Provided by: putty-tools_0.77-1_amd64 
NAME
psusan - pseudo-SSH for untappable, separately authenticated networks
SYNOPSIS
psusan [ options ]
DESCRIPTION
psusan is a server program that behaves like the innermost `connection' layer of an SSH
session, without the two outer security layers of encryption and authentication. It
provides all the post-authentication features of an SSH connection:
• choosing whether to run an interactive terminal session or a single specified
command
• multiple terminal sessions at once (or a mixture of those and specified commands)
• SFTP file transfer
• all the standard SSH port-forwarding options
• X11 forwarding
• SSH agent forwarding
The catch is that, because it lacks the outer layers of SSH, you have to run it over some
kind of data channel that is already authenticated as the right user, and that is already
protected to your satisfaction against eavesdropping and session hijacking. A good rule of
thumb is that any channel that you were prepared to run a bare shell session over, you can
run psusan over instead, which adds all the above conveniences without changing the
security properties.
The protocol that psusan speaks is also spoken by PuTTY, Plink, PSCP, and PSFTP, if you
select the protocol type `Bare ssh-connection' or the command-line option -ssh-connection
and specify the absolute path to the appropriate Unix-domain socket in place of a
hostname.
EXAMPLES
The idea of a secure, pre-authenticated data channel seems strange to people thinking
about network connections. But there are lots of examples within the context of a single
Unix system, and that's where psusan is typically useful.
Docker
A good example is the console or standard I/O channel leading into a container or
virtualisation system. Docker is a familiar example. If you want to start a Docker
container and run a shell directly within it, you might say something like
docker run -i -t some:image
which will allow you to run a single shell session inside the container, in the same
terminal you started Docker from.
Suppose that you'd prefer to run multiple shell sessions in the same container at once
(perhaps so that one of them can use debugging tools to poke at what another is doing).
And perhaps inside that container you're going to run a program that you don't trust with
full access to your network, but are prepared to let it make one or two specific network
connections of the kind you could set up with an SSH port forwarding.
In that case, you could remove the -t option from that Docker command line (which means
`allocate a terminal device'), and tell it to run psusan inside the container:
docker run -i some:image /some/path/to/psusan
(Of course, you'll need to ensure that psusan is installed somewhere inside the container
image.)
If you do that from a shell command line, you'll see a banner line looking something like
this:
SSHCONNECTION@putty.projects.tartarus.org-2.0-PSUSAN_Release_0.75
which isn't particularly helpful except that it tells you that psusan has started up
successfully.
To talk to this server usefully, you can set up a PuTTY saved session as follows:
• Set the protocol to `Bare ssh-connection' (the psusan protocol).
• Write something in the hostname box. It will appear in PuTTY's window title (if you
run GUI PuTTY), so you might want to write something that will remind you what kind
of window it is. If you have no opinion, something generic like `dummy' will do.
• In the `Proxy' configuration panel, set the proxy type to `Local', and enter the
above `docker run' command in the `Telnet command, or local proxy command' edit
box.
• In the `SSH' configuration panel, you will very likely want to turn on connection
sharing. (See below.)
This arranges that when PuTTY starts up, it will run the Docker command as shown above in
place of making a network connection, and talk to that command using the psusan SSH-like
protocol.
The effect is that you will still get a shell session in the context of a Docker
container. But this time, it's got all the SSH amenities. If you also turn on connection
sharing in the `SSH' configuration panel, then the `Duplicate Session' option will get you
a second shell in the same Docker container (instead of a primary shell in a separate
instance). You can transfer files in and out of the container while it's running using
PSCP or PSFTP; you can forward network ports, X11 programs, and/or an SSH agent to the
container.
Of course, another way to do all of this would be to run the full SSH protocol over the
same channel. This involves more setup: you have to invent an SSH host key for the
container, accept it in the client, and deal with it being left behind in your client's
host key cache when the container is discarded. And you have to set up some login details
in the container: either configure a password, and type it in the client, or copy in the
public half of some SSH key you already had. And all this inconvenience is unnecessary,
because these are all precautions you need to take when the connection between two systems
is going over a hostile network. In this case, it's only going over a kernel IPC channel
that's guaranteed to go to the right place, so those safety precautions are redundant, and
they only add awkwardness.
User-mode Linux
User-mode Linux is another container type you can talk to in the same way. Here's a small
worked example.
