NAME

       repotool - operate on a CVS, SVN, git, bzr, hg, or darcs repository in a uniform way

SYNOPSIS

       repotool 'command' [-d | -q | -v] [args...]

DESCRIPTION

       repotool is a wrapper around repository operations that differ by version-control system.
       It is little use by itself, existing mainly to generate and simplify a conversion makefile
       usable with reposurgeon(1).

       Not all actions are supported on all systems. You will get an error message and a return
       value of 1 when attempting an unsupported action.

       With the -v option, report the commands executed just before they are run. With the -q
       option, only fatal errors are printed instead of non-fatal gripes. The -q and -v options
       also disable each other and only the last one will take effect.

       With the -d option, change to a specified directory before performing whatever operation
       was selected. If the directory doesn’t exist or can’t be searched into, that’s a fatal
       error.

       The "initialize" option takes a project name (and, optionally, following source and target
       VCS types) and generates a Makefile that will sequence various steps of a repository
       conversion. It also generates stub lift and options files. This is meant to be run in an
       empty work directory, the tool will refuse to step on any of these files that already
       exist. Afterwards, you will need to set some variables in the Makefile; read its header
       comment.

       The 'export' action, run from within a repository directory, dumps a copy of a CVS,
       Subversion, git, bzr, hg, or darcs repository to a flat history file readable by
       reposurgeon. The format is usually a git-fast-import stream, except that Subversion
       repositories export as Subversion dump files; the point is to be a lossless
       representation, or as close to one as possible.

       The 'tags' option, run from within a repository directory, returns a list of the
       repository’s release tags.

       The 'branches' option, run from within a repository directory , returns a list of the
       repository’s branch names.

       The 'checkout' option checks out a working copy of the repository. It must be called from
       within the repository. It takes one required argument - the checkout directory location.

       The checkout option may take a revision, tag, or branch specification, given with the -r,
       -t, or -b options. If you specify multiple conflicting specifications, the revision takes
       precedence, then the tag, then the branch. If the spec is omitted, the tip of the main
       line of the repository will be used; this is equivalent to specifying branch 'master' (git
       terminology, which is translated by reposurgeon to 'trunk' or whatever the underlying VCS
       uses). In VCSs like SVN where branches and tags are not part of the history model, it is
       possible to specify both a revision and a branch or tag specification to get the contents
       of the branch or tag as seen from the given revision. With these VCS types, you can also
       use the -n (nobranch) option to checkout the complete repository instead, where all
       branches and tags are simply subdirectories. You can also use the -a (accept-missing)
       option to let 'repotool checkout' return a dangling symlink instead of stopping its
       execution when the asked branch or tag has not been found in the SVN namespace (this is
       currently the default for SVN repositories that are yet checked out). With most DVCS
       checkouts, the -r, -t, and -b options are essentially synonyms. If given a -d option,
       checkout is performed from the directory specified; this may be convenient when working
       with CVS or Subversion in order to select the repository directory.

       The 'compare' action takes two repository directories. It may optionally take a
       tag-branch-revision spec as for the checkout option. You can also pass two revisions
       separated by a colon to the -r option, to have the first one checked out in the first
       repository and the second one in the second repository. That permits one to compare two
       different revisions, or the same revision referenced differently in two VCS. You can leave
       one of the two revisions empty, then the -r option will not be passed to the corresponding
       repository checkout. This is useful to compare a git tag or branch to the corresponding
       tag or branch in SVN as seen at a particular revision (specifying both a branch and
       revision makes sense in SVN, but not in git). The selected versions are compared with diff
       -r, with noise due to SCCS/RCS/CVS keyword expansion ignored. File permissions well as
       content are checked, any mismatches will be shown after the diff listing.

       The compare operation accepts the following options:

       -n
           Passed to the individual checkout commands which means that in cases where it makes
           sense the complete repository will be checked out flatly, treating branch and tag
           namespaces as simple directories.

       -a
           Use an empty directory as the checkout if the asked branch or tag cannot be found,
           instead of erroring out without any comparison. This is useful when if the other
           repository uses empty content for deleted refs.

