that the models which display the time on the LCD will then display  GMT  rather
            than local time.  With -z option, time shifted by the timezone offset is set, and the
            LCD will display local time.  Using unshifted (GMT) time in the camera seems a proper
            way to go.

       shutter <speed>
            Set  the  camera  shutter  speed.   Units  can  be  specified  in  microseconds or in
            traditional form like "1/250".  Valid interval depends on  the  model.   If  a  value
            outside  the  interval  is  specified,  the  camera will set the speed to the nearest
            margin of the valid interval.  Special speed value auto will set  automatic  shutter.
            Note  that  this  only  works  while  the  camera  is  connected  to  the  host,  and
            automatically turns the flash off.  While disconnected, shutter speed is  always  set
            automatically.

       aperture Auto | Lo | Med | Hi
            Set the lense aperture on models that support it.

       flash Auto | Force | Off | AntiRedeye | SlowSync
            Set the camera flash mode.

       id <string>
            Set  the  camera  identifier  string that is included inside the JPEG files produced.
            Only few models support this.

       autoshut-host <seconds>
            Automatically shut off the  camera  after  that  many  seconds  of  inactivity  while
            connected to the computer (on the host).

       autoshut-field <seconds>
            Automatically  shut  off  the  camera  after  that  many  seconds of inactivity while
            disconnected from the computer (in the field).

       lcd-autoshut <seconds>
            Automatically shut off the LCD monitor after that many seconds of inactivity.

       lcd-brightness <value>
            Set LCD brightness to the value (valid values are 1 to 7).

       focus Macro | Normal | Infinity
            Set the lens focusing mode.  As far as I can tell, on fixed focus models  macro  only
            means  force  minimum  aperture, not change the focal length.  Only has effect in the
            same invocation with "snapshot" command.

       adjust Normal | Contrast+ | Contrast- | Brightness+ | Brightness-
            Set adjustment of picture brightness/contrast.

       metering Center-weighted | Spot | Matrix
            Set auto exposure metering mode.

       whitebalance Normal | Sunny | Incandescent | Fluorescent | Flash | Preset | Cloudy
            Set white balance.

       color On | Off
            Set color or B/W mode.

       dzoom On | Off | <number>
            Set digital zoom on or off.  Note that it may only work if  low  resolution  was  set
            prior  to  turning  on digital zoom, and only have effect in the same invocation with
            "snapshot" command.  Numeric values have model-dependant meaning.

       zoom <mm>
            Set optical zoom value on models that support it.

EXAMPLES

       % photopc query

       % photopc -f "image%H:%M:%S" eraseall snapshot image 1 .

OTHER NOTES

       The latest version of this tool can be found at http://photopc.sourceforge.net/

       Trademarks are properties of their respective owners.

KNOWN BUGS

       On some models, powersaving timeouts are measured not in seconds but in  1/10  sec  units.
       The program reports them as in seconds.

       Llist  command  relies  on  the  format of thumbnail image that does not contain necessary
       information on some models (e.g. Nikon CP 900), this  command  does  not  work  for  these
       models.   List  command, on the contrary, do not display useful data on models that do not
       return it in the register 47 (e.g. Agfa 780).

       The program is known to have some timing problems talking to Nikon CP900 when  the  camera
       is "napping" in powersaving mode.  Until the problem is solved, a workaround is to run the
       program this way:

       $ photopc && photopc <command list>

       Nikon seem to have  some  other  problems  too,  especially  when  doing  "actions"  (e.g.
       snapshots, erase).

       Another Nikon problem: if 32Mb (or bigger?) memry card is inserted, the program cannot get
       the number of frames taken, and if "all" or "NN-last" range is specified for  downloading,
       the  program  fails.   Specify  explicit  range of frames.  Also, with any card, number of
       frames taken is not updated immediately after the "snapshot" command (the  same  has  been
       reported  for other models).  If you find how to find the correct number of frames, please
       let me know.

COPYRIGHT

       The  program  is  copyrighted  by  Eugene  G.  Crosser  <crosser@average.org>  and  freely
       distributable.   See README file for detailes.  DOS and Windows support copyright Bruce D.
       Lightner <lightner@lightner.net>

CREDITS

       The man page was originally written by Jeff  Tranter  <jeff_tranter@pobox.com>,  who  also
       contributed a few bugfixes.  Some information about the serial protocol obtained from Jun-
       ichiro "itojun" Itoh <itojun@itojun.org>, Thierry Bousch <bousch%linotte.uucp@topo.math.u-
       psud.fr> and other contributors.

SEE ALSO

       epinfo(1), strftime(3), protocol description (protocol.htm in the source distribution).