The easiest way to run UML is to use its `hostfs' file system type to give the guest
kernel access to the same virtual filesystem as you have on the host. For example, a
command line like this gets you a shell prompt inside a UML instance sharing your existing
filesystem:
linux mem=512M rootfstype=hostfs rootflags=/ rw init=/bin/bash
If you run this at a command line (assuming you have a UML kernel available on your path
under the name `linux'), then you should see a lot of kernel startup messages, followed by
a shell prompt along the lines of
root@(none):/#
To convert this into a psusan-based UML session, we need to adjust the command line so
that instead of running bash it runs psusan. But running psusan directly isn't quite
enough, because psusan will depend on a small amount of setup, such as having /proc
mounted. So instead, we set the init process to a shell script which will do the necessary
setup and then invoke psusan.
Also, running psusan directly over the UML console device is a bad idea, because then the
psusan binary protocol will be mixed with textual console messages. So a better plan is to
redirect UML's console to the standard error of the linux process, and map its standard
input and output to a serial port. So the replacement UML command line might look
something like this:
linux mem=512M rootfstype=hostfs rootflags=/ rw \
con=fd:2,fd:2 ssl0=fd:0,fd:1 init=/some/path/to/uml-psusan.sh
And the setup script uml-psusan.sh might look like this:
#!/bin/bash
# Set up vital pseudo-filesystems
mount -t proc none /proc
mount -t devpts none /dev/pts
# Redirect I/O to the serial port, but stderr to the console
exec 0<>/dev/ttyS0 1>&0 2>/dev/console
# Set the serial port into raw mode, to run a binary protocol
stty raw -echo
# Choose what shell you want to run inside psusan
export SHELL=/bin/bash
# Set up a default path
export PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin
# And now run psusan over the serial port
exec /home/simon/src/putty/misc/psusan
Now set up a PuTTY saved session as in the Docker example above. Basically you'll want to
use the above linux command as the local proxy command. However, it's worth wrapping it in
setsid(1), because when UML terminates, it kills its entire process group. So it's better
that PuTTY should not be part of that group, and should have the opportunity to shut down
cleanly by itself. So probably you end up setting the proxy command to be something more
like:
setsid linux mem=512M rootfstype=hostfs rootflags=/ rw \
con=fd:2,fd:2 ssl0=fd:0,fd:1 init=/some/path/to/uml-psusan.sh
You may also find that you have to enable the bug workaround that indicates that the
server `Discards data sent before its greeting', because otherwise PuTTY's outgoing
protocol greeting can be accidentally lost during UML startup. (See Debian bug #991958.)
Once you've done that, you'll have a PuTTY session that starts up a clean UML instance
when you run it, and (if you enabled connection sharing) further instances of the same
session will connect to the same instance again.
Windows Subsystem for Linux
On Windows, the default way to use WSL is to run the wsl program, or one of its aliases,
in a Windows console, either by launching it from an existing command prompt, or by using
a shortcut that opens it in a fresh console. This gives you a Linux terminal environment,
but in a Windows console window.
If you'd prefer to interact with the same environment using PuTTY as the terminal (for
example, if you prefer PuTTY's mouse shortcuts for copy and paste), you can set it up by
installing psusan in the Linux environment, and then setting up a PuTTY saved session that
talks to it. A nice way to do this is to use the name of the WSL distribution as the `host
name':
• set the local proxy command to `wsl -d %host /usr/local/bin/psusan' (or wherever
you installed psusan in the Linux system)
• enter the name of a particular WSL distribution in the host name box. (For example,
if you installed WSL Debian in the standard way from the Windows store, this will
just be `Debian'.)
• set the protocol to `Bare ssh-connection', as usual.
Like all the other examples here, this also permits you to forward ports in and out of the
WSL environment (e.g. expose a WSL2 network service through the hypervisor's internal
NAT), forward Pageant into it, and so on.
Cygwin
Another Unix-like environment on Windows is Cygwin. That comes with its own GUI terminal
application, mintty (as it happens, a derivative of PuTTY); but if you'd prefer to use
PuTTY itself to talk to your Cygwin terminal sessions, psusan can help.
To do this, you'll first need to build the Unix PuTTY tools inside Cygwin (via the usual
cmake method). Then, copy the resulting psusan.exe into Cygwin's /bin directory. (It has
to be in that directory for non-Cygwin programs to run it; otherwise it won't be able to
find the Cygwin DLL at startup.)
Then set up your PuTTY saved session like this:
• set the local proxy command to run psusan.exe via its real Windows path. You might
also want to add the --sessiondir option so that shell sessions start up in your
Cygwin home directory. For example, you might use the command
`c:\cygwin64\bin\psusan.exe --sessiondir /home/simon' (changing the pathname and
username to match your setup).
