Provided by: suck_4.3.4-1build1_amd64 bug

NAME

       rpost - post an article to an NNTP news server

SYNOPSIS

       rpost  [ hostname ] [ @filename ] [ -s | -S filename ] [ -e | -E filename ] [ -b batchfile
       ] [ -r rnews_file rnews_path ] [ -p prefix ] [ -Q ] [ -d ] [ -U userid ] [ -P password ] [
       -M ] [ -N port_number ] [ -l phrase_file ] [ -D ] [ -T timeout ] [ -u ] [ -n ]

       [ -F perl_file ] [ -i ] [ -z ] [ -f filter $$o=<outfile> filter_arg1 ...  ]

DESCRIPTION

       Rpost  will  post  one  or  more  articles,  specified  by  hostname.   If hostname is not
       specified,  rpost  will  use  the  environment  variable  NNTPSERVER.   The  hostname  may
       optionally  include  the port number, in the form Host:Port If this form is used, any port
       number specified via the -N option will be ignored.

Generic Options

       @filename

       This option tells rpost to read other options from a file in addition to the command line.

       -D This option tells rpost to log various debugging messages  to  "debug.suck",  primarily
       for use by the developer.

       -e|-E filename

       These options will send all error messages (normally displayed on stderr), to an alternate
       file.  The lower case version, -e, will send the error messages to the compiled-in default
       defined  in  suck_config.h.   The  default  is  suck.errlog.   The upper case version, -E,
       requires the filename parameter.  All error messages will then be sent to this file.

       -i

       This option tells rpost to ignore the 201 (no posting allowed) from the welcoming  message
       and  to  try  and post anyway.   Some news servers (inn-2.3.1) send 201 no posting allowed
       when they are using the AUTHINFO commands to verify permission to post.

       -l phrase_file

       This option tells rpost to load in an alternate phrase file, instead of using the built-in
       messages.   This  allows  you to have rpost print phrases in another language, or to allow
       you to customize the messages without re-building.  See the "FOREIGN LANGUAGE PHRASES"  in
       suck.1 for more details.

       -M

       This  option  tells  rpost to send the "mode reader" command to the remote server.  If you
       get an invalid command message from rpost immediately after the welcome announcement, then
       try this option.

       -n

       This option tells rpost to show the name of the file as it is being uploaded.

       -N port_number

       This  option tells rpost to use an alternate NNRP port number when connecting to the host,
       instead of the default port number, 119.

       -s|-S filename

       These options will send  all  status  messages  (normally  displayed  on  stdout),  to  an
       alternate  file.   The  lower  case  version,  -s,  will  send  the status messages to the
       compiled-in default defined in suck_config.h.  The default  is  /dev/null,  so  no  status
       messages  will be displayed.  The upper case version, -S, requires the filename parameter.
       All status messages will then be sent to this file.

       -T This option overrides the compiled-in TIMEOUT value. This is how long rpost  waits  for
       data from the remote host before timing out and aborting.

       -u  This  option tells rpost to send the AUTHINFO USER command immediately upon connect to
       the remote server, rather than wait for a request for authorization.  You must supply  the
       -U and -P options when you use this option.

       -U userid -P password

       These  two  options  let  you  specify a userid and password, if your NNTP server requires
       them.

       -Q

       This option allows you to specify the userid and password via  the  environment  variables
       "NNTP_USER"  and  "NNTP_PASS"  instead  of on the command line.  This prevents a potential
       security issue where someone doing a ps command can see your login and password.

       -z This option tells rpost to use SSL to communicate with the remote  hosts,  if  SSL  was
       compiled into rpost.

STDIN MODE

       rpost

       rpost hostname

       rpost  reads one article from stdin and sends it to the NNTP server. The article must have
       a header of at least two lines, namely Newsgroups: and Subject: and a body (the  article).
       Header  and  body have to be separated by a newline.  Rpost does not change the article in
       any way.

       Rpost uses the POST command to post your article, just like any standard newsreader.  This
       is  handy  when  using SLIP and PPP, since most providers do not allow any other method to
       post articles (such as nntpsend or innxmit).

BATCH MODE

       rpost hostname -b batchfile -p prefix -d

       This batch mode allows you to give rpost a list of articles, and have them all posted.

       -b batchfile

       A listing of the articles to be posted.  This parameter is REQUIRED.  This  file  contains
       one article per line, with the line being the path to the file containing the article. For
       example:

              -b /usr/spool/news/out.going/pixi

       IF there are any problems uploading a specific article, a "failed" file will  be  created.
       It  will  be  called  "batchfile".fail,  and  contain the line from this batchfile for the
       article(s) that did not successfully upload.  This file can be used to re-run  the  failed
       messages through rpost.  NOTE: duplicate articles are NOT considered an error for the fail
       file.

       -d

       If the upload of articles is successful, this option will cause rpost to
        delete the batchfile named in the -b option.

       -p prefix

       If the batchfile does not contain a full path, but rather a partial path,  this  parameter
       must  be  specified.   This is useful when the batch file is generated by another program.
       For example, Inn lists the path in the out.going  file  relative  to  its  base  directory
       /usr/spool/news.  In that case just use:

               -p /usr/spool/news

RNEWS MODE

       rpost hostname -r rnews_file rnews_path

       This  option  allows  you  to  use  rnews  generated  file(s)  to  post.   It requires two
       parameters.

       rnews_file - this is the base name for the rnews files.  If you have  your  rnews  file(s)
       called batch1, batch2, etc., then this argument would be "batch".

       rnews_path - this is the path to the location of the rnews files.
              -r batch /usr/tmp/rnews

       -d

       If  the  upload  of  all the articles from any of the rnews files is successful, then this
       option will cause rpost to delete that particular rnews file.

