NAME

       ipc - SWUpdate IPC tool

       swupdate-ipc sends a specific command to SWUpdate. The following commands are enabled:

AES

       send a new aes key to SWUpdate

SETVERSION

       sends a range of versions that can be accepted.

GETHAWKBIT

       return status of the connection to Hawkbit.

SENDTOHAWKBIT

       send  data to the Hawkbit Server.  A typical use case is acknowledgement for activation by
       an application or operator after a new software has been installed.  The tool can  forward
       the result for the activation to the hawkBit server.

SYSRESTART

       send a restart command after a network update

SYNOPSIS

       swupdate-ipc <cmd> [option]

       Where cmd is one of the listed above.

DESCRIPTION

       aes <key> <ivt>
              AES key to be used for decryption

       setversion <min> <max> <current>
              configure the accepted range of versions

       hawkbitcfg
              configuration for Hawkbit Module

       -h     help

       -p     allows one to set the polling time (in seconds)

       -e     enable suricatta mode

       -d     disable suricatta mode

       swupdate-sendtohawkbit  <action  id> <status> <finished> <execution> <detail 1> <detail 2>
       ..
              Send Acknolwedge to Hawkbit server after an update if SWUpdate is set to wait for.

       sysrestart
              Used with SWU handler, allow to perform a network restart

       -r     optionally reboot the target after a successful update

       -w     waits for a SWUpdate connection instead of exit with error

       -s <path>
              path to progress IPC socket

COPYRIGHT

       2013-2022, Stefano Babic