• enter anything you like in the host name box; `Cygwin' is probably a good choice
• set the protocol to `Bare ssh-connection', as usual.
Port forwarding is probably not particularly useful in this case, since Cygwin shares the
same network port space as the host machine. But turning on agent forwarding is useful,
because then the Cygwin command-line SSH client can talk to Pageant without any further
configuration.
schroot
Another example of a container-like environment is the alternative filesystem layout set
up by schroot(1).
schroot is another program that defaults to running an interactive shell session in the
terminal you launched it from. But again, you can get a psusan connection into the schroot
environment by setting up a PuTTY saved session whose local proxy command is along the
lines of
schroot -c chroot-name /some/path/to/psusan
Depending on how much of the chroot environment is copied from your main one, you might
find this makes it easier to (for example) run X11 programs inside the chroot that open
windows on your main X display, or transfer files in and out of the chroot.
Between network namespaces
If you've set up multiple network namespaces on a Linux system, with different TCP/IP
configurations, then psusan can be a convenient unprivileged-user gateway between them, if
you run it as a non-root user in the non-default one of your namespaces, listening for
connections on a Unix-domain socket.
If you do that, then it gives you convenient control over which of your outgoing network
connections use which TCP/IP configuration: you can use PuTTY to run a shell session in
the context of the other namespace if you want to run commands like ping, or you can set
up individual port forwardings or even a SOCKS server so that processes running in one
namespace can send their network connections via the other one.
For this application, it's probably most convenient to use the --listen option in psusan,
which makes it run as a server and listen for connections on a Unix-domain socket. Then
you can enter that socket name in PuTTY's host name configuration field (and also still
select the `Bare ssh-connection' protocol option), to connect to that socket as if it were
an SSH client.
Provided the Unix-domain socket is inside a directory that only the right user has access
to, this will ensure that authentication is done implicitly by the Linux kernel.
Between user ids, via GNU userv
If you use multiple user ids on the same machine, say for purposes of privilege separation
(running some less-trusted program with limited abilities to access all your stuff), then
you probably have a `default' or most privileged account where you run your main login
session, and sometimes need to run a shell in another account.
psusan can be used as an access channel between the accounts, using GNU userv(1) as the
transport. In the account you want to access, write a userv configuration stanza along the
lines of
if (glob service psusan & glob calling-user my-main-account-name)
reset
execute /some/path/to/psusan
fi
This gives your main account the right to run the command
userv my-sub-account-name psusan
and you can configure that command name as a PuTTY local proxy command, in the same way as
most of the previous examples.
Of course, there are plenty of ways already to access one local account from another, such
as sudo. One advantage of doing it this way is that you don't need the system
administrator to intervene when you want to change the access controls (e.g. change which
of your accounts have access to another): as long as you have some means of getting into
each account in the first place, and userv is installed, you can make further
configuration changes without having to bother root about it.
Another advantage is that it might make file transfer between the accounts easier. If
you're the kind of person who keeps your home directories private, then it's awkward to
copy a file from one of your accounts to another just by using the cp command, because
there's nowhere convenient that you can leave it in one account where the other one can
read it. But with psusan over userv, you don't need any shared piece of filesystem: you
can scp files back and forth without any difficulty.
OPTIONS
The command-line options supported by psusan are:
--listen unix-socket-name
Run psusan in listening mode. unix-socket-name is the pathname of a Unix-domain
socket to listen on. You should ensure that this pathname is inside a directory
whose read and exec permissions are restricted to only the user(s) you want to be
able to access the environment that psusan is running in.
The listening socket has to be a Unix-domain socket. psusan does not provide an
option to run over TCP/IP, because the unauthenticated nature of the protocol would
make it inherently insecure.
--listen-once
In listening mode, this option causes psusan to listen for only one connection, and
exit immediately after that connection terminates.
--sessiondir pathname
This option sets the directory that shell sessions and subprocesses will start in.
By default it is psusan's own working directory, but in some situations it's easier
to change it with a command-line option than by wrapping psusan in a script that
changes directory before starting it.
-v, --verbose
This option causes psusan to print verbose log messages on its standard error. This
is probably most useful in listening mode.
-sshlog logfile
-sshrawlog logfile
These options cause psusan to log protocol details to a file, similarly to the
logging options in PuTTY and Plink.
-sshlog logs decoded SSH packets and other events (those that -v would print).
-sshrawlog additionally logs the raw wire data, including the outer packet format
and the initial greetings.