       -u
           Emit unified diff (default).

       -c
           Emit context diff.

       -q
           Suppress nonfatal errors and progress spinners.

       -s
           List matching files.

       -i
           Perform comparison of normally ignored dot directories

       The 'compare-tags' action takes two repository directories, extracts a list of tags from
       the first, then compares the repository contents at each tag in the list, generating a
       compare report for each. Takes compare options. Additionally the -e option sets exclude
       patterns for tag names that should be ignored.

       The 'compare-branches' action takes two repository directories, extracts a list of
       branches common to both, then compares the repository contents at each branch in the list,
       generating a compare report for each. Takes compare options. Additionally the -e option
       sets exclude patterns for branch names that should be ignored.

       The 'compare-all' action takes two repository directories, and runs all three above
       compare actions on them. Even if the same name is a tag in one repository and a branch in
       the other, it will compare them against each other. Not distinguishing them is useful as
       CVS tags that are not applied to every file in the repository may get converted to
       branches. Takes compare options. Additionally the -e option sets exclude patterns for tag
       and branch names that should be ignored.

       The 'mirror' action makes or updates a local mirror of a Subversion, CVS, git, or hg repo.
       It requires a single argument, either a repository URL or the name of a local mirror
       directory created by a previous run. The first form creates a local mirror of the
       repository in a directory named after the last segment of the URL, with the suffix
       "-mirror" (the local mirror name can be overridden by an optional second argument). The
       second form updates the local mirror, doing an incremental fetch; just give the mirror
       directory name. If the environment variables RUSERNAME and RPASSWORD are set, they are
       used as login/password credentials for Subversion mirroring.

       Subversion URLs are as specified in the public documentation for Subversion. CVS URLs must
       specify a host and repository path, followed by a '#', followed by a module name. URLs for
       git and hg should be in the form normally used for clone commands. Alternatively, a
       repository URL may be a "file://" URL, in which case the repository type is autodetected
       from the contents of the indicated directory. Note: A Subversion file URL has three
       slashes after the "file:" prefix!

       The mirror command can also be passed an rsync URL. This will usually be faster than
       mirroring through an equivalent Subversion URL.

       The "version" command reports the version level of the software.

       The "help" command displays a summary of commands and options.

ENVIRONMENT VARIABLES

       This program uses the $TMPDIR environment variable, defaulting to '/tmp' if it is not set,
       to set where checkouts for repository comparisons are done.

RETURN VALUES

       1 on invalid arguments or if a command called by the script failed, 0 otherwise. A return
       value of 0 on a compare operation does not necessarily indicate a clean comparison; only
       empty output does that.

BUGS

       CVS repositories have an unnamed default branch. This is not listed by "repotool
       branches"; if there are no named branches the output is empty.

       When a Subversion file is part of a mismatch, the displayed filename is missing its
       trunk/tag/branch location, which must be inferred from the way the comparison is invoked.

       Tag comparisons with git will not cope well with a branch name containing the string
       "detached".

       Due to extreme slowness of the Subversion checkout operation, the compare head, tag, and
       branch modes assume that if one of the directories is a Subversion checkout you have done
       a full checkout of HEAD before calling this tool; thus no svn update operation is required
       unless you give an -r option. Spurious errors will be reported if the directory is not a
       full checkout of HEAD. To avoid this optimization and force updating, do "-r HEAD".

REQUIREMENTS

       The export action is a wrapper around either native export facilities or the following
       engines: cvs-fast-export(1) (for CVS), svnadmin(1) (for SVN), reposurgeon itself (for hg).
       You must have the appropriate engine in your $PATH for whatever kind of repository you are
       streaming.

            [[see_also]]
           == SEE ALSO ==

       reposurgeon(1).

AUTHOR

       Eric S. Raymond esr@thyrsus.com. This tool is distributed with reposurgeon; see the
       project <http://www.catb.org/~esr/reposurgeon> page" .

                                            2022-01-12                                REPOTOOL(1)