Provided by: mjpegtools_2.1.0+debian-7_amd64 bug

NAME

       pnmtoy4m - Convert PNM/PAM images to YUV4MPEG2 stream

SYNOPSIS

       pnmtoy4m [options] [ filename ]

DESCRIPTION

       pnmtoy4m  converts  one  or  more raw PPM, PGM, PBM, or PAM images into a YUV4MPEG2 stream
       ready for further processing by other video tools.  These three (or  four)  image  formats
       are collectively referred to as "PNM images".

       Output  is  to  stdout  to facilitate piping to other MJPEG tools.  The size of the output
       frame(s) is determined from the (first) input image.

       Input is a 'raw' format PNM image, read from stdin or from  the  optional  filename.   The
       input  may  contain  multiple  PNM  images  concatenated  together; pnmtoy4m will read and
       process them sequentially.  All images must have identical size and format.  Input  images
       can  be  interpreted  as  whole  progressive  frames,  pairs  of interleaved fields, or as
       sequential fields (read in  pairs  of  images)  to  be  output  as  either  interlaced  or
       progressive  frames.   PPM and PGM images must have 8 bits per channel (i.e. 'maxval' must
       be 255).

       PPM input images should be in the usual R'G'B' colorspace.   They  are  converted  to  the
       Y'CbCr  colorspace  (ITU-R  BT.601)  before  being  output  to  a "4:4:4" (non-subsampled)
       YUV4MPEG2 stream.  If chroma subsampling is required (e.g. to 4:2:0 for MPEG), the  output
       should be further piped through a program such as y4mscaler.

       PGM  images  should be in the standard full-range ([0,255]) grayscale colorspace.  PGM and
       PBM images will be converted to BT.601 luma and output  as  "MONO"  (luma-only)  YUV4MPEG2
       streams.

       The PAM format is a newer superset of the PNM formats; the precise contents of a PAM image
       is defined by the TUPLTYPE header tag.  pnmtoy4m  handles  TUPLTYPE  "GRAYSCALE"  as  PGM,
       "RGB"  as  PPM, and "RGB_ALPHA" as PPM with an 8-bit alpha channel.  (The alpha channel is
       converted to BT.601 luma as is appropriate for YUV4MPEG2 streams.)

       pnmtoy4m and y4mtopnm are inverses of each other; you can pipe the output of one into  the
       other,  and vice-versa.  Note that the colorspace operations are lossy in both directions.
       And, when converting to PNM, information on interlacing and sample aspect  ratio  is  lost
       (but can be reconstructed by supplying command-line arguments to pnmtoy4m).

OPTIONS

       pnmtoy4m accepts the following options:

       -o num
            Frame offset:  skip output of the first 'num' frames.  (default: 0)

       -n num
            Output a total of 'num' output frames.  Use '0' to specify all frames.  (default: 0)

       -B   Interpret data as being  BGR rather than RGB.

       -r   Repeat  last input frame until output is complete.  If '-n 0' is also specified, last
            input frame will be repeated forever.

       -D x Treat each PNM image as a single (de-interleaved) field instead of a full frame.  The
            argument specifies the interpretation:
             t - the first image is a top-field
             b - the first image is a bottom-field

            With  this  option,  two input images will be required per output frame.  Be careful:
            mismatched "-I" and "-D" options can invert the temporal  or  spatial  order  of  the
            fields (or both).

       -F n:d
            Set  framerate  encoded  in  output  stream,  as  an  exact integer ratio.  (default:
            30000:1001)  Common rates are:
             24000:1001 - NTSC 3:2 pulldown converted film
                   24:1 - native film
                   25:1 - PAL/SECAM
             30000:1001 - NTSC video
                   50:1 - PAL field rate
             60000:1001 - NTSC field rate

       -A n:d
            Set pixel aspect  ratio  encoded  in  output  stream,  as  an  exact  integer  ratio.
            (default:  1:1)  Common ratios are:
                 1:1  - square pixels (computer graphics)
                10:11 - CCIR-601 NTSC
                59:54 - CCIR-601 PAL

       -I x Set  the output interlacing mode, encoded in the output stream.  (Default is to match
            "-D" if given, or 'p' if not.)
             p - progressive, non-interlaced
             t - top/upper-field-first interlaced
             b - bottom/lower-field-first interlaced

       -v [0,1,2]
            Set verbosity level.
             0 = warnings and errors only.
             1 = add informative messages, too.
             2 = add chatty debugging message, too.

EXAMPLES

       To convert a file containing a single PPM file into a stream of 15 (identical) frames:

            pnmtoy4m -n 15 -r some-image.ppm

       To convert a series of Targa format images (in  the  current  directory)  to  a  YUV4MPEG2
       stream displayed by yuvplay:

            ls *.tga | xargs -n1 tgatoppm | pnmtoy4m | yuvplay

AUTHOR

       This manual page was written by Matt Marjanovic.
       If  you  have questions, remarks, problems or you just want to contact the developers, the
       main mailing list for the MJPEG-tools is:
         mjpeg-users@lists.sourceforge.net

       For more info, see our website at
              http://mjpeg.sourceforge.net/

SEE ALSO

       pam(5),  pbm(5),  pgm(5),  pnm(5),  ppm(5),   y4mtopnm(1),   mjpegtools(1),   mpeg2enc(1),
       y4mscaler(1), yuv2lav(1), yuvplay(1)