FILTER MODES

       -f filter $$o=<outfile> filter_arg1 filter_arg2 ...

       In many cases, each article must be massaged before the remote NNTP will accept it.   This
       option, and the embedded perl filter option below, lets you do that.  These filters do not
       work in STDIN mode, but in the batch and rnews modes from above.  Note that  the  -f  ....
       option  must  be  the  LAST option, as everything that follows it is passed to the filter,
       except as noted below.  There are three required parameters with this:

       $$o=<outfile>  - <outfile> is the name of the file produced by your filter that  will  get
       uploaded  to the remote NNTP server.  THIS IS NOT passed to your filter program.  This can
       be specified anywhere on the command line AFTER the -f filter argument, either before  the
       filter name, or after it.

       filter  -  name  of the program to call.  Whatever follows filter, EXCEPT for the $$o, are
       arguments passed to the filter.

       arg1 - The first argument to your filter program/script.  It  most  likely  will  be  $$i,
       which rpost fills in with the name of the article that needs to be cleaned up.

       arg2 ... - any additional args needed can be specified.

       Let's  clarify  this  a  bit  with  an  example.   Some NNTP servers don't like to receive
       articles with the NNTP-Posting-Host filled in.  Create a short shell script to delete this
       from a file:


       -myscr--------------------------------------------
       #!/bin/sh

       sed -e "/^NNTP-Posting-Host/d" $1 > $2


       -end myscr----------------------------------------
       Then call rpost like this:
              rpost  localhost -b /usr/spool/news/out.going/pixi -f myscr \$\$o=/tmp/FILTERED_MSG
              \$\$i /tmp/FILTERED_MSG

       Then, before each article is uploaded, myscr is called like such:
              myscr infilename /tmp/FILTERED_MSG

       After  myscr  has  finished,  rpost  uploads   the   cleaned   up   article,   stored   in
       /tmp/FILTERED_MSG, to the remote NNTP server.

NOTE:

       The  $$o and $$i have to be escaped, using either the backslashes as above, or with single
       quotes, to prevent the shell from trying to interpret  these  as  variables.   Failure  to
       escape them will result in rpost not working!

       -F perlfilter

       This  option  allows you to use an embedded perl filter to filter your articles.  In order
       to use this, you must edit the Makefile, and define the various PERL_ options.  It  has  a
       couple  of advantages over the -f option above.  Because it is embedded perl, there are no
       forks and execls() done, so it should be faster.  Also, you don't need to worry about  the
       arguments to the program and escaping $$, etc as above.

       Rpost  will,  when  it  starts up, load in the perlfilter file designated and parse it for
       syntax errors.  Then, for each article to be uploaded,  rpost  will  call  the  subroutine
       "perl_rpost",  contained  in  the  perlfilter file.  See sample/put.news.pl for a complete
       working example.  There are three key points you need to be aware of  when  creating  your
       filter.

              1.  The perlfilter file must contain the line "package Embed::Persistant;", so that
              variables in the  perlfilter  file  don't  clash  with  rpost  variables,  and  the
              subroutine  must  be  called  "perl_rpost".   This  can  be changed by editting the
              PERL_RPOST_SUB define in suck_config.h.

              2. The perl_rpost subroutine receives the input file name as its sole argument, and
              must  return  the  full  path  to  the location of the filtered article as a single
              scalar string (return $outfile).

              3. The subroutine must explicitly close the output file  (containing  the  filtered
              argument)  before it returns.  This is because perl will only do an automatic close
              upon program completion (in our case when rpost exits), or when the file handle  is
              reused  (the  next  time the subroutine is called).  If the close is not done, then
              more than likely, a 0 byte file will exist when rpost tries to  post  the  article,
              and errors will result.

WARNING:

       Be very careful with what the filter program deletes from the article.  Deleting the wrong
       line can have bad effects later on.  For example, do not delete the MSG-ID line,  as  this
       could  cause  a  single message to be posted many times, depending on the configuration of
       both the local and remote newserver.

RPOST ARGUMENT FILE

       If you specify @filename on the command line, rpost will read from filename and  parse  it
       for  any arguments that you wish to pass to rpost.  You specify the same arguments in this
       file as you do on the command line.  The arguments can be on one line, or spread out among
       more than one line.  You may also use comments.  Comments begin with '#' and go to the end
       of a line.  All command line arguments override arguments in the file.  One  advantage  to
       using  the  file instead of the command line, is that you don't have to escape any special
       characters, such as $.

              # Sample Argument file
              -b batch # batch file option
              -M   # use mode reader option

EXIT VALUES

       Rpost returns the following exit values:

              0 = success
              1 = error posting an article
              2 = unable to do NNTP authorization with the remote server.
              3 = unexpected answer to command when doing NNTP authorization.
              -1 = other fatal error.

SEE ALSO

       suck(1), testhost(1), lpost(1).

                                                                                         RPOST(1)